6557 FG LiPo charger Wizard Box
Product number:
fg_6557
EAN:
3410569718198
Product information "6557 FG LiPo charger Wizard Box"
Genuine FG spare/option part.
Recommended for batteries with at least 200 mAh capacity.
The charger is suitable for LiPo batteries from 2S to 4S (7.4 to 14.8 volt), connected via balancer port. The port has JST XH connector. Maximum charging current: 4 A, maximum charging output: 50 W.
Charging current will be adjusted automatically. Removable mains cord (230 volt) is included.
Content:
Recommended for batteries with at least 200 mAh capacity.
The charger is suitable for LiPo batteries from 2S to 4S (7.4 to 14.8 volt), connected via balancer port. The port has JST XH connector. Maximum charging current: 4 A, maximum charging output: 50 W.
Charging current will be adjusted automatically. Removable mains cord (230 volt) is included.
Content:
- 1 piece
Login
Customers also bought
GPM air filter cover which fits easily over your existing air filter. A fastening band band at the bottom holds the cover in place. Maintenance of the main filter will be significantly reduced, especially in very dusty environments.
The pump will fill and empty the fuel tank within seconds.The pump has a vent valve to avoid overpressure. Do not store gasoline for longer than 60 minutes in the gun.Occasionally lubricate the rubber seal of the piston with some grease. To do this, the handle-side cap of the cylinder can be unscrewed and the pump can be disassembled.The clear hose has been blackened in the picture for presentation purpose only.Color: blue.Filling capacity:500 mlContent:1 piece
Genuine Atop spare/option part. Two pieces CNC-machined 6061-T6 aluminum spring perches for Losi DBXL. Direct replacement for the stock part (from set. # LOS 253006).Content:2 pieces
BIG DIGGER 170x80 and 170x60 with black MadMax Extreme rims with 20 beadlock screws, with 24 mm hex socket and reinforced orange beadlock rings for Losi 5ive-T and Desert Buggy XL as well as all HPI Baja 5 cars.The MadMax tires had 84 extremely strong tread blocks on the front tires and 96 on the rears, with more than 1 cm² cross-section and 6 mm tread depth, allow for best power transfer and provide excellent grip even on loose surfaces like sand or soil. Due to the extreme load created by the MadMax BIG DIGGER tires the rim was optimized again with a reinforcement ring.The tires are fitted with a special rigid insert, which can handle the cornering forces and maintain the tires shape even on heavy cars like the Losi 5ive-T.We recommend to check the beadlock screws after the run. Dimensions:Outside diameter: 170 mmFront tire width: 60 mmRear tire width: 80 mmReinforced 24 mm hex wheel drive The video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!
Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum chassis braces, for Losi DBXL 2.0.Compared to the stock plastic parts (from sets # LOS251115 and LOS251116) the higher strength of the aluminum parts noticeably increases the chassis rigidity.Contents:1 piece
Similar products
HTRC charger with extremely easy 1-button operation. It charges the battery types commonly used in car modeling with mains or DC voltage supply. Infinitely adjustable charging current, automatic shut-off and balancer ports for 1S - 6S batteries are built in.Output via 4 mm sockets to accept all charging cables with 4 mm banana plugs! Specifications: AC input voltage: 100 - 240V DC input voltage: 10 - 18V Charging Power: 50W Charge Current Range: 0.1 - 5 A Max balancer current: 300mA / cell LiPo / LiFe cell count: 1 - 6 cells NiCd / NiMH battery cell count: 1 - 15 cells Size: 145 x 80 x 44 mm Weight: 170 g Content: 1 x HTRC H6AC/DC charger 1 x T- connector charging cable 1 each adapters T-connector to BEC / Futaba / JR / alligator clips 1 x Mains cable 1 x DC input cable 1 x Instruction manual
Genuine FG spare/option part. Practical 220V charger, specially designed for RC cars. The TX/PACK CHARGER 2 enables the charging of a 7.2V drive battery or the transmitter battery.Two outputs: 11.6 V 180 mA (transmitter charging plug) and 7.2 V 180 mA (drive battery with Tamiya plug). Only use one output at a time!Contents:1 piece
Genuine Carson spare/option part. The Carson Expert Charger LiPo Compact 3A is a balancing quick charger for 2-, 3- and 4-cell LiPo batteries. Thanks to its excellent price/performance ratio it is ideal for beginners and on the road as a second mobile device. Four LEDs indicate operating and charging status.Technical details: Quick Charger For all 7.4 / 11.1 and 14.8 V LiPo batteries (2S / 3S / 4S) Gentle loading due to the balancer function Charge current 3000 mA Balancer connector system XHPContents:1 piece
