y1507 V2 HT206AC/DC Duo 2 6S professional 400W charger
Product number:
y1507
Product information "y1507 V2 HT206AC/DC Duo 2 6S professional 400W charger"
Genuine HT spare/option part.
Version V2 with new design and quieter fans.
Designed by professionals, this system is extremely versatile. The HT206AC / DC Duo 2 is very easy to use with the vertically angled 4.3" color touch display. The colorful app icons allow quick and clear navigation through the menu. The charger is cooled by a total of three powerful fans, which prevent overheating even at high outside temperatures. The heat dissipation is also increased by the aluminum housing.
It is possible to charge two different batteries simultaneously with different charging settings. The HT206AC / DC Duo 2 provides a total of 400 watts, 200 watts per channel. Thus, each battery can be charged or discharged individually. The battery life can be increased with the balancing function.
Specifications:
- AC input voltage: 110 - 240V
- DC input voltage: 10 - 30V
- DC output power: 5 - 27V, 0.1 - 20A
- Charging Power: 2 x 200W (400W)
- Charge Current Range: 0.1 - 20 A x 2
- Discharge current range: 0.1 - 5 A x 2 Max
Discharge power: 25W x2 (50W) - balancer current: 500mA / cell
- Lilon / LiPo / LiFe / LiHV cell count: 1 - 6 cells
- NiCd / NiMH battery cell count: 1 - 15 cells
- Pb Battery voltage: 2 - 20V
- Max. USB output: 5V / 2A
- Battery Memory: 8 profiles
- Sub-function: digital power, balancer, IR test
- Firmware upgrade: External mini USB device
- Size: 195 x 143 x 70 mm
- Weight: 1072g
Content: b>
1 x HTRC HT206AC / DC DUO charger 2 x T60 on banana connector adapter 2 x Balancing Board1 x Mains cable li> 1 x Instruction manual
Login
Kunden haben auch gesehen
Kunden haben auch gesehen
The little brother of the HT206AC/DC Duo. The T240 Duo AC/DC is very easy to use with the vertically angled 3,2" color touch display. The colorful app icons allow quick and clear navigation through the menu. The charger is cooled by a temperature controlled fan, which prevent overheating even at high outside temperatures.It is possible to charge two different batteries simultaneously with different charging settings. The T240 Duo AC/DC provides 2x 75 watt on AC, powered by a suitable external power supply 2x 120 watt are possible. Thus, each battery can be charged or discharged individually. The battery life can be increased with the balancing function.Output via 4 mm sockets to accept all charging cables with 4 mm banana plugs! Specifications: AC input voltage: 100 - 240V DC input voltage: 10 - 18V Charging Power: 2 x 120W (240W) Charge Current Range: 0.1 - 10 A x 2 Discharge current range: 0.1 - 2 A x 2 Discharge power: 10 W x2 (20 W) Max balancer current: 500mA / cell Lilon / LiPo / LiFe / LiHV cell count: 1 - 6 cells NiCd / NiMH battery cell count: 1 - 15 cells Pb Battery voltage: 2 - 20V Battery Memory: 6 profiles Size: 145 x 105 x 64 mm Weight: 480g Content: 1 x HTRC T240 Duo AC/DC charger 2 x T- connector charging cable 2 each adapters T-connector to Tamiya / XT60 / alligator clips 2 x Balancing Board 1 x Mains cable 1 x DC input cable 1 x Instruction manual
Genuine Dynamite spare/option part. The Dynamite® Passport Duo 400W Dual AC/DC Touch Charger builds on the success of the the previous non-touch version and adds an intuitive easy to use touch screen interface and HV charging capabilities.Key Features:Intuitive Touch Screen DisplayHV (High Voltage) charging / discharging / balancingCharges Li-Po/Li-Fe/ (1-6 cell), Ni-MH (1-15 cell) and Pb battery types500W internal power supply0.1-10.0A Adjustable charge current per outputSpace saving dual output design200W charge power per output100-240 VAC (50/60Hz) or 11-18V DC input voltage25W discharge power per outputDetachable AC power cord / Optional DC power cordIncludes 2 EC3 charge connector and a variety of other connectors includedShort circuit protectionOver temperature protection / Over current protectionLow input voltage protectionContents:1 x Passport Duo 400W Dual AC/DC Touch Charger1 x LiPo Charge Protection Bag, Small2 x Heavy duty insulated banana to EC3 battery adapter2 x Heavy duty insulated banana to XT.60 battery adapter1 x Heavy duty banana to Deans compatible battery adapter1 x Heavy duty banana to Rx battery adapter2 x Balancer adapter board
Genuine ZTW spare/option part. For programming the ZTW Beast Pro 300A 12S ESC and 200A 8S ESC as well as for connection to a PC and for firmware updates of the esc.The Gecko software from ZTW on the PC is required for this: Specification:Length: 91 mmWidth: 54 mmHeight: 18 mmWeight: 68gPower supply: DC 5.0V - 12.0VContents:1 piece
%
HTRC charger with extremely easy 1-button operation. It charges the battery types commonly used in car modeling with mains or DC voltage supply. Infinitely adjustable charging current, automatic shut-off and balancer ports for 1S - 6S batteries are built in.Output via 4 mm sockets to accept all charging cables with 4 mm banana plugs! Specifications: AC input voltage: 100 - 240V DC input voltage: 10 - 18V Charging Power: 50W Charge Current Range: 0.1 - 5 A Max balancer current: 300mA / cell LiPo / LiFe cell count: 1 - 6 cells NiCd / NiMH battery cell count: 1 - 15 cells Size: 145 x 80 x 44 mm Weight: 170 g Content: 1 x HTRC H6AC/DC charger 1 x T- connector charging cable 1 each adapters T-connector to BEC / Futaba / JR / alligator clips 1 x Mains cable 1 x DC input cable 1 x Instruction manual
This model is fitted with numerous aluminium parts: front and rear side bulkheads, rockers, engine mount, suspension arm ends...Steel made Uniball sockets all possible enable all adjustments of the front and rear suspensions.The transmission made with a gearwheell drive offers outstanding reliability and smooth operation.Just like all other FG Competition models the FG Formula 1 Competition is the most successful model of the past years. The experiences we gained from numerous competitions have all influenced this version. The FG gearwheel drive which is extremely smooth running and cares for more power reserves. Surely FG Modellsport has created a competitive model for the next years with this version which will seamlessly follow up on the past successes. Highlights Alloy wishbones FG gearwheel drive Alloy rear axle plate FG alloy shock absorbers 04 Ball-bearing alloy servo saver 26 ccm Zenoah-Engine Airbox Tuned pipe Front- and rear brake 5 mm Chassis Lexan body shell Technical description of the FG Formula 1 Competition ki:The undercarriage of the FG Formula 1 Competition is built on an 5mm alloy chassis. All screws at the bottom of the chassis are countersunk.Front and rear axle mounts as well as the engine unit are connected over the complete length of the chassis, therefore we achieved almost the stiffness of a monocoque chassis. The quick fix system of the engine makes a fast changing of the engine possible. The drive to the rear axle is carried out over several easy-running front gearwheels and an FG ball drive at the rear axle. A separate flange bearing holds the clutch bell in order to relieve the crankshaft. Front and rear axle with their various adjusting possibilities as king pin angle, castor a.s.o. consist of alloy delta wishbones below. Solid alloy rear axle plates reduce the wear at the rear axle and give an enormous driving stability. 4 oil-pressure shock absorbers controlled by a pushrod suspension as well as stabilizers guarantee an optimal ground contact.We deliver the chassis selectively with tuning bowden cable brakes for front or respectively rear axle. The model is powered by a high-capacity 26 cm³ engine with airbox and Tuning pipe.Equipment of the FG Formula 1 Competition kitCNC-cut 5mm alloy chassis with lateral carbon fiber inserts, 26 cm³ engine, inlet silencer, Tuning pipe, FG gearwheel drive, ball drive, complete rear and front axle carrier unit with integrated engine quick-fixing device, double alloy wishbone fastenings, lower alloy delta wishbones at front and rear axle, front and rear alloy uprights, ball-bearing servo saver, steering stops, pushrods, 4 oil-pressure shock absorbers with alloy damper pistons, mechanical Tuning brakes at front and rear, stabilizer for front and rear axle, 10mm alloy balls, rear spoiler, polycarbonate body shell, polyamide front spoiler, receiver box, competition tires with tire inserts.We deliver the models as a kit including mounting instruction. The body parts are made of clear polycarbonate for your own painting. FG stickers and writings are enclosed.For the final assembly of the models you need further: radio control system (transmitter, receiver), 1 large steering servos (each approx. 40 - 50 kg), 2 servo for throttle brake (approx. 20 - 30 kg), batteries and charger.These parts are not included and must be supplied or ordered separately when the rc installation option is selected! Includet Zenoah 26cc engine Clear bodyshell and polycarbonate spoiler Mechanical brakesDimensions Length: 960mm Width: 440mm Height: 230mm Wheelbase: 620mm Formular 1 models in action!
