Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

y2004 Tuning aluminum rear suspension set for nearly all FG 4WD Sportsline cars

Product information "y2004 Tuning aluminum rear suspension set for nearly all FG 4WD Sportsline cars"

Tuning aluminum rear suspension set for nearly all FG 4WD Sportsline cars: Monster-Truck, Off-Road Buggy, Marder, Beetle, Tourenwagen.
Does not fit Formula 1, Leopard and Truggy!

Assembled units in the pictures are completed with some parts which are not included. These parts will be re-used from the stock suspension when swapping in the aluminum version. You will also need two bags of 6100/04 Turnbuckle left/right M8/40mm.

y2004/01 fits:
FG 4WD Monster-Truck models and Monster Beetle models, Off-Road, Marder, Beetle, Porsche GT3 RSR and Race Trucks. The only difference between the sets is the length of the lower a-arms (y2004/01 = long, y2004/02 = short). The picture of the assembled set is used for both versions and shows the shorter arms.
Part number:Name:
y2001Aluminum rear upper a-arms
y68401Aluminum rear lower a-arms long
66213Aluminum rear shock tower
y66205/06Aluminum rear diff mounts


y2004/02 fits:
FG 4WD Touring car models (except Porsche GT3 RSR).
Part number:Name:
y2001Aluminum rear upper a-arms
y68401/01Aluminum rear lower a-arms short
66213Aluminum rear shock tower
y66205/06Aluminum rear diff mounts


y2004/03 fits:
FG 4WD/2WD Off-Road WB535.
Part number:Name:
y2001Aluminum rear upper a-arms
y68401Aluminum rear lower a-arms long
66213/02Aluminum rear shock tower
y66205/06Aluminium rear diff mounts


018ddb439dec733c98d05c2856e70396.jpg

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

y2001 Alloy a-arm, rear upper FG 2WD/4WD/Leopard 2WD
Genuine HT spare/option part.Alloy a-arm rear upper for FG 2WD/4WD models. Replacement for FG item No.: 66225.Contents:1 piece

€19.90*

Average rating of 0 out of 5 stars

y68401 Rear lower alloy wishbones 2+4WD, set
Set contents rear lower wishbones, alloy ball-and- socket joints, hardened wishbone pins, small parts, screws.Suitable for Off-Road Buggy 2+4WD RTR, Off-Road Beetle 2+4WD RTR and Monster/ Stadium models 2+4WD RTR, 2+4WD Porsche.

€199.90*

Average rating of 0 out of 5 stars

y68401/01 Rear lower alloy wishbones small, set
Rear lower alloy wishbones salon cars, setSet contents small rear lower wishbones, alloy ball-and- socket joints, hardened wishbone pins, small parts, screws.Suitable for 4WD Mini Cooper and for FG 2WD Touringcar like the Sportsline or the Ecoline too. Or suitable for all 1:5 models with a width up to 400mm.

€199.90*

Average rating of 0 out of 5 stars

y6479 HT rear alloy upright
Genuine HT spare/option part.Alloy upright for a ball fastening at the upper wishbone. Adjustable at the lower wishbone (hinge pin), too. Fits the rear axle of all FG and Carson / Smartech 1/6 scale cars.Comes with adjustment clips and grub screws for the hinge pins included.Dimensions:Bearing seats: 22 x 7 mmHinge pin bore: 6 mmDistance wheel shaft/hinge pin: 25 mm Contents:2 pieces

€89.90*

Average rating of 0 out of 5 stars

y68400 Alloy damper plate/ alloy rear axle mounts 2WD/4WD, set
The set includes right and left rear axle mounts, damper plate and screws.Suitable for Off-Road Buggy 2WD/4WD RTR, Off-Road Beetle 4WD RTR and Monster/ Stadium models 4WD RTR, for all 2WD/4WD On-Road models. For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.https://rc-car-online.de/en-ersatzteile_main,15.html

€179.90*

Average rating of 0 out of 5 stars

6100/04 FG Turnbuckle left/right M8/40mm
Genuine FG spare/option part.steel version, 40 mm. Fits all FG except Formula 1.Contents:2 pieces

