Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

68252, FG Gilmer belt pulley 12 teeth 4WD, plastic

Product information "68252, FG Gilmer belt pulley 12 teeth 4WD, plastic"

Genuine FG spare/option part.


Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

6050 FG Plastic gear carrier 60 mm
Genuine FG spare/option part. Plastic version, 60 mm diameter. For 48T - 46T spur gears.Also available in aluminum .Content:1 piece

€12.50*

Average rating of 0 out of 5 stars

6052 FG Plastic gearwheel 48 teeth
Genuine FG spare/option part. Stock spur gear for all FG monster cars.Suitable for spur gear carriers: 6050 (plastic) 6439 (aluminum)Dimensions:Diameter: 75 mmWidth: 15.5 mmTooth width: 12 mmModule: m=1,5 Contents:1 piece

€17.90*

Average rating of 0 out of 5 stars

6075 FG Rear upper wishbone pin
Genuine FG spare/option part. Dimensions:Diameter: 6mmLength: 65mmand hardened steel: Contents:2 pieces

€8.95*

Average rating of 0 out of 5 stars

66255, FG Ball bearing 6x15x5, 4 pcs.

€13.90*

Average rating of 0 out of 5 stars

6734/08 FG Washers steel 8,4mm - 15pcs.
Part is delivered in silver or black color from vendor!

€2.60*

Average rating of 0 out of 5 stars

6920/14 FG Countersunk screw with Torx M4x14 mm, 10 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€5.70*

Similar products

Average rating of 0 out of 5 stars

66256, FG Plastic cog belt pulley front 42T. 4WD, 1pce.

€23.90*

Average rating of 0 out of 5 stars

66256/01 FG Plastic gilmer belt pulley front 40T. 4WD
Genuine FG spare/option part. Gilmer belt pulley with 40 teeth for the front axle of FG 4WD models. Improves the propulsion of the front axle through increased rpm.Content:1 piece

