4484/01 FG carbon ballasting hatch wide

€28.50*

Available

Product number: fg_4484_01

EAN: 3410569709134

Product information "4484/01 FG carbon ballasting hatch wide"

Genuine FG spare/option part.
Carbon insert for the attachment of additional weights . Only for the chassis FG 1058.

Content:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

4493/03 FG O-ring for servo saver

Genuine FG spare/option part. Spare part for 4493 and 4494. Thick: 3 mm.Contents:4 pieces

€3.90*

5014 FG RC-plate for 1:5/Truck/Leopard

Genuine FG spare/option part. Plastic radio plate for installation of up to 4 servos. Fits all FG street models (except Formula 1) and Leopard models.You will need FG #6118/05 for installation of any steering servo other than Hitec 805BB.Contents:1 piece

€19.90*

5013 FG Roll cage support left/right

Genuine FG spare/option part. A = 83 mm.Contents:2 pieces

€14.90*

4483/01 FG Alloy-body mount front, adjustable

Genuine FG spare/option part. Suitable for all FG touring cars and GT models. Not for Mercedes C291 and Porsche GT1.Contents:1 set

€34.99*

Details

4493 FG Alloy servo saver 04 complete

Genuine FG spare/option part.This servo saver is an improvement of the 04 version. The servo saver part A is now equipped with a flanged sleeve which prevents the servo saver spring from rubbing against the servo saver shaft.Suitable for all FG models.Contents:1 set

€62.95*

4483 FG CFK-body mount front, adjustable

Genuine FG spare/option part. Suitable for all FG touring cars and GT models. Not for Mercedes C291 and Porsche GT1.Contents:1 set

€46.90*

4478 FG Alloy riser plates for rear axle

Genuine FG spare/option part. The complete rear axle assembly is bolted to the solid alloy riser plates. You can now install this unit with only 4 countersunk screws to the chassis, which makes for a very fast change of the complete end.Replacement for plastic base plate FG 7068.Height 9 mmContent:2 pieces

€44.95*

4493/32 FG Reinforced o-rings for FG servo saver, 3.5 mm

Genuine FG spare/option part. Reinforced o-rings for FG servo savers 4493 and 4494. The stock units have a thickness of 3.5 mm.Contents:4 pieces

€3.30*

4530/07 FG Titanium wishbone turnbuckle M7x64 mm

Genuine FG spare/option part. Corrosion resistant and 40 % less weight compared to steel.Contents:2 pieces

€19.90*

4493/06 FG O-ring for servo saver, 6x13x4 mm

Genuine FG spare/option part.Reinforced o-rings for FG servo savers 4493 and 4494. The stock units have a thickness of 3 mm. The use of these o-rings increases servo saver hardness. For use in combination with metal gear servos only! Dimensions:Inner diameter: 6 mm.Outer diameter: 13 mm.Material thickness: 4 mm.Contents:4 pieces

€4.30*

4494/03 FG Ball bearing 7x14x5 mm

Genuine FG spare/option part. Contents:2 pieces

€3.90*

5010/01 FG Alloy chassis Sportsline short wheelbase 465 mm

Genuine FG spare/option part. Replacement chassis for FG touring car EcoLine/SportsLine models with short wheel base 465 mm.4 mm alu-chassis. Contents:1 piece

€151.99*

Customers also viewed

8010/05 FG Carbon fiber side guards 263mm - 2pcs.

Suitable for Opel Calibra 93 and ITC, Chrysler Viper and Evo chassis.

€61.99*

62140/01 FG Off-Road Buggy WB535 4WD body shell painted

Genuine FG spare/option part. Yellow-orange painted Off-Road Buggy body shell. Suitable for the 2WD and 4WD Off-Road buggies.Contents:1 piece

€175.95*

4478 FG Alloy riser plates for rear axle

€44.95*

y1421 Engine quick mount for G320 Zenoah in FG 1/5 scale

y1421 Versiown: y1421/01 for all Zenoah and Chung Yang engines up to 30 cm³

Genuine HT spare/option part. The engine quick mount replaces the standard clutch housing. It allows a much faster installation or removal of the engine since the clutch side of the engine is only be clamped by one single screw. The gear plate remains in the vehicle, the motor flange on the engine.The engine quick mount fits all FG 2WD on-road cars with horizontal engine (except Formula 1) Sportsline, Competition and Evo (EVO model range till 2003, except Evo 2020 series).We are sorry, but due to the design the quick mount cannot be used for FG 1/6 off-road and monster cars.For the first time it is now possible to install the Zenoah G320 in these cars! For cars allready equipped with a FG quick mount only the engine flange y1423/02 is required.The quick mount is available in two versions:y1421/01 for all Zenoah and Chung Yang engines up to 30 cm³ with standard bolt pattern 50 x 36 mmy1421/02 for Zenoah G320When mounting the motor flange the bolts/nuts must be tightened together in small steps. To mount the studs from y1421/01 or the screws from y1421/02 the use of thread locking compound (link) is required.Please note: y1421/01 does not fit in combination with Zenoah OEM clutch!

€74.95*

2012-184 Mecatech Carbon Floor for Wet Track

Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€67.00*

Details