Beast Edition: Standard equipment: Beast Edition: Motor: 780kV 520kV Regler: 160 Ampere 300 Ampere S-Leistung: 8S 12S The original DBXL-E set the world on fire as the go-to vehicle for large scale bashers and enthusiasts alike. Its agile handling, out of the box speeds and durability make it a fan favorite. Now the Losi® DBXL-E 2.0 continues to build on the legendary status! Known worldwide for their dominance in the gas 1/5 market, especially with the 5IVE-T 2.0, Losi has built the DBXL-E 2.0 to be cleaner and easier to use, but with performance and speed that outruns the competition. At home in any environment from dirt to pavement, wet or dry, especially with its 4WD drivetrain with larger 5mm drive pins, the desert buggy makes sure all the power is put to the ground. Drivers stay in control with a DX3 transmitter, a Spektrum SR6100AT 6 Channel AVC® Telemetry Surface Receiver, and scale-to-size Maxxis Creepy Crawler LT tires. This desert buggy features all the technological advances drivers. Finally, the DBXL-E 2.0 has a Losi race-inspired motorsports themed livery for that true off-road look. You get all this and more from the brand that represents the pinnacle of performance.The Full-Throttle Freedom of AVC® TechnologyThe receiver's built-in AVC® (Active Vehicle Control®) traction control system works behind the scenes, making hundreds of throttle and steering adjustments per second, so more of the motor's power is translated into ballistic speed and acceleration instead of just flying dirt. The patent-pending AVC system adds a level of performance that simply cannot be found with any vehicle from any manufacturer other than Horizon Hobby. Like traction control in your full-scale vehicle, you can activate or deactivate the system on the fly and adjust the level of stability based on driving conditions. Any RC vehicle can go fast and with AVC you can go faster while maintaining optimum stability in all driving conditionFeatures ZTW BEAST Pro 300A 12S ESC Top Tuning BEAST Brushless Motor 520 kV Spektrum DX3 radio system with AVC® and new SR6100AT Receiver Spektrum S906 1/5th scale metal gear servo Water protected components Aluminum Shock Towers Aluminum Center Diff Cup New Radio Tray designed for use with single or dual steering servos. New Heavy Duty Drivetrain with 5mm drive pins New Electric Chassis specific chassis braces for increased durability and strength Spedial motor adapter plate Modified ESC mounting bracket Beast decal sheet New ESC Mount Pinned Center Outdrive Cups New Gearboxes for improved drivetrain strength and stability New Steering Rack with helical servo saver design Updated Front and Rear Bulkheads Maxxis Creepy Crawler LT Tires Losi and Fox Shox race-inspired Motorsports themed livery Laser Etched FOX Logo Shock Caps Roof-mounted LED bar Dimensions Height: 317 mm Length: 844 mm Width: 495 mm Weight: 9,8 kg
Cutsomers also bought
Cutsomers also bought
Genuine Top Tuning spare/option part.For secure transport and storage of LiPo batteries. For batteries up to approx. 175 x 75 x 70 mm.Contents:1 piece
Genuine Smartech spare/option part.Dimensions: Diameter: 36 mm Square size: 15 mmContent:2 pieces
Hardened spark plug connecting caps, low wear at vibrations, therefore hardly disturbances. Suitable for all spark plugs with a connecting thread M4.
Genuine ARRMA spare/option part. Contents:1 set
Genuine HPI spare/option part. Spare part for the trottle servo SF-2 and SF-3.Content:1 set