y1581 HT H6AC/DC compact charger, 50W up to 6S
Product information "y1581 HT H6AC/DC compact charger, 50W up to 6S"
HTRC charger with extremely easy 1-button operation. It charges the battery types commonly used in car modeling with mains or DC voltage supply. Infinitely adjustable charging current, automatic shut-off and balancer ports for 1S - 6S batteries are built in.
Output via 4 mm sockets to accept all charging cables with 4 mm banana plugs!
Output via 4 mm sockets to accept all charging cables with 4 mm banana plugs!
Specifications:
- AC input voltage: 100 - 240V
- DC input voltage: 10 - 18V
- Charging Power: 50W
- Charge Current Range: 0.1 - 5 A
- Max balancer current: 300mA / cell
- LiPo / LiFe cell count: 1 - 6 cells
- NiCd / NiMH battery cell count: 1 - 15 cells
- Size: 145 x 80 x 44 mm
- Weight: 170 g
Content:
- 1 x HTRC H6AC/DC charger
- 1 x T- connector charging cable
- 1 each adapters T-connector to BEC / Futaba / JR / alligator clips
- 1 x Mains cable
- 1 x DC input cable
- 1 x Instruction manual
Login
Customers also bought
Genuine FG spare/option part.Measures:Width: 111 mmHeight: 47 mmDepth: 23 mmContents:1 piece
y0428 Length:
y0428/01 - 180 mm
In case the servo cable is not long enough.Two selectable lengths:y0428/01 - 180 mmy0428/02 - 300 mm
akku_0018 Version:
y0415/01 Futaba/universal+ 2.4EUR
Genuine HT spare/option part.Charging cable for receiver batteries.Content:1 piece
Genuine FG spare/option part. Practical 220V charger, specially designed for RC cars. The TX/PACK CHARGER 2 enables the charging of a 7.2V drive battery or the transmitter battery.Two outputs: 11.6 V 180 mA (transmitter charging plug) and 7.2 V 180 mA (drive battery with Tamiya plug). Only use one output at a time!Contents:1 piece
Suitable for all FG/Carson/Smartech cars except FG Evo and Carson 4WD.Please note that tank mount 7143 is required for installation. Installation in a Carson/Smartech 1/6 off-road car requires drilling of two new 4.5 mm diameter holes into the chassis plate. Drilling template is included.Comes as shown with fuel lines, grommet and gas cap included.
Genuine FG spare/option part. Wheel / trigger type transmitter with ergonomic designRubber coated non-slip wheelLarge LCD display for easy settings10 model memoriesFHSS ModulationFailsafeDual rate on channels 1, 2 and 3Trims on the 3 channelsLow voltage (9,5V)7573/01 FG receiver 2,4 GHz fpr FG-RS3Contents:1 piece
Similar products
The little brother of the HT206AC/DC Duo. The T240 Duo AC/DC is very easy to use with the vertically angled 3,2" color touch display. The colorful app icons allow quick and clear navigation through the menu. The charger is cooled by a temperature controlled fan, which prevent overheating even at high outside temperatures.It is possible to charge two different batteries simultaneously with different charging settings. The T240 Duo AC/DC provides 2x 75 watt on AC, powered by a suitable external power supply 2x 120 watt are possible. Thus, each battery can be charged or discharged individually. The battery life can be increased with the balancing function.Output via 4 mm sockets to accept all charging cables with 4 mm banana plugs! Specifications: AC input voltage: 100 - 240V DC input voltage: 10 - 18V Charging Power: 2 x 120W (240W) Charge Current Range: 0.1 - 10 A x 2 Discharge current range: 0.1 - 2 A x 2 Discharge power: 10 W x2 (20 W) Max balancer current: 500mA / cell Lilon / LiPo / LiFe / LiHV cell count: 1 - 6 cells NiCd / NiMH battery cell count: 1 - 15 cells Pb Battery voltage: 2 - 20V Battery Memory: 6 profiles Size: 145 x 105 x 64 mm Weight: 480g Content: 1 x HTRC T240 Duo AC/DC charger 2 x T- connector charging cable 2 each adapters T-connector to Tamiya / XT60 / alligator clips 2 x Balancing Board 1 x Mains cable 1 x DC input cable 1 x Instruction manual
Ideal power supply for tire warmers! The Powerbase power supply delivers with 13.8 volts the ideal and constant current for tire warmers. A 45 mm cooling fan on the back keeps the Powerbase power supply running cool. Including a slow 4 A / 250v fuse for overload protection. Specifications: Input voltage: 190 - 240 Volts AC Output voltage: 13.8 volts regulated DCOutput connector: 4 mm plug / alligator clips For additional information pleas go to the Technical data tab. Tire warmers can be found under part numbers y1351/01 and y1351/02 or save with the complete set part number y1351/03.Contents:1 piece
Genuine FG spare/option part. Practical 220V charger, specially designed for RC cars. The TX/PACK CHARGER 2 enables the charging of a 7.2V drive battery or the transmitter battery.Two outputs: 11.6 V 180 mA (transmitter charging plug) and 7.2 V 180 mA (drive battery with Tamiya plug). Only use one output at a time!Contents:1 piece
