Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

4478/01 FG Alloy riser plates for rear axle, Race Truck

Product information "4478/01 FG Alloy riser plates for rear axle, Race Truck"

Genuine FG spare/option part.

Especially for FG Race-Truck. With a height from 18 mm.

Content:
  • 2 pieces (right and left

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

1063/02 FG Spacer bushing, rear axle brace Evo truck 04 - 08
Genuine FG spare/option part. When installing the higher Truck rear axle riser plates, these spacer are needed to compensate for the increased height difference between engine mounts (1063/01 and 1040/05) and rear axle brace 1063.Small spacer: 8 mm hex, 9.1 mm height, 4 mm bore.Large spacer: 10 mm hex, 9.1 mm height, 5 mm bore.You'll need a longer screw (M4x20) for installation of the r/h engine bracket 1063/01.Fits for Evo 04 - 08. Contents:2 pieces

€4.90*

Average rating of 0 out of 5 stars

1106 FG Alloy front riser blocks truck Evo 08-14
Genuine FG spare/option part. for Evo 08-14 with the newer front axle.Is needed to compensate for the larger diameter of the truck wheels.Dimensions:Length: 86 mmheight: 8 mmwidth: 8 mmContents:2 pieces

€19.95*

Average rating of 0 out of 5 stars

9452/02 FG Filling and ventilation set
Genuine FG spare/option part. Spare part 9440.

€4.70*

Average rating of 0 out of 5 stars

y1041 Angle connector 90° for hydraulic brakes - 1 pce
Angle connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Connecting thread M5

€12.90*

Average rating of 0 out of 5 stars

y1042 Angle connector 45° for hydraulic brakes - 1 pce
Angle connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Connecting thread M5

€12.90*

Average rating of 0 out of 5 stars

3000-23 Mecatech Bottle oil 50 ml
Genuine Mecatech spare/option part. Replacement part for Mecatech Cross Hydro. Content:1 piece / 50 ml

Content: 50 Milliliter (€154.00* / 1000 Milliliter)

€7.70*

Similar products

Average rating of 0 out of 5 stars

4483 FG CFK-body mount front, adjustable
Genuine FG spare/option part. Suitable for all FG touring cars and GT models. Not for Mercedes C291 and Porsche GT1.Contents:1 set

€45.90*

Average rating of 0 out of 5 stars

4481 FG Carbon fiber rear reinforcement plate
Genuine FG spare/option part. By mounting the carbon fiber reinforcement deformation of the rear plastic damper plate can be minimized. Recommended at higher ambient temperatures.Suitable for all FG models except Evo and Formel 1.Contents:1 piece

€96.50*

Average rating of 0 out of 5 stars

4478 FG Alloy riser plates for rear axle
Genuine FG spare/option part. The complete rear axle assembly is bolted to the solid alloy riser plates. You can now install this unit with only 4 countersunk screws to the chassis, which makes for a very fast change of the complete end.Replacement for plastic base plate FG 7068.Height 9 mmContent:2 pieces

€44.95*

Average rating of 0 out of 5 stars

5013 FG Roll cage support left/right
Genuine FG spare/option part. A = 83 mm.Contents:2 pieces

€13.50*

Average rating of 0 out of 5 stars

4493/03 FG O-ring for servo saver
Genuine FG spare/option part. Spare part for 4493 and 4494. Thick: 3 mm.Contents:4 pieces

€3.70*

Average rating of 0 out of 5 stars

5014 FG RC-plate for 1:5/Truck/Leopard
Genuine FG spare/option part. Plastic radio plate for installation of up to 4 servos. Fits all FG street models (except Formula 1) and Leopard models.You will need FG #6118/05 for installation of any steering servo other than Hitec 805BB.Contents:1 piece

€19.90*

Average rating of 0 out of 5 stars

4516 FG Titanium steering rod left/right 6x65 mm
Genuine FG spare/option part. Corrosion resistant and 40 % less weight compared to steel.Fits all 1/5 models and race trucks.Content:2 pieces

€39.90*

Average rating of 0 out of 5 stars

5010/01 FG Alloy chassis Sportsline short wheelbase 465 mm
Genuine FG spare/option part. Replacement chassis for FG touring car EcoLine/SportsLine models with short wheel base 465 mm.4 mm alu-chassis. Contents:1 piece

€149.00*

Average rating of 0 out of 5 stars

4496 FG Tension adjuster for servo saver
Genuine FG spare/option part. Suitable for all FG servo saver for adjusting the spring tension in three steps.Contents:2 pieces

€17.50*

Average rating of 0 out of 5 stars

4525 Titanium FG front driving axle 9,5 mm
Genuine FG spare/option part. One-piece titanium front axle shaft with 9.5mm wheel square.orrosion resistant and 40 % less weight compared to steel.Diameter 8 mm.Contents:1 piece

€45.00*

Average rating of 0 out of 5 stars

4534/07 FG Titanium wishbone turnbuckle left/right M7x103 mm
Genuine spare/option part.Corrosion resistant and 40 % less weight compared to steel.Contents:2 pieces

