T1244 T2M Wizard Duo 200 Charger

T2M

€119.90*

Prices incl. VAT plus shipping costs

No longer available

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product number: t2m_t1244

EAN: 3410560012448

Product information "T1244 T2M Wizard Duo 200 Charger"

Genuine T2M spare/option part.

Microprocessor controlled charge/discharge function - Input voltage 11 to 18 V DC
For batteries of outdoor or indoor models
Integrated fan
Battery types and cell counts: Ni-Cd/NI-MH 1-18 cells (Delta Peak) or Li-Ion/Li-Po/LiFe 1S - 6S and lead batteries from 2 to 20V.
Adjustable charging current from 0.1 to 10A with 100mA increments (200W/output).
Adjustable discharge current from 100mA to 5A (100 mA increments).
Automatic trickle charge current from 0mA to 250 mA.
Adjustable discharge cut-off voltage (increments of 0.1V).
Constant charging current and charging voltage (Li-Ion, LiPo, LiFe and Pb).
Charge/discharge cycle mode (discharge and charge/charge and discharge). 5 total cycles.
1 backlit LCD display with two lines of 16 characters each.
Protective devices against incorrect input voltage, faulty connections and reverse connections.
2 integrated balancers are used to maintain and protect your lithium batteries (Li-Po, Li-Ion and LiFe) during the charging process with a tolerance of 5mV (during charging or discharging)
Balancer current max. 250 mA.
2 ports for temperature sensor (not included)
XH balancer connector.
Dimensions: 20 x 17.5 x 7.3 cm
Weight: 880g.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

y1581 HT H6AC/DC compact charger, 50W up to 6S

HTRC charger with extremely easy 1-button operation. It charges the battery types commonly used in car modeling with mains or DC voltage supply. Infinitely adjustable charging current, automatic shut-off and balancer ports for 1S - 6S batteries are built in.Output via 4 mm sockets to accept all charging cables with 4 mm banana plugs! Specifications: AC input voltage: 100 - 240V DC input voltage: 10 - 18V Charging Power: 50W Charge Current Range: 0.1 - 5 A Max balancer current: 300mA / cell LiPo / LiFe cell count: 1 - 6 cells NiCd / NiMH battery cell count: 1 - 15 cells Size: 145 x 80 x 44 mm Weight: 170 g Content: 1 x HTRC H6AC/DC charger 1 x T- connector charging cable 1 each adapters T-connector to BEC / Futaba / JR / alligator clips 1 x Mains cable 1 x DC input cable 1 x Instruction manual

€49.90*

T1257 FG Universal Charger with many adaptor cables

Genuine FG spare/option part. Practical 220V charger, specially designed for RC cars. The TX/PACK CHARGER 2 enables the charging of a 7.2V drive battery or the transmitter battery.Two outputs: 11.6 V 180 mA (transmitter charging plug) and 7.2 V 180 mA (drive battery with Tamiya plug). Only use one output at a time!Contents:1 piece

€27.90*

500606068 Carson Expert Charger LiPo Compact 3A

Genuine Carson spare/option part. The Carson Expert Charger LiPo Compact 3A is a balancing quick charger for 2-, 3- and 4-cell LiPo batteries. Thanks to its excellent price/performance ratio it is ideal for beginners and on the road as a second mobile device. Four LEDs indicate operating and charging status.Technical details: Quick Charger For all 7.4 / 11.1 and 14.8 V LiPo batteries (2S / 3S / 4S) Gentle loading due to the balancer function Charge current 3000 mA Balancer connector system XHPContents:1 piece

€29.99*

y1507 V2 HT206AC/DC Duo 2 6S professional 400W charger

Genuine HT spare/option part.Version V2 with new design and quieter fans.Designed by professionals, this system is extremely versatile. The HT206AC / DC Duo 2 is very easy to use with the vertically angled 4.3" color touch display. The colorful app icons allow quick and clear navigation through the menu. The charger is cooled by a total of three powerful fans, which prevent overheating even at high outside temperatures. The heat dissipation is also increased by the aluminum housing.It is possible to charge two different batteries simultaneously with different charging settings. The HT206AC / DC Duo 2 provides a total of 400 watts, 200 watts per channel. Thus, each battery can be charged or discharged individually. The battery life can be increased with the balancing function.Specifications: AC input voltage: 110 - 240VDC input voltage: 10 - 30VDC output power: 5 - 27V, 0.1 - 20ACharging Power: 2 x 200W (400W) Charge Current Range: 0.1 - 20 A x 2Discharge current range: 0.1 - 5 A x 2 Max Discharge power: 25W x2 (50W) balancer current: 500mA / cellLilon / LiPo / LiFe / LiHV cell count: 1 - 6 cellsNiCd / NiMH battery cell count: 1 - 15 cellsPb Battery voltage: 2 - 20VMax. USB output: 5V / 2ABattery Memory: 8 profilesSub-function: digital power, balancer, IR testFirmware upgrade: External mini USB deviceSize: 195 x 143 x 70 mmWeight: 1072g Content: b> 1 x HTRC HT206AC / DC DUO charger 2 x T60 on banana connector adapter 2 x Balancing Board1 x Mains cable li> 1 x Instruction manual