€23.90*

Customers also viewed

Average rating of 0 out of 5 stars

68253 FG Idler pulley 16mm, plastic
Genuine FG spare/option part. Contents:1 piece

€4.90*

Average rating of 0 out of 5 stars

AXI00006T1 1/24 SCX24 2021 Ford Bronco 4WD Truck Brushed RTR, Red
Axial® reaches a new peak in 1/24 scale realism with this officially licensed Ford Bronco 4WD that tops the proven SCX24 platform with a highly detailed ABS hard body. Ideal for indoor or outdoor trails, its a must for Ford fans and RC enthusiasts of all ages! Product Details Factory-assembled and ready-to-run, with 3-channel radio, 030 brushed motor, servo, ESC/receiver unit and AA transmitter batteries includedOffcially licensed Ford Bronco ABS hard body with molded door handles, mirrors, roof rails, and a tire mount with spare tireBonus second decal sheet for optional customizationNitto Trail Grappler M/T tires mounted on Factory Ford Wildtrak wheelsWorking lights in front, with molded lenses on all four corners of the body Features Factory-assembled and ready-to-run, with 3-channel radio, 030 brushed motor, servo, ESC/receiver unit and "AA" transmitter batteries included Officially licensed Ford Bronco ABS hard body with molded door handles, mirrors, roof rails, and a tire mount with spare tire Bonus second decal sheet for optional customization Nitto Trail Grappler M/T tires mounted on Factory Ford Wildtrak wheels Working lights in front, with molded lenses on all four corners of the body True full-time 4-wheel drive Durable solid axle front and rear suspension and coilover shocks for optimal handling and crawling performance Worm drive gears in front and rear differentials increase ground clearance Sturdy steel C-channel frame rails with bracing for added strength and proper alignment Durable steel axles provide strength and durability to match tough climbs and rough trails 2-Year limited warranty (see product manual for details) Axial® Scales New Peaks in SCX24 Realism!The first sport utility vehicle developed by Ford Motor Company, the Bronco enjoyed an uninterrupted production run that lasted five generations from 1966 through 1996. After a short absence, it returned to the Ford lineup in 2021 and this new generation has quickly re-established the Bronco as one of the auto industry's premier "go-to" off-road vehicles.Now every auto enthusiast who admires the full-size Bronco can own and drive their own officially licensed, 1/24 scale RC version: the Axial® SCX24 Ford Bronco 4WD RTR.No previous radio control experience is needed because it's easy to drive, fully assembled, and ready-to-run. The truck is built on the proven Axial® SCX24 chassis, so even the most dedicated RC crawling fan will be proud to have it in their lineup. And serious scale modelers will be excited to find that this Ford Bronco not only looks great and performs well, but also brings a whole new level of scale realism to the SCX24 platform.With the SCX24 Ford Bronco, Axial® introduces an exceptionally detailed and extra-durable ABS hard body with molded door handles, mirrors, and roof rails. There's also a mounted spare tire, plus optional second decal sheet for personalizing the finish. Complementing the detail of the scale Ford Bronco body, Axial® includes officially licensed Factory Ford Wildtrak wheels and Nitto Trail Grappler M/T tires.The SCX24 Ford Bronco 4WD makes any spot the perfect setting for RC adventures. If you're stuck at work, go crawling on your desk. A messy room becomes an ideal obstacle course. Test your skills on an indoor "crawl course table" or take your SCX24 Ford Bronco outdoors, where its water-resistant electronics are safe from the elements. You can set up an exciting trail in minutes with a few holes, twigs, and rocks.Whatever course you follow, the SCX24 chassis meets every challenge with full-time 4-wheel drive, a trail-taming 3-link front/4-link rear suspension, and much more. Realistic steel frame rails stand up to hard knocks. Worm gears on the axles increase ground clearance. Steel front and rear axles, front stub axles and steel dogbones let you crawl and climb with confidence. Power is supplied by a Dynamite® 88T 030-size motor and 2S LiPo battery. A 3-channel 2.4GHz radio system is included for precise, dependable control.The Ford Bronco comes complete with everything needed to hit the trails right out of the box transmitter, receiver, ESC, motor, servo, batteries, and USB charger. The authentic scale body is available in three color options based on current Ford Bronco factory colors. Enjoy the view from the peak of 1/24 scale realism with the Axial® SCX24 Ford Bronco 4WD! DETAILED SCALE FORD BRONCO HARD BODYThe Axial® SCX24 Ford Bronco achieves a whole new level of scale realism with its officially licensed, exceptionally detailed, and extra-durable ABS hard body with molded door handles, mirrors, and roof rails. There's also a mounted spare tire, plus optional second decal sheet for personalizing the finish. STEEL C-CHANNEL CHASSIS FRAME RAILSJust like the 1/10 scale SCX10 platform, the SCX24 chassis features rugged and sturdy steel C-channel frame rails with bracing to keep everything intact and aligned. DYNAMITE® BRUSHED MOTORThe included Dynamite® 88T 030-size brushed electric motor provides the right amount of torque for making steep climbs. It's mated to a steel motor mount to keep flex to a minimum and help protect the gears. WORM GEARSThe front and rear differentials each house a worm screw and worm gear setup to get the power to the axles and create higher ground clearance. FRONT AND REAR SOLID AXLE HOUSINGSThe front and rear axles consist of a two piece, molded composite solid axle design. For optimal handling, the SCX24 suspension features a three-link front and four-link rear setup. DURABLE STEEL AXLESSteel front and rear axles, front stub axles and steel dogbones provide strength and durability needed to keep running with confidence during tough climbs and over rough trails. SPLINED DRIVE SHAFTSThe front and rear drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels. COILOVER SHOCK ABSORBERSEven at this small scale, the combination of coilover shocks with simulated reservoirs and durable composite suspension links delivers the crawling performance you expect from an Axial® vehicle.. LIGHTS AND MOLDED LENSESFor maximum realism, working lights are included on the front corners of the scale Ford Bronco body and in the front bumper. All four corners of the body feature molded lenses. 4-LINK REAR SUSPENSIONThe rear suspension geometry uses a 4-link design which is optimized to reduce axle steer and torque twist. FACTORY FORD WILDTRAK WHEELS & NITTO TRAIL GRAPPLER M/T TIRESComplementing the exceptional detail of the scale hard body, Axial® has outfitted the SCX24 Ford Bronco with officially licensed Wildtrak wheels and Nitto Trail Grappler M/T tires. They offer a fantastic blend of off-road performance while retaining excellent composure for on-road use. HINGED BODY SYSTEMThe hinged body system provides easy access to on-board components. Its hook-and-loop hinge design lets you reach the chassis and battery quickly by simply swinging the body up. FULL BALL BEARINGSJust because the SCX24 is small doesn't mean its features follow suit. There are no bushings here the drivetrain spins freely on sealed cartridge bearings throughout the entire vehicle. AXIAL® AS-1 SERVOMounted just above the front axle is the Axial® AS-1 servo, with a servo saver that allows for steering accuracy while protecting the servo gears in the event of a bind or impact.

€179.99*

Average rating of 0 out of 5 stars

7332 FG Silencer gasket for CY / Zenoah / Fuelie / PT
Genuine FG spare/option part.For all Zenoah / CY / Fuelie / PT engines.Applications:Click here!Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContents:2 pieces

€4.90*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Plugin Development