€51.70*

Average rating of 0 out of 5 stars

4529 FG Titanium pushrod turnbuckle M6x80 mm
Genuine FG spare/option part. Corrosion resistant and 40 % less weight compared to steel.Contents:2 pieces

€45.00*

Customers also viewed

Average rating of 0 out of 5 stars

4478 FG Alloy riser plates for rear axle
Genuine FG spare/option part. The complete rear axle assembly is bolted to the solid alloy riser plates. You can now install this unit with only 4 countersunk screws to the chassis, which makes for a very fast change of the complete end.Replacement for plastic base plate FG 7068.Height 9 mmContent:2 pieces

€44.95*

Average rating of 0 out of 5 stars

4478/02 FG Alum. support for rear axle, 6 mm
Genuine FG spare/option part.The complete rear axle assembly is bolted to the solid alloy riser plates. You can now install this unit with only four countersunk screws to the chassis, which makes for a very fast change of the complete end.Suitable for FG 1:5 scale models, Race-Truck and Leopard models.Height: 6 mm.Please note: For installation of the new engine lowering parts (FG # 4478/02, 1040/10, 1057/02) for the FG EVO, 3 mm have to be machined off both lower mounting point from the fan cover (7341/08).The order number for the modified fan cover for Zenoah and CY engines is 7341/15!Contents:2 pieces

€44.95*
%

Average rating of 0 out of 5 stars

LOS05014V2T1/E Losi 5ive-T BEAST 2.0 V2 Electric 12S 1/5 4WD SCT BND grey/blue/white
When the original 5IVE-T was introduced the world of 1/5-scale off-road racing changed, and this iconic platform became one of the most successful and influential platforms to date. Now get ready for 2.0! The Losi 5IVE-T 2.0 BND: 1/5 4WD Gas Short Course Truck has all of the unrivaled performance of its predecessor and includes Bind-N-Drive technology, allowing you to pick the transmitter that best fits your lifestyle. Comes with y1549/01 ZTW Beast Pro 300A 12S ESC and 520KV brushless motor and TT1021 Top Tuning Electric conversion kit for the ZTW BEAST version included.The revised chassis layout reduces the front drive shaft angle for improved durability and increased 4WD balance. Plus, the new rack style bellcrank steering assembly makes for easy Ackermann changes and overall improved steering geometry. Additional advances include an updated front hood, and hard anodized bleeder caps and shock bodies for improved shock performance. All this ensures the 5IVE-T 2.0 continues to reign supreme.Key FeaturesTT56112/520 Top Tuning Beast Brushless Motor 520 kVy1549/01 ZTW Beast Pro 300A 12S ESCInnovative Bind-N-DriveSpektrum 6200A DSMR 6-Ch AVC Telemetrie receiverImproved bar style steering rack with adjustable AckermannImproved center differential orientationImproved drive line angleHeavy-duty brakesTough steering and gas/throttle servo braceExtra-large 800cc capacity fuel tank What's in the Box?Losi 5IVE-T® 2.0 BND 4WD SCTSpektrum 6200A DSMR 6-Ch AVC Telemetrie receiverS900S 1/5 Scale Metal Gear Steering ServoWheel WrenchRod End/Shock End toolMulti WrenchSpark Plug WrenchBind Plug2.0mm, 2.5mm, 3.0mm, 4.0mm Allen WrenchesProduct ManualEC8 plug connection for optimum power transmission18 teeth pinion y1549 ZTW Beast Pro 300A 12S ESCSpecification:Continuous Current: 300ABurst Current: 1800ABEC: 6,0 V/7,4 V einstellbar / 8 ABattery NIXX / LiPo: 18 - 36NC / 6-12S LiPoWidth: 74 mmLength: 115 mmHeight: 78 mmWeight: 500gProgrammable: JaWater protected componentsTT56112/520 Top Tuning Beast Brushless Motor 520 kVSpecifications:Max. Amps: 129AMax. Voltage: 8-14SMax. Power: 7.350WKV (RPM/Volt): 520KVResistance: 0,0095Mounting hole depth: 8 mmCase diameter: 57,8Case length: 112 mmFree shaft length: 30 mmShaft diameter: 8 mmWeight: 1260g Dimensions Height: 181 mm Length: 965 mm Width: 520 mm Weight: 17 kg For operation the transmitter, as well as batteries and a charger are required. Driving batteries with the following maximum dimensions can be installed: Length: 165 mm Width: 51 mm Height: variable The speed controller (ESC) requires EC8 connections or corresponding ! Contents:1 piece If you run the maximum operating voltage approved for an esc, there is a risk, especially in large scale cars, that under certain circumstances the reverse currents generated by the motor when braking will destroy the esc.For this reason, we recommend using a mechanical brake (as with gas powered vehicles) and deactivating the brake in the esc programming.Please note that reversing is then no longer possible!

€2,199.00* €2,487.80* (11.61% saved)
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency