LOS45017/SR Original Losi DBXL-E 2.0 complete tyre
Product information "LOS45017/SR Original Losi DBXL-E 2.0 complete tyre"
Genuine Losi DBXL-E 2.0 spare/option part.
Some of our customers order their Losi DBXL-E 2.0 with with optional MadMax rims and tires. Therefore we currently have an excess stock of genuine Losi DBXL-E 2.0 tire sets, that we can offer you at an extremely low price Complete mounted and original Losi DBXL-E 2.0 tires.
Consists of parts from the following genuine Losi DBXL-E 2.0:
- LOS45032 / LOS45033 Losi Wheels, Silver, red Bead Lock
- LOS45018 Losi Tire Insert, Molded
- LOS45017 Losi Tire, Creepy Crawler
Contents:
- 1 pair / 2 piece
Login
Customers also bought
Genuine HT spare/option part.Zinc-coated steel band with special fastening tabDimensions:Width: 11 mmDiameter range: 15 to 24 mmContents:2 pieces
Genuine Losi spare/option part.Contents:1 piece
Genuine Losi spare/option part. Contents:10 pieces
Genuine FG spare/option part.For all Zenoah / CY / Fuelie / PT engines.Applications:Click here!Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:2 pieces
Item N° 6504 Thread lockink compound, medium, 1 pce.Screw retention medium for securing and sealing of screws, nuts, bolts a.s.o. Also suitable for galvanized parts. Temperature stability: between -55° to 155°C. Temperature stability: between -55° to 155°C.
Genuine Mielke spare/option part.The tuned pipe system from premium manufacturer M. Mielke was specifically designed for Losi DBXL 2.0 in combination with large displacement and modified engines.The elaborate, angled design, makes best use of the available space in the DBXL 2.0 allowing for optimum performance! When designing the system, it was especially important to maximize the distance to the battery box of the DBXL 2.0 in order to minimize the thermal load on the battery. At the same time, the large distance improves access to Box. Contents:1 set
Similar products
CROSS BOND 170 x 80 mm and 170 x 60 mm tires with black MadMax Extreme 20 bolt-beadlock rims with 24 mm hex drive and reinforced beadlock rings were designed for use on loose surfaces. The extremely rigid and differently structured lugs of the CROSS BOND ensure optimum power transmission and also allow for excellent grip on loose surfaces, such as sand and soil. The lugs are raised at the treads outside, and therefore provide maximum grip, particularly when cornering where the tire is canted to the outside. Due to the extreme load created by the MadMax CROSS BOND tires the rim was optimized again with a reinforcement ring.The tires are fitted with a special rigid insert, which can handle the cornering forces and maintain the tires shape even on heavy cars. We recommend to check the beadlock screws after the run. Dimensions:Outer diameter: 170 mmFront tire width: 60 mmRear tire width: 80 mmReinforced 24 mm hex driveThe video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!
