68403, FG Alloy belt pulley housing 4WD, set
€81.95
Available
Product information "68403, FG Alloy belt pulley housing 4WD, set"
Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/ Stadium models 4WD RTR, 4WD Porsche.
Lebacher Strasse 4
66113 Saarbrücken
Germany
Login
Customers also bought
Genuine HT spare/option part.The set includes uprights, steering arm, alloy stoppers, screws.Suitable for touring cars, 530/535 mm weelbaseContents:1 set For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.https://rc-car-online.de/en-ersatzteile_main,15.html
Genuine FG spare/option part. Contents:1 piece
Hazard and Precautionary StatementsHazard Statements (H-Code)H222Extremely flammable aerosol.H229Pressurized container: may burst if heated.H319Causes serious eye irritation.H336May cause drowsiness or dizziness.Precautionary Statements (P-Code)P210Keep away from heat, hot surface, sparks, open flames and other ignition sources. No smoking.P251Do not pierce or burn, even after use.P305P351P338IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P337P313IF eye irritation persists: Get medical advice/attention.P403P233Store in a well-ventilated place. Keep container tightly closed.P410P412Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.Supplemental hazard information.EUH066Repeated exposure may cause skin dryness or cracking.Farbe:Lexan SprayInhalt:150mlProduct information "RC - Paint Lexan special colors, spraycan (Offer) Buy 3 get 4"For every 3 cans purchased you will get 1 can for free.For example: if you select 4 cans our shop will charge them all when putting in the basket, but deduct one can during the check-out procedure later.RC - Paint is a special paint for lacquering RC-Car Lexan (Polycarbonate) body shells. The ultra-fine mist provides optimal coverage!Through an optimized atomizer valve an outstanding painting result is guaranteed.RC-Paint Lexan color is produced in a particularly environmentally friendly.The composition of colors (color pigments) was placed on the lowest possible heavy metal content and the best possible environmental compatibility of the solvent and propellent gas value.Contents:1 piece / 150 mlThe content of the can is 150ml and suffices - depending on the intensity of the painting, - for one 1/8 or two 1/10 body shells. Two to three cans are needed for a 1/5 or 1/6 body shell.
In details improved servo saver parts A+B. Through modification of the slant we improved the activation of the protective function. According to the use of the steering servo and the free movement of the servo saver the red and blue FG servo saver springs can be assembled. Suitable for the servo saver parts of servo saver 2010. Servo saver part B is made of high-strength aluminium.
Genuine FG spare/option part.Keeps the rear wing from bending downwards under high downforce.Contents:1 setFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.
Customers also viewed
Genuine FG spare/option part. Fits FG 2WD Marder.Offer your Marder a new life - it will be out of all recognition! Aggressive in the curves, dead on the line - just everything which guarantees pure driving fun. The well-tried 4WD by FG is now available as conversion kit for your 2WD Marder. You will not realize from the outside that the model is equipped with a fourwheel drive. But you and your rc-car friends will notice it considerably as soon as you start your model and speed up properly.The conversion kit includes all parts necessary to convert your 2WD Marder to a 4WD Buggy. A mounting instruction is enclosed.Please note: the radio plate is designed to accept a 805-sized servo (case length 65 mm). For installation of a Rhino (case length 58 mm) or a similar sized servo you need to order radioplate 68241 separately.Contents:1 set
Tuning aluminum rear suspension set for nearly all FG 4WD Sportsline cars: Monster-Truck, Off-Road Buggy, Marder, Beetle, Tourenwagen.Does not fit Formula 1, Leopard and Truggy!Assembled units in the pictures are completed with some parts which are not included. These parts will be re-used from the stock suspension when swapping in the aluminum version. You will also need two bags of 6100/04 Turnbuckle left/right M8/40mm.y2004/01 fits:FG 4WD Monster-Truck models and Monster Beetle models, Off-Road, Marder, Beetle, Porsche GT3 RSR and Race Trucks. The only difference between the sets is the length of the lower a-arms (y2004/01 = long, y2004/02 = short). The picture of the assembled set is used for both versions and shows the shorter arms.Part number:Name:y2001Aluminum rear upper a-armsy68401Aluminum rear lower a-arms long66213Aluminum rear shock towery66205/06Aluminum rear diff mountsy2004/02 fits:FG 4WD Touring car models (except Porsche GT3 RSR).Part number:Name:y2001Aluminum rear upper a-armsy68401/01Aluminum rear lower a-arms short66213Aluminum rear shock towery66205/06Aluminum rear diff mountsy2004/03 fits:FG 4WD/2WD Off-Road WB535.Part number:Name:y2001Aluminum rear upper a-armsy68401Aluminum rear lower a-arms long66213/02Aluminum rear shock towery66205/06Aluminium rear diff mounts
For FG 1/6 4WD competition cars only.Not suitable for conversion of an FG Sportline 4WD models since several small parts required for the swap are not included. As an alternative use item no. y0497.Suitable ball bearing for the layshaft: 6036/05 FG bearing set 10x19x7 with grease filling - 2 pcs
With this adapter you get all the major solo air boxes mounted on her solo motor.
Tuning aluminum engine mount set for all FG 4WD Sportsline cars: Monster-Truck, Off-Road Buggy, Marder, Beetle, Touring Cars.Inhalt:Aluminum large engine / layshaft mountAluminum small engine mountAll necessary screws are included!
Genuine FG spare/option part. Improved servo saver parts A + B with changes in detail. A change of the slope angle improves the protective function. Depending on the steering servo and the desired hardness of the servo saver red and blue FG servo saver springs are recommended. Fits the 2010 model servo saver.Contents:2 pieces