LOSB 9642 Global AC 6V Charger 5T

€29.99*

Prices incl. VAT plus shipping costs

Available

Product number: losi_losb9642

EAN: 4058575116370

Product information "LOSB 9642 Global AC 6V Charger 5T"

Genuine Losi spare/option part.

Contents:

1 set

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

LOSB5972 Losi Outer Axle Ball Bearings sealed, 12 x 24 x 6 mm, Losi 5ive-T/2.0, TLR 5ive-B and Mini WRC.

Fits Losi 5ive-T, TLR 5ive-B and Mini WRC.Dimensionally identical with B59010 / B59011.Content:2 pieces

€9.99*

Details

LOS45007 Beadlock Set, Inner & Outer fluorescent orange 5T

Genuine Losi spare/option part.The set is for two tires (one pair).Content:1 set

€19.99*

LOSB6560 Losi Drive Pin Set 5ive-T, TLR 5ive-B and Mini WRC

Genuine Losi spare/option part. Suitable for Losi 5ive-T, TLR 5ive-B and 5ive Mini WRC. Part is delivered in silver or black color from vendor!Measures and content:4 x 18 mm - 6 pieces5 x 25 mm - 4 pieces4 x 20 mm - 6 pieces

€10.99*

LOSB6490 Losi 6mm BH & FH Screw Asst 5ive-T, TLR 5ive-B and Mini WRC

Genuine Losi spare/option part. Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini WRC. Part is delivered in silver or black color from vendor!Content:20 pieces

€8.99*

Details

LOSB6535 Losi Washer Assortment, six sizes 5ive-T, TLR 5ive-B and Mini WRC

Genuine Losi spare/option part. Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini WRC.Part is delivered in silver or black color from vendor!Contents:1 set

€7.99*

LOSB 6591 Side Cage Nut-Inserts 5ive-T and Mini

Genuine Losi spare/option part. Fits Losi 5ive-T and 5ive Mini. Content:4 pieces

€19.99*

LOSB5975 Losi Clutch Bell Bearings, 15x28x7mm, Losi 5ive-T/2.0, TLR 5ive-B and Mini WRC.

Genuine Losi spare/option part.Fits Losi 5ive-T, TLR 5ive-B and Mini WRC.Dimensionally identical with B56076Content:2 pieces

€29.99*

LOSB 8255 5IVE Sticker & Graphic Sheet Set black/white 5T

Genuine Losi spare/option part.Dimensions:Decal A: width 486 mm, Hight 360 mmDecal B: width 405 mm, Hight 319 mmDecal C: width 398 mm, Hight 265 mmDecal D: width 350 mm, Hight 255 mmDecal E: width 315 mm, Hight 180 mmContents:1 set

€48.99*

LOSB 8220 Vehicle decals for Losi 5ive-T

losi_losb8220 Elasto film: Original film

Genuine Losi spare/option part.Includet: Grill, Lights and Losi logo stickers.Content:1 piece

€24.90*

Details

LOSB6085 Losi 4mm BH Screw assistant, set Losi 5ive-T, TLR 5ive-B and Mini WRC

Genuine Losi spare/option part. Part is delivered in silver or black color from vendor!Contents:1 set

€8.99*

Details

LOSB 6450 Wheel Screw Set, for 5ive-T and Mini

Genuine Losi spare/option part. Fits Losi 5ive-T and 5ive Mini.Part is delivered in silver or black color from vendor!Dimensions:3 x 10mm

€8.99*

LOSB 8104/01 Body right Fender and Plate black 5T

Item N° LOSB 8104/01Body right Fender and Plate black 5TReady for installation with factory applied decals!