€10.95*

Similar products

Average rating of 0 out of 5 stars

y1218 Springs for drive shafts
Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece

€4.90*

Average rating of 0 out of 5 stars

y1004 Driveshaft boots for ball drive + dogbones
Genuine HT spare/option part. Protect ball drive as well as cardan drive against dirt. For FG and Carson ball drives, fits standard dogbones as well.Contents:2 pieces

€8.90*

Average rating of 0 out of 5 stars

y6107/01 Wheel squares 18 mm HART-COAT, 14 mm wide
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)14 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 14 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€17.45*

Average rating of 0 out of 5 stars

y6107/02 Wheel squares 18 mm HART-COAT, 17 mm wide
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)17 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 17 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€18.95*

Average rating of 0 out of 5 stars

y0897 Wheelie bar with suspension for 2WD + 4WD models - 1pce.
Wheelie bar with double ball raced wheel, cnc-machined from high strength alloy. The arm has a rubber suspension unit, the height is infinitely adjustable. The suspension allows for a maximum deflection of 30 degrees and is dirt- and mud-proof. The wheel bearings are sealed.The unit fits FG Monster Truck, Monster Beetle and Marder BigFoot, except for Monster Buggy Off-Road WB535 4WD. Installation on other models will be possible, but requires modifications to the chassis, mainly to accept the bolt pattern. The Carson Attack already has the correct pattern.

€89.90*

Average rating of 0 out of 5 stars

y0324 Off-Road tuning spring Dirt-Spring M0
federn_dirt_m0 Version: y0324/05 - M05, blue
Genuine HT spare/option part. Progressive tuning springs, will fit the standard red and the thick silver shocks on FG offroad cars. All springs have an inner diameter of 21 mm.Available in several versions.For the front on FG buggies:y0324/01 - M01, 2,1 x 60 mm, yellowy0324/02 - M02, 2,2 x 60 mm, orangey0324/03 - M03, 2,3 x 60 mm, redy0324/04 - M04, 2,4 x 60 mm, purpley0324/05 - M05, 2,5 x 60 mm, blueContent:2 pieces

€17.90*

Average rating of 0 out of 5 stars

67577 FG Drive shaft 134 mm
Genuine FG spare/option part. Please note: If you own a Leopard 2WD with the old 130.5 mm driveshafts (same part number), the upgrade of both shafts is recommended.Contents:1 piece

€19.90*

Average rating of 0 out of 5 stars

y0321 Off-Road tuning springs Dirt-Spring M
federn_dirt_m Version: y0323/05 - M15, blue
Progressive tuning springs, will fit the standard red and the thick silver shocks on FG offroad cars. The rear springs will also fit Hurrax shocks. All springs have an internal diameter because of the manufacturing progress: 21 up to 21,5 mm. Available in several versions: For the front on FG 2WD buggies:y0322/01 - M1, 2,1 x 50 mm, yellowy0322/02 - M2, 2,2 x 50 mm, orangey0322/03 - M4, 2,4 x 50 mm, purpley0322/04 - M5, 2,5 x 50 mm, blueFor the rear on FG buggies, front and rear on FG monster cars and 4WD buggies:y0323/01 - M11, 2,1 x 90 mm, yellowy0323/02 - M12, 2,2 x 90 mm, orangey0323/03 - M13, 2,3 x 90 mm, redy0323/04 - M14, 2,4 x 90 mm, purpley0323/05 - M15, 2,5 x 90 mm, bluey0323/06 - M16, 2,6 x 90 mm, blackFor the front on FG buggies:y0324/01 - M01, 2,1 x 60 mm, yellowy0324/02 - M02, 2,2 x 60 mm, orangey0324/03 - M03, 2,3 x 60 mm, redy0324/04 - M04, 2,4 x 60 mm, purpley0324/05 - M05, 2,5 x 60 mm, bluey0323/06 - M16, 2,6 x 90 mm, blackContents:2 pieces

€17.90*

Average rating of 0 out of 5 stars

y1064 Cable ties, black, 202 x 2.5 mm, 20 pcs.
For the secure installation of driveshaft boots.

€3.90*

Average rating of 0 out of 5 stars

y0669 Rear alloy upright for 1:5 and 1:6 models
Genuine HT spare/option part. Rear alloy uprights for 1:5 and 1:6 models and 4WD Porsche, CNC-cut, optimal fitting, non-twisting even by heat.Dimensions:Bearing seats: 22 x 7 mmHinge pin bore: 6 mmDistance wheel shaft/hinge pin: 20 mmContents:1 set

€74.90*

Average rating of 0 out of 5 stars

68403, FG Alloy belt pulley housing 4WD, set
The set includes belt pulley housing right and left, screws. Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/ Stadium models 4WD RTR, 4WD Porsche.

€87.90*

Average rating of 0 out of 5 stars

66213/01 FG Alloy shock tower rear for Off-Road Buggy WB535
Genuine FG spare/option part.

€99.95*

Customers also viewed

%

Average rating of 0 out of 5 stars

y2004 Tuning aluminum rear suspension set for nearly all FG 4WD Sportsline cars
y2004 Model: y2004/02 - FG 4WD Touring car models (except Porsche GT3 RSR)
Tuning aluminum rear suspension set for nearly all FG 4WD Sportsline cars: Monster-Truck, Off-Road Buggy, Marder, Beetle, Tourenwagen.Does not fit Formula 1, Leopard and Truggy!Assembled units in the pictures are completed with some parts which are not included. These parts will be re-used from the stock suspension when swapping in the aluminum version. You will also need two bags of 6100/04 Turnbuckle left/right M8/40mm.y2004/01 fits:FG 4WD Monster-Truck models and Monster Beetle models, Off-Road, Marder, Beetle, Porsche GT3 RSR and Race Trucks. The only difference between the sets is the length of the lower a-arms (y2004/01 = long, y2004/02 = short). The picture of the assembled set is used for both versions and shows the shorter arms.Part number:Name:y2001Aluminum rear upper a-armsy68401Aluminum rear lower a-arms long66213Aluminum rear shock towery66205/06Aluminum rear diff mountsy2004/02 fits:FG 4WD Touring car models (except Porsche GT3 RSR).Part number:Name:y2001Aluminum rear upper a-armsy68401/01Aluminum rear lower a-arms short66213Aluminum rear shock towery66205/06Aluminum rear diff mountsy2004/03 fits:FG 4WD/2WD Off-Road WB535.Part number:Name:y2001Aluminum rear upper a-armsy68401Aluminum rear lower a-arms long66213/02Aluminum rear shock towery66205/06Aluminium rear diff mounts

€339.90* €379.40* (10.41% saved)

Average rating of 0 out of 5 stars

HT Aluminum rear suspension conversion kit for FG 1/6 cars,2WD, y0990, set, SO
Alloy rear axle conversion kit for all FG 2WD 1/6 cars: Marder, Off-Road Buggy, Beetle, Race Truck and all FG Monster / Stadium models.The set includes:- rear plate- differential mounts- lower a-arms- upper a-arms- installation hardware.Please note: must use inge pins 6075 instead of 6073!

€239.90*

Average rating of 0 out of 5 stars

y68400 Alloy damper plate/ alloy rear axle mounts 2WD/4WD, set
The set includes right and left rear axle mounts, damper plate and screws.Suitable for Off-Road Buggy 2WD/4WD RTR, Off-Road Beetle 4WD RTR and Monster/ Stadium models 4WD RTR, for all 2WD/4WD On-Road models. For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.https://rc-car-online.de/en-ersatzteile_main,15.html

€179.90*

Average rating of 0 out of 5 stars

y1137 GPM-Big Bore shocks, different versions to choose
2 pairs of shock absorbers, set Please select shock absorber version! Check which version you need! y1137/01 for FG, Carson 2 WD models y1137/02 for FG Monster/Stadium Truck 2 WD models y1137/03 for FG Marder/Offroad Buggy 4 WD models Y1137/04 for FG Monster/Stadium Truck 4 WD models y1137/05 for Carson 2 WD models y1137/06 for Kyosho Scorpion XXL models y1137/07 for Carson C5 and FG Sportsline TW models Y1137/08 for FG Evo models up to 2014 y1137/09 for FG Evo 2020 models from 2015 onwards GPM-Spezial Cross shocks, premium full metal version.Assembled and filled.Special features: 16 mm shock bore for increased capacity volume compensation shock body and caps machined from billet aluminum hard anodized shock body machined precision delrin pistons (not injection molded!) aluminum shaft end and spring retainer shock caps with replaceable bushings factory filled with 1000 GPM-Spezial Cross shocks, premium full metal version. >Assembled and filled. volume compensationshock body and caps machined from billet aluminumhard anodized shock bodymachined precision delrin pistons (not injection molded!)aluminum shaft end and spring retainershock caps with replaceable bushingsfactory filled with 1000 filling quantityshort 7mllong 9mlLong and short version availble in the following sets: y1137/01 Version 1 FG 2WD: Marder, Off-Road Buggy, Beetle, Monster BeetleCarson 2WD: Comanche, Attack Evo, CRT, CPT, Smartech Monster-Truck Set includes: 2 each long and short shocks y1137/02 Version 2 FG 2WD: Monster-Truck, Monster Jeep, Monster Hummer, Monster Beetle Pro, Stadium Truck, Stadium Jeep, Stadium Hummer Set includes: 4 long shocks y1137/03 Version 3 FG 4WD: Marder, Off-Road Buggy Set includes: 4 long shocks, one pair features 5 mm upper mounting bore y1137/04 Version 4 FG 4WD: Monster-Truck, Monster Jeep, Monster Hummer, Stadium Truck, Stadium Jeep, Stadium Hummer, Off-Road Beetle Set includes: 4 long shocks with a 5 mm mounting hole in the upper shock cap; 1 pair with standard lower shock mounts, the other pair with long lower shock mounts (4WD MT version) y1137/05 Version 5 Carson 2WD: Attack, Super Attack, Gas Blaster, Big AttackSmartech 2WD: UNO, Spider, Duratrax, Firehammer Set includes: 2 each long and short shocks with spacers for the front y1137/06 Version 6 Kyosho Scorpion XXL Set includes:4 short shocks with long shock mounts y1137/07 Version 7 Smartech C5 and FG Sportsline 1:5 touring cars 2WD and 4WD Set includes: 4 short shocks equipped with shock mounts y1137/08 Version 8 FG-Evo Modelle: 2008 - 2011 and Evo from 2012 an up Set includes: 4 short shocks equipped with shortened shock mounts y1137/09 Version 9 FG-Evo Modelle:2020 and 2020.1 from 2015 Set includes:4 short shocks equipped with shortened shock mounts Overall length, extended: long 155 mm, short 131 mm Mounting distance, extended: long 144,5 mm, short 120,5 mm Travel: long 43,5 mm, short 30,5 mm Inner diameter of spring: 21 mm Shock body diameter: 20 mm Eye bore: 4.5 mm Eye thickness: top 6 mm, bottom 5 mm Shaft diameter: 4 mm Shaft thread: M4 We recommend our progressive y0452/02. for these shocks. On FG cars the OEM springs can be used as well. Shock versions y1137/07 and y1137/08 for Smartech C5 and FG on-road cars should use spring Shock oil recommendations:The GPM-Spezial Cross shocks are factory filled with 1000 viscosity silicone oil. This gives a very good shock performance at normal ambient temperatures.When a softer shock is required, you can go for 500 or even 600 viscosity oil; 1500 and up if you prefer more damping.One 50 ml bottle fills 5 long or 6 short shocks.For use in a Kyosho Scorpion XXL (version 6), the shocks must be installed with an additional 4 mm spacer at the lower front mount (see picture above). The stock Scorpion springs can be used. We suggest silicone oil with a 100 to 200 viscosity for the front and a 200 to 300 viscosity for the rear .Introductory price! Regular price: 129,90 EUR / set

€149.90*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency