500500102 Carson Reflex Wheel Start 2.4G Radio black
Product information "500500102 Carson Reflex Wheel Start 2.4G Radio black"
The Reflex Wheel Start is a 2.4GHz radio that can be continuously divided into two fully proportional channels. It has a trim function for throttle and steering as well as a servo reverse, which allows the direction of rotation to be reversed. You can also program a travel limit for the servos for both channels using the dual rate function.
For safety, the Funke is also equipped with a failsafe function. The battery status of the device can be easily read from the LED display. The Reflex Wheel can be combined with other color variants and is perfect for beginners.
3-channel 2.4 GHz transmitter, 3-channel mini receiver, instructions
For safety, the Funke is also equipped with a failsafe function. The battery status of the device can be easily read from the LED display. The Reflex Wheel can be combined with other color variants and is perfect for beginners.
Scope of delivery:
3-channel 2.4 GHz transmitter, 3-channel mini receiver, instructions
Technical details:
- Two continuously adjustable, fully proportional channels
- Servo reverse (reversal of running direction) and trim function
- Trim function for throttle and steering
- Dual rate for both channels (travel limitation of the servos)
- Battery status display using LED
- Failsafe
Technical data:
- Operating voltage transmitter 4.8 to 6 V
- Receiver power supply (without BEC) possible up to 11 V
- Uni plug system Futaba/Graupner-J/R
Login
Customers also bought
Suitable for all FG/Carson/Smartech cars except FG Evo and Carson 4WD.Please note that tank mount 7143 is required for installation. Installation in a Carson/Smartech 1/6 off-road car requires drilling of two new 4.5 mm diameter holes into the chassis plate. Drilling template is included.Comes as shown with fuel lines, grommet and gas cap included.
Genuine FG spare/option part. Splash-proofed receiver box for all merchantable small receivers, suitable for all car models 1:12 - 1:5.Dimensions:Length: upper section 92 mm, bottom 69 mmHeight: 48 mmWidth: 38 mmContents:1 piece
Item N° 6465 FG air filter for 1:6 Off-Road models complete - setYou will need the adapter plate 6451/03 for installation.
Item N° 6451/03 Air filter adapter for Zenoah and CY, 1pce.These air filter adapters are needed fpr mounting the FG air and inlet silencers 6464, 6465 and the K+N air filters 6442 and 6460 as well as 9462 and 6466 on Solo, Zenoah and Tech engines.Fits: Zenoah G230/G240/G260/G270/G290 and CY 23/26 cm³ engines.
Similar products
The Reflex Wheel Pro III is the perfect choice for sport-level car, truck and boat drivers. Everything you need to bash around your backyard or local track. Proven performance, reliability and range from the Spektrum brand make the Reflex Wheel Pro III great for someone looking to get involved in RC surface or a great grab-and-go transmitter for the expert. Key FeaturesPerfect for sport level cars and boatsErgonomic gripServo reversingProven reliability from the Spektrum brandReflex Wheel Pro III 3-channel receiver includedInterchangeable grips (Medium grip included. Other grip sizes sold separately in Optional Accessories)Travel adjustProduct SpecificationsNumber of Channels: 2Modulation: DSMRBand: 2.4GHzReceiver: Reflex Wheel Pro III Receiver Battery Type: AAThis set contains:Reflex Wheel Pro IIIy1570 Servo 54kg-cm/0,11 s/6 Volt till 8,4 volt y2009 Top Tuning Digital pro Servo 20 kgy0425 Y-harness, universal connectorLOSB 9642 Global AC 6V Charger 2000 mAh 6V Battery with universal connectorWhen used in a FG 2WD car, adaptor plate 6118/02 is required for steering servo installation.
Optimal supplementary set for ARR and kit models. Especially for cars and boats.Transmitter / receiver Operating voltage transmitter 4.8 to 6 V two continuously adjustable, fully proportional channels Servo reverse for both channels (reversal of running direction) Trim function for throttle and steering Dual rate for both channels (travel limitation of the servos) Receiver power supply (without BEC) possible up to 11 V Integrated fail-safe Uni plug system for Futaba and Graupner-J/R Charging socket (positive pole inside) Battery status display using LED Charger Input voltage: 100-240V, 50/60 Hz (AC) Charging current output 1: max. 2 A / 9 V Charging current output 2: max. 0.5 A / 6 V Battery types: NiMH Control servo JR plug 6 kg actuating force Metal gears Drive battery NiMH 7.2 V / 3000 mAh TAMIYA plug Transmitter battery NiMH Mignon 1.2 V / 2100 mAh 2-channel 2.4 GHz transmitter, 4-channel mini receiver, Expert Charger Carand Radio, 7.2V/3000mAh driving battery, CS-6 steering servo, 4x 2100 mAh Mignon transmitter batteries and instructions.
Genuine Carson spare/option part. The Reflex Wheel Pro III is the innovative 2-channel entry-level RC system from Carson-Model Sport. The steering angle and the servo travel on the throttle are adjustable (Dual Rate). This allows each model to be controlled very precisely and tuned to the road. In addition, the throttle can be limited for beginners and children. The chrome steering wheel with cellular rubber surface allows precise control and can be tilted individually forwards and backwards. The automatic stop function (low-voltage protection) integrated in the receiver is the life guard for your combustion engine model. This remote control system is ideal for all areas of RC-Car sport.Absolutely ingenious yet simple is the binding procedure:1. Switch the receiver on2. Press the setup key3. Switch on the transmitter - READY!Technical details: Operating voltage transmitter 4.8 to 6 V Operation possible with Li-Ion battery or 4x AA NiMh cells 2.4 GHz FHSS system (frequency hopping spread spectrum) Two infinitely variable, fully proportional channels Servo reverse for both channels (reverse direction) Trim function for throttle and steering Dual Rate for both channels (servo travel limit) Power supply of the BEC receiver from a battery with 4.8 - 7.2V possible Integrated fail-safe (programmable) Uni connector system for Futaba and Graupner-JR Charging socket (positive center pole) Battery status indication by means of LEDContents:1 x 2-channel transmitter 2.4 GHzBEC Mini receiver
Customers also viewed
Genuine Carson spare/option part. The Reflex Wheel Pro III is the innovative 2-channel entry-level RC system from Carson-Model Sport. The steering angle and the servo travel on the throttle are adjustable (Dual Rate). This allows each model to be controlled very precisely and tuned to the road. In addition, the throttle can be limited for beginners and children. The chrome steering wheel with cellular rubber surface allows precise control and can be tilted individually forwards and backwards. The automatic stop function (low-voltage protection) integrated in the receiver is the life guard for your combustion engine model. This remote control system is ideal for all areas of RC-Car sport.Absolutely ingenious yet simple is the binding procedure:1. Switch the receiver on2. Press the setup key3. Switch on the transmitter - READY!Technical details: Operating voltage transmitter 4.8 to 6 V Operation possible with Li-Ion battery or 4x AA NiMh cells 2.4 GHz FHSS system (frequency hopping spread spectrum) Two infinitely variable, fully proportional channels Servo reverse for both channels (reverse direction) Trim function for throttle and steering Dual Rate for both channels (servo travel limit) Power supply of the BEC receiver from a battery with 4.8 - 7.2V possible Integrated fail-safe (programmable) Uni connector system for Futaba and Graupner-JR Charging socket (positive center pole) Battery status indication by means of LEDContents:1 x 2-channel transmitter 2.4 GHzBEC Mini receiver
Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.