€59.99*

Customers also viewed

Hitec Servo HS-1100WP Waterproof IP67

Genuine Hitec spare/option part.Waterproof Power IP67 for large models and many industrial applicationsServo HS-1100WP is the most powerful and 100% waterproof servo Hitec large assortment! Thus, it is ideally suited for industrial applications and also for XXL large-scale models. Equipped with a hand-brush motor for maximum reliability and durability, and which protects from the full milled aluminum housing perfectly against electromagnetic interference. Another special course (not programmable) to call the virtually indestructible steel gears and a digital servo electronics IP67 classification.The Servo HITEC HS-1005SGT delivers maximum and constant performance and with its data also a favorite for industrial applications such as UAV, robotics and special effects. Technical data:Width: 33 mm Height: 73 mm Length: 64 mm Weight: 0340 kg Power Type: Mega Features: operating voltageFrom 11.1 to 14.8 volts, Amendment leads possible (Optional) Engine type servos: brushed Transmission: steel Operating voltage in V: 11.1 to 14.8 volts Actuating time s / 60 ° at 11.1 volts: 0:26 Setting time s / 60 ° at 14.8 volts: 12:19 Torque in kg cm at 6.0 volts: 84 Torque in kg cm at 7.4 volts: 110 Teeth: Mega Ball bearings: Yes, 2 times MR148 Waterproof: Yes Flight recommendation: YES Recommendation Heli: YES Recommendation Car: YES Recommendation boat: YES Temperature range: -20 ° to 60 ° CFeatures:Highest force Enormous holding power Indirect long-life potentiometer, 1 million cycles Steel gears Bearings, 2-MR148 Aluminum housing Separate signal and power supplyContents:1 piece

€639.90*

500304032/ED Carson 1:5 Wild GP Drift Attack Brushless 2.4GHz RTR, 160A / 700kV / up to 8S

Carson Drift Attack special equipment with 65 mm wide front and rear tires!The Carson Wild E Attack is basically the same as the GP version, but instead of the gas engine, a brushless drive unit provides propulsion. In addition to the other motorization, a different receiver box which also carries the drive battery well protected is used.The car comes with completely installed Carson 2.4 GHz remote control, incl. transmitter alkalines, brushless motor with ESC and 35 kg steering servo, as well as a tool set.Motor and esc both allow the use of batteries up to 8S. However, we recommend 6S, as there is a very good compromise between driving performance and run time. One should not forget that the motors performance with 6S is already significantly higher than that of the gas-powered version and that much power needs to be mastered in a comparatively lightweight 2WD car. Motorization Spektrum 160A ESC 56112/700 TT Monster Brushless Motor 700kV Technical details: Up to 80 km/h depending on the battery Differential with steel gears Drift equipment F+H 65 mm wide Aluminium shocks, dust protected Bead-lock rims with off-road tires Aluminium wheel hex drives Ajustable rear wing Completely ballraced 2WD drivetrain Water protected receiver box Aluminium chassis Driving batteries and a charger are still required for driving

€979.90* €1,122.00* (12.66% saved)

Configure now

T1257 FG Universal Charger with many adaptor cables

Genuine FG spare/option part. Practical 220V charger, specially designed for RC cars. The TX/PACK CHARGER 2 enables the charging of a 7.2V drive battery or the transmitter battery.Two outputs: 11.6 V 180 mA (transmitter charging plug) and 7.2 V 180 mA (drive battery with Tamiya plug). Only use one output at a time!Contents:1 piece

€27.90*

F002 Charger for HPI / Carson receiver battery

Genuine spare/option part. Contents:1 piece

€24.90*

T1244 T2M Wizard Duo 200 Charger

Genuine T2M spare/option part. Microprocessor controlled charge/discharge function - Input voltage 11 to 18 V DCFor batteries of outdoor or indoor modelsIntegrated fanBattery types and cell counts: Ni-Cd/NI-MH 1-18 cells (Delta Peak) or Li-Ion/Li-Po/LiFe 1S - 6S and lead batteries from 2 to 20V.Adjustable charging current from 0.1 to 10A with 100mA increments (200W/output). Adjustable discharge current from 100mA to 5A (100 mA increments).Automatic trickle charge current from 0mA to 250 mA. Adjustable discharge cut-off voltage (increments of 0.1V).Constant charging current and charging voltage (Li-Ion, LiPo, LiFe and Pb).Charge/discharge cycle mode (discharge and charge/charge and discharge). 5 total cycles.1 backlit LCD display with two lines of 16 characters each.Protective devices against incorrect input voltage, faulty connections and reverse connections.2 integrated balancers are used to maintain and protect your lithium batteries (Li-Po, Li-Ion and LiFe) during the charging process with a tolerance of 5mV (during charging or discharging)Balancer current max. 250 mA.2 ports for temperature sensor (not included)XH balancer connector.Dimensions: 20 x 17.5 x 7.3 cm Weight: 880g.Contents:1 piece

€139.90*