Genuine HT spare/option part.Version V2 with new design and quieter fans.Designed by professionals, this system is extremely versatile. The HT206AC / DC Duo 2 is very easy to use with the vertically angled 4.3" color touch display. The colorful app icons allow quick and clear navigation through the menu. The charger is cooled by a total of three powerful fans, which prevent overheating even at high outside temperatures. The heat dissipation is also increased by the aluminum housing.It is possible to charge two different batteries simultaneously with different charging settings. The HT206AC / DC Duo 2 provides a total of 400 watts, 200 watts per channel. Thus, each battery can be charged or discharged individually. The battery life can be increased with the balancing function.Specifications: AC input voltage: 110 - 240VDC input voltage: 10 - 30VDC output power: 5 - 27V, 0.1 - 20ACharging Power: 2 x 200W (400W) Charge Current Range: 0.1 - 20 A x 2Discharge current range: 0.1 - 5 A x 2 Max Discharge power: 25W x2 (50W) balancer current: 500mA / cellLilon / LiPo / LiFe / LiHV cell count: 1 - 6 cellsNiCd / NiMH battery cell count: 1 - 15 cellsPb Battery voltage: 2 - 20VMax. USB output: 5V / 2ABattery Memory: 8 profilesSub-function: digital power, balancer, IR testFirmware upgrade: External mini USB deviceSize: 195 x 143 x 70 mmWeight: 1072g Content: b> 1 x HTRC HT206AC / DC DUO charger 2 x T60 on banana connector adapter 2 x Balancing Board1 x Mains cable li> 1 x Instruction manual
The charger was replaced due to small scratches on the display. It was checked in our workshop. Here are the technical data:The little brother of the HT206AC/DC Duo. The T240 Duo AC/DC is very easy to use with the vertically angled 3,2" color touch display. The colorful app icons allow quick and clear navigation through the menu. The charger is cooled by a temperature controlled fan, which prevent overheating even at high outside temperatures.It is possible to charge two different batteries simultaneously with different charging settings. The T240 Duo AC/DC provides 2x 75 watt on AC, powered by a suitable external power supply 2x 120 watt are possible. Thus, each battery can be charged or discharged individually. The battery life can be increased with the balancing function.Output via 4 mm sockets to accept all charging cables with 4 mm banana plugs!Specifications:AC input voltage: 100 - 240VDC input voltage: 10 - 18VCharging Power: 2 x 120W (240W)Charge Current Range: 0.1 - 10 A x 2Discharge current range: 0.1 - 2 A x 2Discharge power: 10 W x2 (20 W)Max balancer current: 500mA / cellLilon / LiPo / LiFe / LiHV cell count: 1 - 6 cellsNiCd / NiMH battery cell count: 1 - 15 cellsPb Battery voltage: 2 - 20VBattery Memory: 6 profilesSize: 145 x 105 x 64 mmWeight: 480gContent:1 x HTRC T240 Duo AC/DC charger2 x T- connector charging cable2 each adapters T-connector to Tamiya / XT60 / alligator clips2 x Balancing Board1 x Mains cable1 x DC input cable1 x Instruction manual
Genuine Dynamite spare/option part. specifications:Input voltage 100...240 V~Suitable for charging of 2S and 3S LiPo batteriesCharging current 2 ABalancer connector: JST-XHSize (LxWxH): 104 x 64 x 34 mmScope of delivery:ChargerDetachable AC cord with standardized European plug
Genuine T2M spare/option part. Microprocessor controlled charge/discharge function - Input voltage 11 to 18 V DCFor batteries of outdoor or indoor modelsIntegrated fanBattery types and cell counts: Ni-Cd/NI-MH 1-18 cells (Delta Peak) or Li-Ion/Li-Po/LiFe 1S - 6S and lead batteries from 2 to 20V.Adjustable charging current from 0.1 to 10A with 100mA increments (200W/output). Adjustable discharge current from 100mA to 5A (100 mA increments).Automatic trickle charge current from 0mA to 250 mA. Adjustable discharge cut-off voltage (increments of 0.1V).Constant charging current and charging voltage (Li-Ion, LiPo, LiFe and Pb).Charge/discharge cycle mode (discharge and charge/charge and discharge). 5 total cycles.1 backlit LCD display with two lines of 16 characters each.Protective devices against incorrect input voltage, faulty connections and reverse connections.2 integrated balancers are used to maintain and protect your lithium batteries (Li-Po, Li-Ion and LiFe) during the charging process with a tolerance of 5mV (during charging or discharging)Balancer current max. 250 mA.2 ports for temperature sensor (not included)XH balancer connector.Dimensions: 20 x 17.5 x 7.3 cm Weight: 880g.Contents:1 piece
Charger for various Futaba transmitter and receiver batteries Input voltage: 100-240 V Charging (battery type): NiMH, Tx/Rx Charging cable supplied: Futaba TX output: 6V/170mA RX output: 6V/100mA
1 piece
Customers also viewed
Genuine Carson spare/option part. The Carson Expert Charger LiPo Compact 3A is a balancing quick charger for 2-, 3- and 4-cell LiPo batteries. Thanks to its excellent price/performance ratio it is ideal for beginners and on the road as a second mobile device. Four LEDs indicate operating and charging status.Technical details: Quick Charger For all 7.4 / 11.1 and 14.8 V LiPo batteries (2S / 3S / 4S) Gentle loading due to the balancer function Charge current 3000 mA Balancer connector system XHPContents:1 piece
Genuine Spektrum spare/option part. When using the Spektrum XBC100 Smart Battery Checker with a Spektrum Smart battery, you will be able to see and adjust many of the settings only available with a Spektrum Smart charger. This includes one connection for balance and battery level checking, and providing records like number of cycles, internal battery temperature and exception reports. You can even adjust Smart battery settings right from the XBC100.The XBC100 also features a Qualcomm 3.0 USB charge port, giving you an easy way to keep your mobile device and Spektrum Smart Transmitters charged when USB power ports are scarce. Better yet, the XBC100 gives you the ability to better setup and test your models with the built in servo tester! Center and test your servo endpoints easily with the integrated PWM output port.Finally, all of this is displayed on a full color IPS LCD screen that is designed to be easy to read in direct sunlight and is accessed via a user friendly touch interface. Key Features Battery checker with built in cell balancing Advanced Servo testing feature helps with model setup Spektrum Smart battery technology allows users to take advantage of Smart Battery features Easy to read full color display Qualcomm 3.0 compatible USB power port with Quick Charge for compatible Android and IOS devices (up to 12v and 2 amps) Update port for easy access to updates and new features More than a Balance CheckerPilots and Drivers can stay better informed about their Lipo, LiHv, LiFe and LiIon Batteries with the Spektrum XBC100 Smart Battery Checker. With the Easy to read full color IPS LCD display, quickly see the battery percentage, cell balance, and be notified of abnormal conditions. And if your battery cells are out of balance, the XBC100 can conveniently balance each of your Battery cells to within ±0.005V accuracy. Smart Battery ConnectivityThe XBC100 gives Smart Battery users a simple to use battery checker that gives all the benefits of a balance checker with just one connection of the iC3 connector. And when connected to a Smart Battery, users can check all the integrated parameters such as number of cycles, events such as over discharge and overheating, as well as adjust smart battery settings like auto storage timer and preset charge current. Integrated Servo TesterBuilt in to the XBC100 Smart Battery Checker is a helpful pwm out port that is facilitated to be used as a Servo tester. Easily check your control ranges on any modern servo or esc. Users can Test for binding and current draw right from the checker, no special in line meter required. Qualcomm ® 3.0 USB Charge PortKeep your device charged and ready with the convenient USB power port. Just plug in a charged battery and hit start USB Charging and the XBC100 becomes a fast charging power bank ready to keep your Spektrum Smart Transmitter and mobile devices charged. Support Qualcomm QC 2.0/3.0， compatible with BC1.2 and Apple devices. Maximum output 12V/2A. Contents:1 piece
GPM air filter cover which fits easily over your existing air filter. A fastening band band at the bottom holds the cover in place. Maintenance of the main filter will be significantly reduced, especially in very dusty environments.
Genuine HT spare/option part.Version V2 with new design and quieter fans.Designed by professionals, this system is extremely versatile. The HT206AC / DC Duo 2 is very easy to use with the vertically angled 4.3" color touch display. The colorful app icons allow quick and clear navigation through the menu. The charger is cooled by a total of three powerful fans, which prevent overheating even at high outside temperatures. The heat dissipation is also increased by the aluminum housing.It is possible to charge two different batteries simultaneously with different charging settings. The HT206AC / DC Duo 2 provides a total of 400 watts, 200 watts per channel. Thus, each battery can be charged or discharged individually. The battery life can be increased with the balancing function.Specifications: AC input voltage: 110 - 240VDC input voltage: 10 - 30VDC output power: 5 - 27V, 0.1 - 20ACharging Power: 2 x 200W (400W) Charge Current Range: 0.1 - 20 A x 2Discharge current range: 0.1 - 5 A x 2 Max Discharge power: 25W x2 (50W) balancer current: 500mA / cellLilon / LiPo / LiFe / LiHV cell count: 1 - 6 cellsNiCd / NiMH battery cell count: 1 - 15 cellsPb Battery voltage: 2 - 20VMax. USB output: 5V / 2ABattery Memory: 8 profilesSub-function: digital power, balancer, IR testFirmware upgrade: External mini USB deviceSize: 195 x 143 x 70 mmWeight: 1072g Content: b> 1 x HTRC HT206AC / DC DUO charger 2 x T60 on banana connector adapter 2 x Balancing Board1 x Mains cable li> 1 x Instruction manual
Genuine HPI spare/option part. Dimensions: 6 x 10 x 3 mm.Content:10 pieces
mielke_5100 Manifold:
5102 with Steel Manifold+ 20EUR
Genuine Mielke spare/option part. Complete exhaust system for Carson Wild GP Attack, HPI Baja 5B and 5T, with steel manifold and mounting hardware included.The pipe is mounted well protected bythe chassis. The lightweight pipe keeps the c.o.g. low.Contents:1 Set
Variants from €169.90*