Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

500707152 Carson RC-Reflex Pro 3 Electric Set

Product information "500707152 Carson RC-Reflex Pro 3 Electric Set "

Optimal supplementary set for ARR and kit models. Especially for cars and boats.

Transmitter / receiver

  • Operating voltage transmitter 4.8 to 6 V
  • two continuously adjustable, fully proportional channels
  • Servo reverse for both channels (reversal of running direction)
  • Trim function for throttle and steering
  • Dual rate for both channels (travel limitation of the servos)
  • Receiver power supply (without BEC) possible up to 11 V
  • Integrated fail-safe
  • Uni plug system for Futaba and Graupner-J/R
  • Charging socket (positive pole inside)
  • Battery status display using LED

Charger

  • Input voltage: 100-240V, 50/60 Hz (AC)
  • Charging current output 1: max. 2 A / 9 V
  • Charging current output 2: max. 0.5 A / 6 V
  • Battery types: NiMH

Control servo

  • JR plug
  • 6 kg actuating force
  • Metal gears

Drive battery

  • NiMH 7.2 V / 3000 mAh TAMIYA plug

Transmitter battery

  • NiMH Mignon 1.2 V / 2100 mAh


2-channel 2.4 GHz transmitter, 4-channel mini receiver, Expert Charger Carand Radio, 7.2V/3000mAh driving battery, CS-6 steering servo, 4x 2100 mAh Mignon transmitter batteries and instructions.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Similar products

Average rating of 0 out of 5 stars

y0688 HT RTR set with 2.4 GHz remote control for all FG and Carson 1:6 scale models
The Reflex Wheel Pro III is the perfect choice for sport-level car, truck and boat drivers. Everything you need to bash around your backyard or local track. Proven performance, reliability and range from the Spektrum brand make the Reflex Wheel Pro III great for someone looking to get involved in RC surface or a great grab-and-go transmitter for the expert. Key FeaturesPerfect for sport level cars and boatsErgonomic gripServo reversingProven reliability from the Spektrum brandReflex Wheel Pro III 3-channel receiver includedInterchangeable grips (Medium grip included. Other grip sizes sold separately in Optional Accessories)Travel adjustProduct SpecificationsNumber of Channels: 2Modulation: DSMRBand: 2.4GHzReceiver: Reflex Wheel Pro III Receiver Battery Type: AAThis set contains:Reflex Wheel Pro IIIy1570 Servo 54kg-cm/0,11 s/6 Volt till 8,4 volt y2009 Top Tuning Digital pro Servo 20 kgy0425 Y-harness, universal connectorLOSB 9642 Global AC 6V Charger 2000 mAh 6V Battery with universal connectorWhen used in a FG 2WD car, adaptor plate 6118/02 is required for steering servo installation.

€180.10*

Average rating of 0 out of 5 stars

500500053 Carson Reflex Wheel Pro III 2.4 GHz BEC
Genuine Carson spare/option part. The Reflex Wheel Pro III is the innovative 2-channel entry-level RC system from Carson-Model Sport. The steering angle and the servo travel on the throttle are adjustable (Dual Rate). This allows each model to be controlled very precisely and tuned to the road. In addition, the throttle can be limited for beginners and children. The chrome steering wheel with cellular rubber surface allows precise control and can be tilted individually forwards and backwards. The automatic stop function (low-voltage protection) integrated in the receiver is the life guard for your combustion engine model. This remote control system is ideal for all areas of RC-Car sport.Absolutely ingenious yet simple is the binding procedure:1. Switch the receiver on2. Press the setup key3. Switch on the transmitter - READY!Technical details: Operating voltage transmitter 4.8 to 6 V Operation possible with Li-Ion battery or 4x AA NiMh cells 2.4 GHz FHSS system (frequency hopping spread spectrum) Two infinitely variable, fully proportional channels Servo reverse for both channels (reverse direction) Trim function for throttle and steering Dual Rate for both channels (servo travel limit) Power supply of the BEC receiver from a battery with 4.8 - 7.2V possible Integrated fail-safe (programmable) Uni connector system for Futaba and Graupner-JR Charging socket (positive center pole) Battery status indication by means of LEDContents:1 x 2-channel transmitter 2.4 GHzBEC Mini receiver

€64.99*

Customers also viewed

Average rating of 0 out of 5 stars

y0688 HT RTR set with 2.4 GHz remote control for all FG and Carson 1:6 scale models
The Reflex Wheel Pro III is the perfect choice for sport-level car, truck and boat drivers. Everything you need to bash around your backyard or local track. Proven performance, reliability and range from the Spektrum brand make the Reflex Wheel Pro III great for someone looking to get involved in RC surface or a great grab-and-go transmitter for the expert. Key FeaturesPerfect for sport level cars and boatsErgonomic gripServo reversingProven reliability from the Spektrum brandReflex Wheel Pro III 3-channel receiver includedInterchangeable grips (Medium grip included. Other grip sizes sold separately in Optional Accessories)Travel adjustProduct SpecificationsNumber of Channels: 2Modulation: DSMRBand: 2.4GHzReceiver: Reflex Wheel Pro III Receiver Battery Type: AAThis set contains:Reflex Wheel Pro IIIy1570 Servo 54kg-cm/0,11 s/6 Volt till 8,4 volt y2009 Top Tuning Digital pro Servo 20 kgy0425 Y-harness, universal connectorLOSB 9642 Global AC 6V Charger 2000 mAh 6V Battery with universal connectorWhen used in a FG 2WD car, adaptor plate 6118/02 is required for steering servo installation.

