Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

69265 FG plastic-wishbone front bottom 2WD/4WD, 530, 2 pcs.

Product information "69265 FG plastic-wishbone front bottom 2WD/4WD, 530, 2 pcs."

Item-No. 69265
plastic-wishbone front bottom 2WD/4WD, 530, 2 pcs.


Original plastic-wishbone, front bottom.

For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008.
or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.
There you will find the right spare parts for your vehicle.






0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

6402/01 FG Exhaust hose
Genuine FG spare/option part. Heavy gauge teflon tube for connection between exhaust manifold and tuned pipe with da inside diameter from 21 mm and a length from 50 mm.You may have to heat the tube with a cigarette lighter for installation.Contents:1 piece

Content: 5 Zentimeter (€270.00* / 100 Zentimeter)

€13.50*

Average rating of 0 out of 5 stars

69225 FG A-arm, rear upper 2WD/4WD, plastic ,530, 2 pcs.
Item N° 69225 A-arm, rear upper 2WD/4WD, plastic, 530, 2 pcs. For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€21.90*

Average rating of 0 out of 5 stars

66287 FG Shock tower front 2WD/4WD
Genuine FG spare/option part. FG Shock tower front 2WD/4WDFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.Contents:1 piece

€9.90*

Average rating of 0 out of 5 stars

7092 FG Spring plate - 2pcs.
Spare part for , , , , and .Retainer diameter: 23 mmAccepts springs with approx. 16 mm inner diameterSlot for 4 mm shock shaft

€6.50*

Average rating of 0 out of 5 stars

8464/01 FG Bowden cable flexible for front disk brake - 1pce.
Cable: 305 mmSheath: 220 mmSpare part for , , , , and .

€18.90*

Customers also viewed

Average rating of 0 out of 5 stars

10032 FG Front upright - 2pcs.

€35.90*

Average rating of 0 out of 5 stars

690000 FG Leopard 3 Competition 4WD
Der neue Allrad-Wettbewerbsbuggy Leo 3 ist mit drei Differenzialen ausgestattet. Diese neue Version ist von den 1/8 Wettbewerbsbuggys inspiriert. Durch die sehr direkte Kraftübertragung wird mehr Leistung generiert. Die Zentralbremse ist im Differential- Bock integriert. Das Modell ist mit einem Chassis aus gefrästem 5 mm T7075-Aluminium, großvolumigen Stoßdämpfern, ein Resonanzschalldämpfer und einer neuen aerodynamischen Karosserie ausgestattet. Der Motor (separat zu erwerben) wird in der Mitte mit einer Neigung zur Optimierung des Schwerpunkts eingebaut. Die Wartung dieses Modells wird durch einen schnellen Ausbau der einzelnen Teile erleichtert. Das Modell wird ohne Motor, Kupplung, Airbox und RC-Anlage geliefert.Abmessungen : Länge : 770mm Breite : 470mm Hohe : 330mm Radstand : 580mm Gewicht : 13.2kgNicht inbegriffen : Motor 26cc, 29cc Kupplung Airbox RC-Anlage

€3,199.95*

Average rating of 0 out of 5 stars

68501 FG 4WD conversion kit for 2WD Marder
Genuine FG spare/option part. Fits FG 2WD Marder.Offer your Marder a new life - it will be out of all recognition! Aggressive in the curves, dead on the line - just everything which guarantees pure driving fun. The well-tried 4WD by FG is now available as conversion kit for your 2WD Marder. You will not realize from the outside that the model is equipped with a fourwheel drive. But you and your rc-car friends will notice it considerably as soon as you start your model and speed up properly.The conversion kit includes all parts necessary to convert your 2WD Marder to a 4WD Buggy. A mounting instruction is enclosed.Please note: the radio plate is designed to accept a 805-sized servo (case length 65 mm). For installation of a Rhino (case length 58 mm) or a similar sized servo you need to order radioplate 68241 separately.Contents:1 set

€399.95*

Average rating of 0 out of 5 stars

69265/06 POM Front lower wishbone right
Original FG Ersatz-/Tuningteil.Inhalt:1 Stück

€49.95*

Average rating of 0 out of 5 stars

Mecatech FW01 Touring car, wheelbase 530 mm, Performance Kit -- Europe- and world champion
Because of the customised and complex production of the Mecatech FW 01, the lead time is currently 14 working days!The Mecatech FW01 is for sure the currently most innovative 1/5 race car designed for the dedicated and technically enthusiastic rc car driver.Everyone is enthusiastic about the perfectly fitting and precise workmanship at the highest level. Only high quality materials are used for the production.Since many years Mecatech is a well-know premium manufacturer of largescale hydraulic brakes or shocks and, as only a few may know, a technology expert for a number of Formula 1 racing teams!The Performance Kit from the FW01 is particularly intended for "racer" and differs from the Chassis Kit model by the Performance Kit. Here the list of parts are not including:DifferentialEngine Clutch, Airbox and tuned pipe systembody shell and tiresElectonic components such as servos, batteries and Remote controlPerformance Kit :engine brace left and rightfront stabilizer bar 2.75 mm titanium ready for installationrear stabilizer bar 1.75 mm titanium ready for installationthe two 80 gram front weightsthe two smaller 80 gram center weightsWith the Performance Kit the vehicle is quasi equipped as used at races!Stock gearing:Clutch pinion / spur gear: 36T / 64TLayshaft pinion / differential: 24T / 73TCurrently the Mecatech FW01 is for sure the benchmark of the 1/5 scale racing scene! In the first year Markus Feldmann won with his FW01 1: 5 Mecatech on one of the world's finest and most demanding race track in Lostallo / SwitzerlandMecatech is multiple German, European and World Champion with the FW01 and as the last result:Markus Feldman wins the European Championship in Tourlaville/France. All top 5 positions went to drivers running a Mecatech FW01. 7 out of 10 finalists cars were Mecatech FW01.Although the fit of the Mecatech FW01 parts makes the assembly of the car a great experience, some of our customers want to use the expertise of our shop and wish their FW01 fully assembled and tuned in by us! The complete assembly of your FW01 by our workshop is possible for an additional charge. Please note that the costs of the full assembly with servos a.s.o. do not include the price of any rc-components. If you do not have a suitable radio system with servos and batteries as well as switch and charger, you have to take an additional EUR 800 to EUR 1,500 for this equipment into account. We will be happy to make you an appropriate offer. We are currently waiting for the latest version of the Mecatech FW01. The following components are not included in the Performance Kit not and can be selected individually through the choice of options: engine, clutch, exhaust and airbox, differential gear, body shell and wheels. Not included are all relevant components for remote control! included in the kit:clutch bellbell pinionshaft and screw for clutch installationdifferential spur gearnot included:differentialbody shellairboxrear wingengineelectronicstiresclutch We are currently waiting for the latest version of the Mecatech FW01.

€2,999.00*

Average rating of 0 out of 5 stars

68500, FG 4WD conversion kit for 2WD monster / stadium cars, set
Fits FG Monster and Stadium carsAre you owner of a Monster Truck or Monster Jeep, or perhaps of a Stadium Hummer? You are not really satisfied with the driving performance of your model, or you just want more driving fun? In this case we recommend to install the new 4WD conversion kit made by FG. The conversion kit includes all parts necessary to convert your 2WD Monster model to a 4WD model (complete front diff included). Assembly instructions are included.Fits the following FG cars:- Monster Truck- Monster Hummer- Monster Jeep- Monster Beetle Pro- Stadium Truck-Stadium Hummer- Stadium Jeep- Stadium Beetle ProPlease note: the radio plate is designed to accept a 805-sized servo (case length 65 mm). For installation of a Rhino (case length 58 mm) or a similar sized servo you need to order radioplate y0532 separately.The exploded view shows a partially assemled kit, therefore you can't see every single part included! The video shows the FG Off-Road Buggy 4WD during a test drive for a presentation in the Cars & Details magazine!The entire chassis is 100% identical to the FG cars Marder 4WD; Beetle 4WD and Monster / Stadium 4WDEnjoy the video!

€374.50*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Theme Development