€349.90*

LOSB 9642 Global AC 6V Charger 5T

Genuine Losi spare/option part. Contents:1 set

€29.99*

6557 FG LiPo charger Wizard Box

Genuine FG spare/option part.Recommended for batteries with at least 200 mAh capacity.The charger is suitable for LiPo batteries from 2S to 4S (7.4 to 14.8 volt), connected via balancer port. The port has JST XH connector. Maximum charging current: 4 A, maximum charging output: 50 W.Charging current will be adjusted automatically. Removable mains cord (230 volt) is included.Content:1 piece

€59.90*

Details

DYNC0505W Dynamite 20W Li-Po charger 2A

Genuine Dynamite spare/option part. specifications:Input voltage 100...240 V~Suitable for charging of 2S and 3S LiPo batteriesCharging current 2 ABalancer connector: JST-XHSize (LxWxH): 104 x 64 x 34 mmScope of delivery:ChargerDetachable AC cord with standardized European plug

€32.99*

P-HBC-3C Futaba plug-in charger, 1 piece

Charger for various Futaba transmitter and receiver batteries Input voltage: 100-240 V Charging (battery type): NiMH, Tx/Rx Charging cable supplied: Futaba TX output: 6V/170mA RX output: 6V/100mA 1 piece

€39.90*

F002 Charger for HPI / Carson receiver battery

Genuine spare/option part. Contents:1 piece

€24.90*

y1580 HT T240 Duo AC/DC, 2 x 120W, up to 2x 6S, charger, used

The charger was replaced due to small scratches on the display. It was checked in our workshop. Here are the technical data:The little brother of the HT206AC/DC Duo. The T240 Duo AC/DC is very easy to use with the vertically angled 3,2" color touch display. The colorful app icons allow quick and clear navigation through the menu. The charger is cooled by a temperature controlled fan, which prevent overheating even at high outside temperatures.It is possible to charge two different batteries simultaneously with different charging settings. The T240 Duo AC/DC provides 2x 75 watt on AC, powered by a suitable external power supply 2x 120 watt are possible. Thus, each battery can be charged or discharged individually. The battery life can be increased with the balancing function.Output via 4 mm sockets to accept all charging cables with 4 mm banana plugs!Specifications:AC input voltage: 100 - 240VDC input voltage: 10 - 18VCharging Power: 2 x 120W (240W)Charge Current Range: 0.1 - 10 A x 2Discharge current range: 0.1 - 2 A x 2Discharge power: 10 W x2 (20 W)Max balancer current: 500mA / cellLilon / LiPo / LiFe / LiHV cell count: 1 - 6 cellsNiCd / NiMH battery cell count: 1 - 15 cellsPb Battery voltage: 2 - 20VBattery Memory: 6 profilesSize: 145 x 105 x 64 mmWeight: 480gContent:1 x HTRC T240 Duo AC/DC charger2 x T- connector charging cable2 each adapters T-connector to Tamiya / XT60 / alligator clips2 x Balancing Board1 x Mains cable1 x DC input cable1 x Instruction manual

€129.00*

Customers also viewed

y1507 V2 HT206AC/DC Duo 2 6S professional 400W charger

€349.90*

T1244/2 Safety Bag for LiPo batteries

Genuine T2M spare/option part.For secure transport and storage of LiPo batteries.For batteries up to approx. 175 x 75 x 70 mm.Contents:1 piece

€15.00*

FG Elektric 4WD Monster-Truck WB535, ESC 150A and Brushless Motor 6S

No matter where you will set this model into action - you will always be right in front with the FG Monster-Truck 4E! The E stands for electric power, the 4 means fourwheel drive. Extremely fast, terrific torque and all this without any engine noise. The Model is equipped with a powerful Brushless Motor and a ESC.You can select the car with complete RTR-equipment from the options menu. RTR equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. The control can be regulated simply via transmitter or optionally via a program card. For the final assembling you need LiPo batteries and the suitable charger. For an unproblematic mounting we recommend to use LiPo batteries with a max. length of 150mm and a width of 50mm. The model is delivered with the EC8 connector system.Dimensions:Length: 710 mmWidth: 510 mmHeight: 390 mmWheelbase: 535 mm

From €1,229.90*

Configure now

Mielke 5740 Power Gearshift tuning clutch for Genius, Mecatech, S88R, FBX, Carbon, 2,0 mm springs

Genuine Mielke spare/option part. For onroad vehicles, less Grip or rain use.The new adjustable system features three carbon pads with special 2.0 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm. Contents:1 piece

€129.50*

OS00.004 OSKART Go-cart RTR, 1/2 scale

OSKART, 1/2 scale premium quality RTR go-cart; with 33 cc engine and complete Spektrum DX2 remote control, including servos, charger, and all required accessories!The OS-Kart comes with a powerfull 33 cc engine whin run on regular 2-stroke mix from a gas station. The 0.7 liter tank lasts for a runtime of approx. 45 minutes.The colour combinations each of the OSKART and driver are different.Fully assembled and ready to run!Dimensions:Length: approx. 900 mmWidth: approx. 630 mmHeight: approx. 470 mmWeight (ready to run): 15 kgThe OSKART comes in a special high quality wooden crate.Shipping weight incl. crate: 30 kg! (approx. 66 lbs)

€1,999.00*

This product is currently not available.