2 speed gear

6431 FG Steel pinion 16 teeth

Genuine FG spare/option part.For combination with 48T main and differential spur gear.Diameter: 26.7 mmBore: 10 mmTotal width: 16 mmTooth width: 9.5 mmModule: m=1,5Contents:1 piece

€26.90*

6432 FG Steel pinion 18 teeth - 1pce.

Item N° 6432 Steel pinion 18 teeth - 1pce.For combination with 46T main spur gear.Diameter 29,7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

€35.00*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

7431 FG Steel gearwheel hardened 22 teeth - 1pce.

Item N° 7431 Steel gearwheel hardened 22 teeth - 1pce.Suitable for 42 teeth main gear wheel.Diameter 35,7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5

€27.80*

6431/01 FG Steel pinion 16 teeth, wide - 1pce.

Item N° 6431/01 Steel pinion 16 teeth, wide - 1pce.For use on the clutch bell of FG monster cars.Diameter 26.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

€33.90*

7427/01 FG Plastic gearwheel 40 teeth 2-speed - 1pce.

Suitable for all 1:5 models with 2-speed gear.Diameter 63 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€18.90*

6733/06 FG Thread pin M6x6mm - 15 pcs.

Item N° 6733/06 Thread pin M6x6mm Tuflock - 15 pcs.

€2.50*

7433 FG Steel gearwheel hardened 26 teeth - 1pce.

Item N° 7433 Steel gearwheel hardened 26 teeth - 1pce.Suitable for 38 teeth main gear wheel.Diameter 41.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5

€29.90*

6046 FG Steel pinion 14 teeth

Genuine FG spare/option part. True running steel pinion for minimized wear. Application: Layshaft pinion on all FG monster cars, not for use on the clutchbell.Dimensions:Diameter: 25 mmBore: 10 mmTotal width: 18 mmTooth width: 11.5 mmModule: m=1,5Contents:1 piece

€31.50*

HT-Nitrited steel pinions for all FG and 1/5 scale Carson / Smartech C5

Non-standard sizes use two numbers for definition. The second number gives the size of the corresponding ring gear.Attention: not suitable for 1/6 scale Smartech / Carson 2WD Off-Road models. (Link to the Carson Smartech pinions: here)Pinions up to 16T can be used on the layshaft as well.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.Teeth:Item no.:13 Teeth HT y026814 Teeth FG 604614 to 48 Teeth HT y011615 to 48 Teeth FG 604715 to 48 Teeth HT y19354 wide16 to 48 Teeth FG 643116 to 48 Teeth FG 6431/1 wide17 to 48 Teeth HT y19355-116 to 46 Teeth HT y011917 to 46 Teeth HT y1935518 to 46 Teeth FG 643219 to 46 Teeth HT y1935718 to 44 Teeth HT y012319 to 44 Teeth FG 6432/220 to 44 Teeth FG 643321 to 44 Teeth HT y1935820 to 42 Teeth HT y090421 to 42 Teeth FG 7431/2122 to 42 Teeth FG 743121 to 40 Teeth FG 7432/2122 to 40 Teeth FG 7432/2223 to 40 Teeth FG 7432/2324 to 40 Teeth FG 743225 to 40 Teeth FG 7432/2526 to 40 Teeth HT y1936426 to 38 Teeth FG 7433Contents:1 piece

€29.90*

Configure now

66217 FG Steel pinion 14T narrow, 1pce.

Item N° 66217 Steel pinion 14T narrow, 1pce.Layshaft pinion for FG 4WD cars, 10 mm bore diameter, tooth width 9.25 mm, total width 15.6 mm, outer diameter 25.7 mm.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.

€29.95*

6433 FG Steel pinion 20 teeth - 1pce.

Item N° 6433 Steel pinion 20 teeth - 1pce.For combination with 44T main spur gear.Diameter 32.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

€37.00*

66217/01 FG Steel pinion 15T narrow, 1pce.

Item N° 66217/01 Steel pinion 15T narrow, 1pce.Layshaft pinion for FG 4WD cars, 10 mm bore diameter.Module: m=1,5

€29.95*

7432 FG Steel gearwheel hardened 24 teeth - 1pce.

Item N° 7432 Steel gearwheel hardened 24 teeth - 1pce.Suitable for 39, 40 and 41 teeth main gear wheel.Diameter 38.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5

€30.50*

7432/25 FG Steel gearwheel hardened 25 teeth

Suitable for 39, 40 and 41 teeth main gear wheel.Measures:Diameter: 38,7 mmBore: 10 mmTotal width: 18 mmTooth width: 11,5 mmModule: m=1.5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.Content:1 piece

€34.50*

7450 FG 2-speed gear box 1:5 2WD

2-speed gear box, retrofotting is possible for Smartech/Carson C5, all 1:5 2WD FG models except Formula 1 + FG EVO 2020, adjustable shift point, high reliability, gear wheels can be changed in no time. During a competition we recommend to use the small gearwheels with 16-26 teeth in alloy oder steel.If you use the gear wheels (38 teeth) you need the alloy hub A 47mm ().Contained pinions: 22 to 42 teeth and 24 to 40 teeth.Contents:1 piece

€229.50*

7452 FG 2-speed gear box 1:5 4WD for Sportsline 4WD, set

Genuine FG spare/option part.Fits FG cars with 510 mm and 535 mm wheelbase. Not suitable for Competition and Formular 1 models.Included gears:1st gear: 22T / 42T2nd gear: 24T / 40T2-speed gear box, retrofitting is possible for all FG 1:5 Sportsline 4WD models. Adjustable shit point, built very robustly, therefore high reliability gearwheels can be replaced in not time. The small gearwheels are made of hardened steel. If you use the gearwheel 7424/01 (38 teeth) you need the allow hub A 47 mm 7456/01.

€229.50*

HT-Alloy pinions for FG and Carson C5 / R5, 1 pce.

zahn_0003 Size: y19418 - 18/46 coated surface

Hard coated surface for wear protection.Non-standard sizes use two numbers for definition. The second number gives the size of the corresponding ring gear.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€29.90*

7432/23 FG Steel gearwheel hardened 23 teeth - 1pce.

Item N° 7432/23 Steel gearwheel hardened 23 teeth - 1pce.Suitable for 39, 40 and 41 teeth main gear wheel.Diameter 38.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€33.90*

7430/24 FG Alloy gearwheel 24 teeth

Genuine FG spare/option part. Extreme light alloy gear wheel in anodizing quality with 24 teeth.Suitable for the gear wheels with 39, 40 and 41 teeth.Dimensions:Diameter: 38,7 mmBore: 10 mmTotal width: 18 mmTooth width: 11,5 mmModule: m=1,5Contents:1 piece

€30.20*

6432/01 FG Steel pinion 18 teeth 2-speed - 1pce.

Item N° 6432/01 Steel pinion 18 teeth 2-speed - 1pce.For combination with 46T main spur gear on 2-speed spur gear only.Diameter 29.7 mmBore 10 mmTotal width 16 mmTooth width 9.5 mmModule: m=1,5

€35.00*

6432/17 FG Steel gearwheel 17 teeth, profile displaced, 1 pce.

Item N° 6432/17 Steel gearwheel 17 teeth, profile displaced, 1 pce. True running steel pinion for minimized wear. Suitable for all FG cars except Formula 1. Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.

€33.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

7052/01 FG Plastic gear wheel 42 teeth 2-speed

Genuine FG spare/option part. Gearwheel with 42 teeth for the layshaft. Only for the 2 speed box.Dimensions:Diameter: 66 mmWidth: 15,5 mmTooth width: 12 mmModule: m=1,5Content:1 piece

€17.50*

6432/02 FG Steel pinion 19 teeth - 1pce.

Item N° 6432/02 Steel pinion 19 teeth - 1pce.For combination with 44T main spur gear.Diameter 32.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€35.00*

7431/21 FG Steel gearwheel hardened 21 teeth - 1pce.

Item N° 7431/21 Steel gearwheel hardened 21 teeth - 1pce.Suitable for 42 teeth main gear wheel.Diameter 35.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€27.80*

Filter products

2 speed gear