Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

500500053 Carson Reflex Wheel Pro III 2.4 GHz BEC

Product information "500500053 Carson Reflex Wheel Pro III 2.4 GHz BEC"

Genuine Carson spare/option part.

The Reflex Wheel Pro III is the innovative 2-channel entry-level RC system from Carson-Model Sport. The steering angle and the servo travel on the throttle are adjustable (Dual Rate). This allows each model to be controlled very precisely and tuned to the road. In addition, the throttle can be limited for beginners and children. The chrome steering wheel with cellular rubber surface allows precise control and can be tilted individually forwards and backwards. The automatic stop function (low-voltage protection) integrated in the receiver is the life guard for your combustion engine model. This remote control system is ideal for all areas of RC-Car sport.

Absolutely ingenious yet simple is the binding procedure:
1. Switch the receiver on
2. Press the setup key
3. Switch on the transmitter - READY!


Technical details:
Operating voltage transmitter 4.8 to 6 V
Operation possible with Li-Ion battery or 4x AA NiMh cells
2.4 GHz FHSS system (frequency hopping spread spectrum)
Two infinitely variable, fully proportional channels
Servo reverse for both channels (reverse direction)
Trim function for throttle and steering
Dual Rate for both channels (servo travel limit)
Power supply of the BEC receiver from a battery with 4.8 - 7.2V possible
Integrated fail-safe (programmable)
Uni connector system for Futaba and Graupner-JR
Charging socket (positive center pole)
Battery status indication by means of LED

Contents:
  • 1 x 2-channel transmitter 2.4 GHz
  • BEC Mini receiver

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also viewed

Average rating of 0 out of 5 stars

7573 FG Radio controll 2,4 GHz FG-RS3 incl. receiver
Genuine FG spare/option part. Wheel / trigger type transmitter with ergonomic designRubber coated non-slip wheelLarge LCD display for easy settings10 model memoriesFHSS ModulationFailsafeDual rate on channels 1, 2 and 3Trims on the 3 channelsLow voltage (9,5V)7573/01 FG receiver 2,4 GHz fpr FG-RS3Contents:1 piece

€72.50*

Average rating of 0 out of 5 stars

6000E FG Marder E 2WD with brushless engine and brushless ESC 150A RTR
Genuine FG spare/option part.The electric powered version of the legendary Marder buggy is equipped with a powerful 1400kV  brushless motor. Power supply: 2x2S Li-Po battery pack. In its entry level version 4S, the running time is about 15 minutes with lightning-accelerations and a top speed superior to the gas powered Marder one. In the 2x3S configuration, the E-Marder is a true rocket ship! Incl. RTR equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Empfänger: Mini BECy1570 CYS S0650 Largescale servo, 55 kg/0,11 secTx-batterys 4 pieces y0660/04 In the first place our 1:6 Off-Road Buggy stands for driving fun. Through the knobbed tires or with Slick tires (optional extras) the model can be driven cross-country, on a car park, simply just everywhere.The RTR version of the car includes servo, transmitter, receiver, transmitter / receiver and rechargeable batteries. 2WD Off Road BuggyMachined 4 mm aluminum chassis plate with side guardsIndependent suspension with many options for adjustmentRoll cage, can be used as a carrying handle as wellClosed factory painted body shell with decals already appliedFlange rims with knobby tires1400 kV motor150A brushless ESCTwo locations for the batteries with hook-and-loop strapsDimensions:Length: 620 mmWidth: 420 mmHeight: 260 mmWheelbase: 470 mmWeight: 6,4 kgContents:1 piece

€819.95*
%

Average rating of 0 out of 5 stars

6544/01 FG Charging cable EC8 with gold contacts
Genuine FG spare/option part.Contents:1 piece

€12.90* €13.90* (7.19% saved)

Average rating of 0 out of 5 stars

y0688 HT RTR set with 2.4 GHz remote control for all FG and Carson 1:6 scale models
The Reflex Wheel Pro III is the perfect choice for sport-level car, truck and boat drivers. Everything you need to bash around your backyard or local track. Proven performance, reliability and range from the Spektrum brand make the Reflex Wheel Pro III great for someone looking to get involved in RC surface or a great grab-and-go transmitter for the expert. Key FeaturesPerfect for sport level cars and boatsErgonomic gripServo reversingProven reliability from the Spektrum brandReflex Wheel Pro III 3-channel receiver includedInterchangeable grips (Medium grip included. Other grip sizes sold separately in Optional Accessories)Travel adjustProduct SpecificationsNumber of Channels: 2Modulation: DSMRBand: 2.4GHzReceiver: Reflex Wheel Pro III Receiver Battery Type: AAThis set contains:Reflex Wheel Pro IIIy1570 Servo 54kg-cm/0,11 s/6 Volt till 8,4 volt y2009 Top Tuning Digital pro Servo 20 kgy0425 Y-harness, universal connectorLOSB 9642 Global AC 6V Charger 2000 mAh 6V Battery with universal connectorWhen used in a FG 2WD car, adaptor plate 6118/02 is required for steering servo installation.