Genuine Carson spare/option part. The Carson Expert Charger LiPo Compact 3A is a balancing quick charger for 2-, 3- and 4-cell LiPo batteries. Thanks to its excellent price/performance ratio it is ideal for beginners and on the road as a second mobile device. Four LEDs indicate operating and charging status.Technical details: Quick Charger For all 7.4 / 11.1 and 14.8 V LiPo batteries (2S / 3S / 4S) Gentle loading due to the balancer function Charge current 3000 mA Balancer connector system XHPContents:1 piece
Genuine Avio spare/option part. Charger for Futaba T7PX + T10PXAlso compatible with Carson Reflex Wheel transmitter systemsContents:1 piece
Genuine HT spare/option part.Version V2 with new design and quieter fans.Designed by professionals, this system is extremely versatile. The HT206AC / DC Duo 2 is very easy to use with the vertically angled 4.3" color touch display. The colorful app icons allow quick and clear navigation through the menu. The charger is cooled by a total of three powerful fans, which prevent overheating even at high outside temperatures. The heat dissipation is also increased by the aluminum housing.It is possible to charge two different batteries simultaneously with different charging settings. The HT206AC / DC Duo 2 provides a total of 400 watts, 200 watts per channel. Thus, each battery can be charged or discharged individually. The battery life can be increased with the balancing function.Specifications: AC input voltage: 110 - 240VDC input voltage: 10 - 30VDC output power: 5 - 27V, 0.1 - 20ACharging Power: 2 x 200W (400W) Charge Current Range: 0.1 - 20 A x 2Discharge current range: 0.1 - 5 A x 2 Max Discharge power: 25W x2 (50W) balancer current: 500mA / cellLilon / LiPo / LiFe / LiHV cell count: 1 - 6 cellsNiCd / NiMH battery cell count: 1 - 15 cellsPb Battery voltage: 2 - 20VMax. USB output: 5V / 2ABattery Memory: 8 profilesSub-function: digital power, balancer, IR testFirmware upgrade: External mini USB deviceSize: 195 x 143 x 70 mmWeight: 1072g Content: b> 1 x HTRC HT206AC / DC DUO charger 2 x T60 on banana connector adapter 2 x Balancing Board1 x Mains cable li> 1 x Instruction manual
Genuine FG spare/option part.Recommended for batteries with at least 200 mAh capacity.The charger is suitable for LiPo batteries from 2S to 4S (7.4 to 14.8 volt), connected via balancer port. The port has JST XH connector. Maximum charging current: 4 A, maximum charging output: 50 W.Charging current will be adjusted automatically. Removable mains cord (230 volt) is included.Content:1 piece
Genuine Dynamite spare/option part. specifications:Input voltage 100...240 V~Suitable for charging of 2S and 3S LiPo batteriesCharging current 2 ABalancer connector: JST-XHSize (LxWxH): 104 x 64 x 34 mmScope of delivery:ChargerDetachable AC cord with standardized European plug
Genuine T2M spare/option part. Microprocessor controlled charge/discharge function - Input voltage 11 to 18 V DCFor batteries of outdoor or indoor modelsIntegrated fanBattery types and cell counts: Ni-Cd/NI-MH 1-18 cells (Delta Peak) or Li-Ion/Li-Po/LiFe 1S - 6S and lead batteries from 2 to 20V.Adjustable charging current from 0.1 to 10A with 100mA increments (200W/output). Adjustable discharge current from 100mA to 5A (100 mA increments).Automatic trickle charge current from 0mA to 250 mA. Adjustable discharge cut-off voltage (increments of 0.1V).Constant charging current and charging voltage (Li-Ion, LiPo, LiFe and Pb).Charge/discharge cycle mode (discharge and charge/charge and discharge). 5 total cycles.1 backlit LCD display with two lines of 16 characters each.Protective devices against incorrect input voltage, faulty connections and reverse connections.2 integrated balancers are used to maintain and protect your lithium batteries (Li-Po, Li-Ion and LiFe) during the charging process with a tolerance of 5mV (during charging or discharging)Balancer current max. 250 mA.2 ports for temperature sensor (not included)XH balancer connector.Dimensions: 20 x 17.5 x 7.3 cm Weight: 880g.Contents:1 piece
Customers also viewed
The little brother of the HT206AC/DC Duo. The T240 Duo AC/DC is very easy to use with the vertically angled 3,2" color touch display. The colorful app icons allow quick and clear navigation through the menu. The charger is cooled by a temperature controlled fan, which prevent overheating even at high outside temperatures.It is possible to charge two different batteries simultaneously with different charging settings. The T240 Duo AC/DC provides 2x 75 watt on AC, powered by a suitable external power supply 2x 120 watt are possible. Thus, each battery can be charged or discharged individually. The battery life can be increased with the balancing function.Output via 4 mm sockets to accept all charging cables with 4 mm banana plugs! Specifications: AC input voltage: 100 - 240V DC input voltage: 10 - 18V Charging Power: 2 x 120W (240W) Charge Current Range: 0.1 - 10 A x 2 Discharge current range: 0.1 - 2 A x 2 Discharge power: 10 W x2 (20 W) Max balancer current: 500mA / cell Lilon / LiPo / LiFe / LiHV cell count: 1 - 6 cells NiCd / NiMH battery cell count: 1 - 15 cells Pb Battery voltage: 2 - 20V Battery Memory: 6 profiles Size: 145 x 105 x 64 mm Weight: 480g Content: 1 x HTRC T240 Duo AC/DC charger 2 x T- connector charging cable 2 each adapters T-connector to Tamiya / XT60 / alligator clips 2 x Balancing Board 1 x Mains cable 1 x DC input cable 1 x Instruction manual
Genuine Champion spare/option part.OEM spark plug for Zenoah G230/240/260/270/290/320.Ideal too for PT, Chung Yang, Losi, HPI-Fuelie, Smartech, Nutech and Carson and other engines.The most widely used, qualitatively best spark plug for the model sport! Especially by the most 1/6 scale models the short ceramic body is indispensable, because otherwise on grounds of the heightened mounting position- the spark plug would protrude beyond the roll cage and therefore is extremely fragile by flashovers.Contents:3 pieces
The 2WD-465 Sportsline model is built on the short chassis with double a-arms suspension front and rear. The vehicle is equippedwith the 2-shocks front suspension as standard, which ensures optimum traction for both front wheels.On the GT2, the front axle has been widened to 384 mm. The rear axle is 395 mm wide.Technical description:The model has a 465 wheelbase. The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, rear brace, 24T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The models are equipped with a powerful 23ccm combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.To complete the models all merchantable servos and radio control systems are suitable. The RTR version comes with complete factory installed rc-system, including Ni-Cads! The car comes with an unpainted body shell.The FG 5164 decor sheet is not included!Also available painted in the shop selection!Dimensions: Length: 840 mm Width: 395 mm Height: 250 mm Wheelbase: 465 mm Touring cars in action!Painting tips:
The FG Sportsline Formula 1 electric convinces not only by its appearance, but rather by its technical achievements. The unique details such as push rods, horizontal oil pressure shock absorbers, double wishbone and much more can be found in almost no other model.The chassis is built on a high-strength 5mm aluminum chassis plate and thus offers extreme stability. Countersunk holes in the chassis plate allow the screws to be flush, ensuring a flat surface under the model. Versatile adjustment options on the front and rear axles allow the model to be perfectly adapted to your own needs. Adjustments such as camber, caster, etc. are no problem whatsoever, even for beginners, and are made via the double a-arms, which provide maximum stability at the rear axle by means of additional track rods. Also the adjustable aluminum oil filled shock absorbers convince on full length and offer maximum performance even on a very difficult underground. The above mentioned push-rod suspension enables play-free power transfer from the suspension to the shock absorbers, which is essential for precise driving.The factory-mounted combination of 980KV motor and 160A MAX6 esc provides performance that is second to none. With a 6S 22.2V (4S 14.8V is also possible) LiPo batteries, the motor reaches a final speed of about 25,000 rpm, leaving a comparable combustion engine far behind. The braking is done by the 980KV motor and is very strong. Within a few meters the model comes from top speed to a standstill. Those who have searched in vain for reverse gear with a combustion engine will find it with the electric version. The operation is very easy, if you press the brake lever once, you hit the brakes. If you press the brake lever twice, you shift into reverse. With the help of a programming card (available separately) you can adjust all ESC values according to your needs. This includes setting options for power, brake force, low-voltage protection and much more. Furthermore, the model has the following technical: Features: 160A MAX6 esc, 6S compatible (4S also possible) 980KV brushless motor Waterproof components Adjustable aluminum oil filled shock absorbers Aluminum levers for the shocks Aerodynamic Lexan body shell 5mm thick aluminum chassis plate Mounting compartment for steering servo Mounting compartment for separate brake servo (for mechanical/hydraulic brakes) Cogged belt drive Side battery mounts for optimal weight distribution Custom CNC machined motor mount Unique double a-arms Push rod suspension Treaded F1 tires Tuning ball drive shafts Dimensions: Length: 960 mm BrWidtheite: 440 mm Height: 230 mm Wheelbase: 620 mm Technical data 980KV brushless motor: Max. Voltage: 33V Max. Current: 130A Max. Speed: 30.000RPM Power in watts: 4250W Rotor poles: 4 No-load current: 2.8A Resistance: 0.0128 Length: 82mm Diameter: 55 / 58mm with fins Weight: 880g Shaft diameter: 8mm Free shaft length: 30mm Weight: 880g Technical data Max6 esc: Continuous current: 160A Peak current: 1050A Battery: 3S - 8S LiPo or 9-24 cells NiMH BEC: 6V/7,2V - 3A/6A Abmessungen:70x56x46,5mm Weight: 240g Note: In our online shop you can also find a detailed 360° illustration, where especially the technology of the FG Formula1 electric chassis can be seen.Note battery mounting:When mounting the l/h side LiPo battery, you must always make sure that it does not rub against the drive pulley. For this purpose, a 5 mm thick piece of foam mat or something similar between battery and battery holder is sufficient to ensure an appropriate distance. For driving you still need: 2 drive batteries incl. charger Battery dimensions maximum: Length 143 mm/5,6 Width 48 mm/1,9 Height 40 mm/1,6 Connector EC8 The RTR equipment (remote control and steering servo!) The body shell comes unpainted! In our online store you can use our store configurator (shopping cart selection / options menu) to add the desired parts, as well as the completely painted body. Here at our Ebay offer selectable: RTR equipment (remote control and steering servo) fully assembled! Painted body shell incl. decals Formular 1 models in action!
The Sportsline quality at a reasonable price for beginners. For rookies and all those who simply just want to have fun and drive a DTM Audi, Mercedes or a fast Porsche. The Sportsline series is ideal for car modellers whose main focus is not just the chassis, but rather the combination of chassis and body shell.Technical description:The model has a 535 wheelbase. The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, Evo gas tank, rear brace, 24T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The models are equipped with a powerful 23ccm combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.To complete the models all merchantable servos and radio control systems are suitable. The RTR version comes with complete factory installed rc-system, including Ni-Cads!Dimensions: Length: 780 mm Width: 392 mm Height: approx. 240 mm Wheelbase: 530 mm The car comes with an unpainted body shell!Touring cars in action!Painting tips:
Genuine Carson spare/option part. The Reflex Wheel Pro III is the innovative 2-channel entry-level RC system from Carson-Model Sport. The steering angle and the servo travel on the throttle are adjustable (Dual Rate). This allows each model to be controlled very precisely and tuned to the road. In addition, the throttle can be limited for beginners and children. The chrome steering wheel with cellular rubber surface allows precise control and can be tilted individually forwards and backwards. The automatic stop function (low-voltage protection) integrated in the receiver is the life guard for your combustion engine model. This remote control system is ideal for all areas of RC-Car sport.Absolutely ingenious yet simple is the binding procedure:1. Switch the receiver on2. Press the setup key3. Switch on the transmitter - READY!Technical details: Operating voltage transmitter 4.8 to 6 V Operation possible with Li-Ion battery or 4x AA NiMh cells 2.4 GHz FHSS system (frequency hopping spread spectrum) Two infinitely variable, fully proportional channels Servo reverse for both channels (reverse direction) Trim function for throttle and steering Dual Rate for both channels (servo travel limit) Power supply of the BEC receiver from a battery with 4.8 - 7.2V possible Integrated fail-safe (programmable) Uni connector system for Futaba and Graupner-JR Charging socket (positive center pole) Battery status indication by means of LEDContents:1 x 2-channel transmitter 2.4 GHzBEC Mini receiver
%
Genuine K&N spare/option part. The K+N air filter oil is only suitable for all K+N air filters, foam preliminary filters and filter inserts.Content:1 piece / 204 ml
Content: 204 Milliliter (€78.97* / 1000 Milliliter)