%
Genuine Losi DBXL-E 2.0 spare/option part. Some of our customers order their Losi DBXL-E 2.0 with with optional MadMax rims and tires. Therefore we currently have an excess stock of genuine Losi DBXL-E 2.0 tire sets, that we can offer you at an extremely low price Complete mounted and original Losi DBXL-E 2.0 tires.One pair (two pieces) of complete OEM wheels, as it comes with the Losi DBXL-E 2.0; one each l/h and r/h version. Different colors to choose from.Consists of parts from the following genuine Losi DBXL-E 2.0: LOS45032 / LOS45033 Losi Wheels, Silver, red Bead Lock LOS45018 Losi Tire Insert, Molded LOS45017 Losi Tire, Creepy Crawler Regular price for this set: 146,97 for two pieces!Contents:1 pair / 2 piece
Genuine Carson spare/option part. Contents:2 pieces / 1 pair
Genuine ARRMA spare/option part. This dBoots COPPERHEAD2 MT tire set will plough through rough terrain on a wide range of surfaces. With bigger tread blocks, a thicker carcass, a bigger overall diameter and added internal ribbing compared to the SB version, these heavy-duty tires offer increased durability when the action gets wildFeaturesTires: Aggressive tread pattern for excellent traction on all off-road surfaces - Big tread blocks - Thick carcass - Extra internal ribbing - Durable material compound for long-lasting performance - Pre-glued for trouble-free fit and servicingWheels: Multi-spoke design for stylish looks and increased strength - Tough nylon for durability on all surfaces - Black color for head-turning ARRMA styling - Steel reinforced 24mm Hex for strength during extreme driving action and easy servicingFoam Inserts: High-quality foam with excellent support for the tire tread - Specially designed to give the perfect balance of aggressive grip and easy handling characteristicsTECHNICAL INFORMATION:Wheel bead diameter: 4.8" (122mm)Width: 4.17" (106mm)Wheel hex size: 24mmOverall diameter: 8.31" (211mm)Contents:1 Pair / 2 pieces
Genuine ARRMA spare/option part. Tires: Multi-surface chunky tread pattern for awesome traction in all conditions - High-quality rubber for long-lasting durability - Pre-glued for trouble-free fit and servicingWheels: Multi-spoke design for stylish looks and increased strength - Tough nylon for durability on all surfaces - Black color for head-turning ARRMA styling - Steel reinforced 24mm Hex for strength during extreme driving action and easy servicingFoam Inserts: High-quality foam with excellent support for the tire tread - Specially designed to give the perfect balance of aggressive grip and easy handling characteristicsTECHNICAL INFORMATION: Wheel bead diameter: 4.9" (124mm) Width: 3.98" (101mm) Wheel hex size: 24mm Overall diameter: 8" (203mm) Contents:1 pair / 2 pieces
Genuine ARRMA spare/option part. Contents:2 pieces
%
Genuine Losi 5ive-T 2.0 spare/option part.Some of our customers order their Losi 5ive-T 2.0 with with optional MadMax rims and tires. Therefore we currently have an excess stock of genuine Losi 5ive-T 2.0 tire sets, that we can offer you at an extremely low price Complete mounted and original Losi 5ive-T 2.0 tires.Consists of parts from the following genuine Losi 5ive-T 2.0 sets: LOS45022 Losi Wheel & Beadlock Set, Grey, 5ive-T 2.0 LOS45023 Losi Tire Set, Firm, 5ive-T 2.0 LOSB7241 Tire Inserts front/rear, Soft One pair (two pieces) of complete OEM wheels, as it comes with the Losi 5ive-T 2.0; one each l/h and r/h version. In our shopping selection 2 pairs at a special price! Regular price for this set: 143,95 for two piecesDimensions:Width: 70 mmDiameter: 180 mm24 mm reinforced Wheel hex (Losi and HPI and other)Contents:2 pieces / 1 pair
Genuine Carson spare/option part. Contents:2 pieces / 1 pair
%
jan_2024_26 Units:
1 pair / 2 pieces
Genuine Losi DBXL-E 2.0 spare/option part. Some of our customers order their Losi DBXL-E 2.0 with with optional MadMax rims and tires. Therefore we currently have an excess stock of genuine Losi DBXL-E 2.0 tire sets, that we can offer you at an extremely low price Complete mounted and original Losi DBXL-E 2.0 tires.Consists of parts from the following genuine Losi DBXL-E 2.0: LOS45032 / LOS45033 Losi Wheels, Silver, red Bead Lock LOS45018 Losi Tire Insert, Molded LOS45017 Losi Tire, Creepy Crawler Regular price for this set: 146,97 for two pieces!Contents:1 pair / 2 piece
Genuine UFRC spare/option part. Original equipment tires of the Ghost Rabbit GR1.Fits Losi MTXL as well.When using our special wheel nuts TT1020/02 these tires can also be mounted on the Traxxas X-Maxx.Tire with vulcanized Kevlar belt, speed resistant (no ballooning) and yet flexible.Rim with steel hex insert.Diameter 230 mm, width 100 mm, 24 mm hex wheel drive.Rim thickness at center hole: 8.75 mm.Hex depth: 8 mm.Weight: approx. 2160 grams/pairOn the Losi DBXL running these wheels requires the installation of the DBXL024 ATOP axle extenders!Contents:2 pieces
Customers also viewed
%
SUPER GRIP 170 x 80 mm and 170 x 60 mm with black MadMax Extreme rims for 18 mm square or 24 mm hex wheel drive, 20 beadlock screws per rim and reinforced silver beadlock rings. Fits FG, Smartech, Losi 5ive-T, 5ive Mini, Desert Buggy XL and all HPI Baja 5B and 5T/SC cars.Due to the extreme stress created by the MadMax SUPER GRIP tires, the rim has been optimized again.The tires come with a special rigid insert which transfers the applied forces without tilting; even with the heaviest cars like the Losi 5ive-T.All together, the SUPER GRIP lives up to its name and provides maximum grip, which makes it necessary to use the supplied 3 mm beadlock screws for the MadMax EXTREME rims instead of the usual 2.5 mm screws. Additionally, the seating of these screws should be checked after each use.The MadMax SUPERGRIP tires have been designed especially for use on tarmac. Even on fine-pored tarmac your car will still find enough grip! (As you can see in our video.) On most 1/5 and 1/6 cars the best combination is the use of 60 mm wide front and 80 mm wide rear tires. The Losi 5ive-T and Super Baja Rey should run 60 mm wide MadMax SUPERGRIP tires all around, because the 80 mm wide SUPERGRIP tires are a bit too wide for the body shell.The 80 mm wide MadMax tires are reinforced on the inside of the carcass with a special cross pattern in the tread section and ribs in the outside shoulder.The MadMax SUPERGRIP has a special on-road tread. These tires have excellent grip even after eating up the tread and can be used after that for a long time as slicks!MadMax SUPERGRIP spare rubber can be found here: MadMax SUPER GRIP spare part Some off-road tires knowledge can be found here!
Genuine H.A.R.M spare/option part.Contents:1 piece
Genuine Losi spare/option part. Contents:1 pair / 2 pieces
%
The off-road tire for hard packed dirt and spectacular drifts!Gives great results on those carpets which are typical for some off-road tracks. 616 grippy square studs per tire, a total of more then 2.400 for a complete set of tires, guarantee maximum traction! The lower profile of the outer stud rows reduces lateral traction and guarantee exceptional directional stability and allows for spectacular drifts! Therefore the car is less prone to undesirable side rolls!The Narrow-Grip 616 tires are mounted on a flexible 10 spoke rim with steel ring reinforced 24 mm hex drive. 10 screws per beadlock ring keep the tires in place. The Narrow-Grip 616 tires feature a firm foam insert, making them suitable even for heavier weight cars.To prevent premature wheel drive wear the fit to the rim is very tight. Therefore the rim should be properly aligned with the hex drive and completely mounted via tightening the wheel nut! Attention: When using the Narrow-Grip wheels on a Super Losi Rock-Rey model, special wheel hexes are required. Also on FG and Carson models. For mounting on a Traxxas X-MAXX you need a set of special Top-Tuning wheel nuts. Both are available as an option from our shopping cart menu. Dimensions:Outer tire diameter: 180 mmTire and rim width: 60 mmRim inner diameter: 120 mmWeight for one tire: 430 grams / for a pair: 860 grams24 mm hex for Losi 5IVE-T, HPI Baja 5, MCD Wheels drives:24 mm hex for Losi 5IVE-T, HPI Baja 5 and MCD ccars.
BUILD YOUR OWN ORIGINAL,AUTHENTIC HPI BAJA 5BHPI large scale fans, we have heard you! The one and only original HPI Baja 5B is BACK and ready for you to build from the ground up! The HPI SBK collection of Self Build Kits grows with the addition of not just one, but TWO 1/5th scale HPI kits! Fans of large scale off-road RC will be super excited to build their own gas-powered 1/5th scale Buggy with the HPI Baja 5B Self Build Kit!When the HPI Baja 5B buggy was first introduced, large scale RC was very expensive and quite difficult for the average RC hobbyist to experience. Using highly durable parts and innovative design features, HPI brought large scale off-road to new enthusiasts and ushered in a new, BIGGER era of RC!Now, YOU can build and own the legend! Experience the thrill and excitement of building a car which ends up being over 80cm (nearly 32 inches) long and weighing nearly 10kg (over 21 lb)! Just install your own engine and electronics as you build the HPI Baja 5B and you'll be ready for any adventure that comes your way!With extra-tough drivetrain parts like the viscous torque differential, super-durable composite spur gear with internal damping and all-metal drivetrain, the HPI Baja 5B is ready for your 23-32cc 2-stroke engine so you can experience the joy of gas-powered RC and up to 30-minute runtimes!The HPI Baja 5B is also equipped with extra-big and super-tough suspension parts, featuring awesome HPI durability! With its expertly designed molded composite suspension plus extra-long adjustable HD shocks, and massive high impact nylon 3-piece beadlock wheels, the Baja 5B is ready for full-speed racing on any off-road circuit!The 4mm thick 6061 aluminum monocoque chassis gives the HPI Baja 5B the classic desert racing buggy look. Precisely bent into shape for maximum strength, the chassis provides the mounting points for the engine and suspension, forming the backbone of the car. Precise steering is provided by a dual-bellcrank rack and cam-type servo saver. Aluminum parts are anodized in cool gunmetal and the classic Baja desert racer clear polycarbonate body is included in the SBK kit, ready for your custom racing scheme!The Baja 5B SBK is a great addition to your HPI collection, as well as a fabulous introduction to large scale buggies!RACING CHASSIS DESIGN & LAYOUTThe narrow channel chassis made from rigid 4mm 6061 aircraft aluminum and gives the HPI Baja 5B a classic desert racing buggy look and extreme stiffness and durability. The U-shaped chassis is protected at the rear with a thick plastic skid plate for extra protection to the motor and drivetrain.The tube roll cage is made of high impact nylon and topped with a real aluminum roof to carry on the classic looks. The roll cage is fully functional and protects the motor and internals from crash damage. The roll cage, radio box, body panels, wing, undertray and gear case are all mounted with fast access clips for easy maintenance. To finish you need: Engine with clutch and exhaust Remote control with servos and receiver battery Charger Two cans of Lexan paint Features Summary Unassembled 1/5th scale electric-powered Off-Road Buggy Ready for your 6S or 8S LiPo electronics Streamlined HPI Baja 5B Flux body design Adjustable motor mount Adjustable HD shock absorbers Monocoque chassis Low CG for superior handling Long travel suspension Viscous torque oil-filled gear differential All-terrain tires Beadlock wheels with metal insert hubs Aluminum rear shock tower Hard plastic skid plates Adjustable rear wing Quick access to all critical maintenance points Dual bellcrank steering Cam type servo saver Hex socket hardware Gunmetal anodizing Full set of rubber-sealed ball bearings Enclosed receiver box Chassis Specifications Overall Length 817mm Height: 255mm Width: Front - 460mm; Rear - 480mm Tire Track (to center of tires): Front - 395mm; Rear - 400mm Wheelbase: 570mm Ride Height: 76mm Suspension Travel: Front - 95mm; Rear - 100mm Weight: 9.6kg (21.3lb) Adjustable Camber: front - shims; rear - screw Front caster: adjustable with shim 22 / 25.5* / 29 degrees (* stock) Toe-in: Front adjustable with tie rod; Rear adjustable with inserts 0-4 degrees (3 degrees stock set-up) Aircraft aluminum 6061 T6 monocoque chassis Double wishbone suspension with adjustable roll center F/R Drive system: HD metal gears with sealed gear box (8.382:1 gear ratio) Differential: viscous torque control with 4 pinion gears; sealed diff case with silicone oil Shock absorber: HD Aluminum coilover shock absorber with fully adjustable preload collar Wheel type: 3-piece beadlock design, high impact nylon material with inset heavy-duty metal hex hub