€180.10*

Average rating of 0 out of 5 stars

Servo direct power supply cable with electronic switch, 1 pce.
servo_strom_mit Application: y0371 - 3 servos, battery connector FG+ 5EUR
Servo direct power supply cable with electronic switch, 1 pce.With this cable the servos get their current directly from the battery without straining the receiver circuit board.The integrated electronic receiver switch is rated 5 A continuous / 15 A peak. This switch does not use mechanical contacts for the load; therefore it is less prone to failure caused by vibrations or dirt. With separate charging connector.With drilling template and mounting material included.

Variants from €54.90*
€59.90*
%

Average rating of 0 out of 5 stars

LOSB0886 Losi S901T Top Gas / Throttle Servo
losb_losb0886 Alloy servoarm: y0711 Double sided split alloy servoarm+ 14.9EUR
Product Specifications: Type: Digital Torque: 416.6 oz-in (30 kg-cm) @ 4.8V; 514.5 oz-in (37 kg-cm) @ 6V Speed: 0.19 sec/60 deg @ 4.8V; 0.14 sec/60 deg @ 6V Bushing Or Bearing: Bearing Bearing: Dual Connector Type: JR Gear Type: Metal Voltage: 4.8V to 6.0V Dimensions: Length: 2.59 in (65.8 mm) Width: 1.18 in (30.0 mm) Height: 2.26 in (57.4 mm) Weight: 5.40 oz (153.1 mm) Contents: Servo Single-sided servoarm 52mm 4 sided servoarm 60mm Servo disk 40mm diameter Mounting screws Rubber grommets Guide sleeves

Variants from €59.99*
€64.99* €129.99* (50% saved)

Average rating of 0 out of 5 stars

P-CB10PX Futaba T10PX 2.4GHz with R404SBS receiver
The T10PXR is a 10-channel 2.4GHz computer radio control system with F-4G,T-FHSS SR / T-FHSS / S-FHSS and MiniZ modulation modes. The transmitter convinces with new design, new keypad and high quality carbon elements. New additions are some new buttons, 2- and 3-position switches and a rocker switch at the base of the transmitter.The Futaba T10PX comes with many new features that make the new RC-car radio flagship a very flexible transmitter.With 10 channels and many configuration options, the possible uses go far beyond those of a conventional car radio.From racer and drifter to crawler and boat to complex function models, everything is possible.Overview of the modulation types: F-4G, 10 channels / telemetry T-FHSS-SR, 4 channels T-FHSS, 4 channels / telemetry li> S-FHSS, 7 channels The new F-4G transmission protocol has been further improved compared to T-FHSS SR. Latency has been significantly reduced again and the range extended. At the same time, the receivers have become smaller.The optical center of the T10PX is the backlit 4.3 inch TFT color touch display with brilliant colors and high sharpness. Even in direct sunlight, all values on the display can be read excellently. The graphic user interface with the well-known easy to use Futaba menu structure, ensures easy operation. Navigation is intuitive via the screen and the additional buttons on the top of the transmitter.TELEMETRYSynchronized, bi-directional communication between transmitter and receiver with high telemetry data rate (up to 9 times per second), without loss of control channel response. Maximum of 31 telemetry sensors, alarm tone setting and output via beeper, vibration alert or voice output via internal speaker or optional headphones/active speaker. Telemetry data recording on SD card (SDHC) Telemetry data analysis via spreadsheet programs or LogView software Real-time display of telemetry data on integrated display Receiver signal strength indicator for monitoring the range Receiver undervoltage warning system for monitoring of the receiver battery Connection of up to 31 sensors to the S.BUS2 input S.BUS-TECHNOLOGY Connection option for S.BUS2 sensors All S.BUS servos can also be connected to normal servo outputs of the receiver Digital BUS technology for model sports Allows ideal placement of all components with efficient wire routing Future-proof, digital technology for all future Futaba components Features: Color LCD Touch Screen 4.3 Inch F4G System & Telemetry S-FHSS & T-FHSS Super Response (SR) Mode MiniZ S-FHSS 10 channels 40 models memory additional 3- and 2-step switches Brake mixer for large scale cars 4-wheel steering mixer Dual ESC mixer Mixer for track drives CPS LED mixer Gyro adjustment via T10PX microSD Slot (Data Log / Update) USB port Content of delivery Transmitter T10PX Receiver 404SBS Instruction manual DE/UK Accessories

€729.00*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Theme Development