€180.10*

Average rating of 0 out of 5 stars

2PCKA-AM40 Futaba Megatech Radio control with Servo
Genuine Futaba replacement / option part.Handy pistol-grip system with interference-insensitive FM modulation, ideal for controlling RC cars, especially for 1:5 models that have a gasoline engine with electric or magnetic ignition.The non-slip, rubber-coated knob allows steering movements like in the original car.The turning distance, the middle position and end points of the steering and throttle servo are adjustable. Conveniently positioned controls allow trim and travel to be adjusted on the transmitter even while driving.The pistol trigger allows fast acceleration and sensitive braking. The center position can be selected in a ratio of 7:3 or 5:5 to optimally adjust the trigger for combustion and electric cars. A 3-stage LED display system provides precise information about the current operating voltage of the transmitter at all times.Plug-in crystals that can be easily changed from the outside and a servo reverse function for reversing the servo direction are of course part of the basic equipment of such a system.All switches and controls which are not used during driving are protected under a smoked glass cover on the front of the transmitter.A built-in charging socket allows easy conversion to rechargeable NC battery operation.Functions: ATV steering Servo travel setting separately for throttle and steeringVariable Rate Control travel reduction for steering Neutral trim for steering and throttle Content: Transmitter Megatech Receiver R-122 JE 40 MHz Servo S3003 Battery box - BEC Switch cable with charging battery box BEC Servo accessories

€99.90*

Average rating of 0 out of 5 stars

Mecatech FW01 Touring car, wheelbase 530 mm Chassis Kit -- Europe- and world champion
The Mecatech FW01 is for sure the currently most innovative 1/5 race car designed for the dedicated and technically enthusiastic rc car driver.Everyone is enthusiastic about the perfectly fitting and precise workmanship at the highest level. Only high quality materials are used for the production.Since many years Mecatech is a well-know premium manufacturer of largescale hydraulic brakes or shocks and, as only a few may know, a technology expert for a number of Formula 1 racing teams!The Chassis Kit of the FW01 is particulary intended for "switchers" and "newcomers" and differs from the Basic kit in that the brakes and shock absorbers are already included in the Chassis Kit. Here is a list of the parts that are required for completion:brakes and shocks (Difference to Chassis Kit)DifferentialEngine Clutch, Airbox and tuned pipe systembody shell and tiresElectonic components such as servos, batteries and Remote controlStock gearing:Clutch pinion / spur gear: 36T / 64TLayshaft pinion / differential: 24T / 73T Currently the Mecatech FW01 is for sure the benchmark of the 1/5 scale racing scene! In the first year Markus Feldmann won with his FW01 1: 5 Mecatech on one of the world's finest and most demanding race track in Lostallo / SwitzerlandMecatech is multiple German, European and World Champion with the FW01 and as the last result:Markus Feldman wins the European Championship in Tourlaville/France. All top 5 positions went to drivers running a Mecatech FW01. 7 out of 10 finalists cars were Mecatech FW01.Although the fit of the Mecatech FW01 parts makes the assembly of the car a great experience, some of our customers want to use the expertise of our shop and wish their FW01 fully assembled and tuned in by us!The complete assembly of your FW01 by our workshop is possible for an additional charge. Please note that the costs of the full assembly with servos a.s.o. do not include the price of any rc-components. If you do not have a suitable radio system with servos and batteries as well as switch and charger, you have to take an additional EUR 800 to EUR 1,500 for this equipment into account. We will be happy to make you an appropriate offer.We are currently waiting for the latest version of the Mecatech FW01.The following components are not included in the basic kit not and can be selected individually through the choice of options: brakes, shocks, engine, clutch, exhaust and airbox, differential gear, body shell and wheels. Not included are all relevant components for remote control!We are currently waiting for the latest version of the Mecatech FW01.Included in the chassis kit:- All pinions- clutch bell- Coupling fixation- All parts and screws for mounting the enginenot included:- differential- Engine and linkage- body shell and spoilers- Airbox- clutch - engine- Electronics- Tires

€2,670.00*
%

Average rating of 0 out of 5 stars

Futaba transmitter case
Description :Practical plastic transmitter case with zip fastener. Ideal for safe transport of the remote control transmitter and for protected storage at home. The inside of the case is padded with foam. The transmitter is additionally secured against slipping by a strap in the case. The outside of the case features white logo prints. The protective bag for the transmitter and the shoulder strap complete the scope of delivery. Thanks to the variable compartment dividers with Velcro fastener, the case fits both desk transmitters (FX32 / FX36) and handheld transmitters (T18SZ / T32MZ) or car transmitters (T7PX / T10PX). Technical data External dimensions: 390 x 275 x 200 mm Internal dimensions: 375 x 250 x 160 mm  Features Plastic transmitter case Hinged lid with zip fastener Inner part padded with foam Suitable for all FUTABA transmitters Separate protective bag Hanging strap Scope of delivery Plastic transmitter case Separate protective bag Hanging strap Translated with DeepL.com (free version)

€99.90* €184.00* (45.71% saved)

Average rating of 0 out of 5 stars

7573 FG Radio controll 2,4 GHz FG-RS3 incl. receiver
Genuine FG spare/option part. Wheel / trigger type transmitter with ergonomic designRubber coated non-slip wheelLarge LCD display for easy settings10 model memoriesFHSS ModulationFailsafeDual rate on channels 1, 2 and 3Trims on the 3 channelsLow voltage (9,5V)7573/01 FG receiver 2,4 GHz fpr FG-RS3Contents:1 piece

€75.90*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency