500606068 Carson Expert Charger LiPo Compact 3A
Product number:
cs_500606068
EAN:
4058575105831
Product information "500606068 Carson Expert Charger LiPo Compact 3A"
Genuine Carson spare/option part.
The Carson Expert Charger LiPo Compact 3A is a balancing quick charger for 2-, 3- and 4-cell LiPo batteries. Thanks to its excellent price/performance ratio it is ideal for beginners and on the road as a second mobile device. Four LEDs indicate operating and charging status.
Technical details:
Quick Charger
For all 7.4 / 11.1 and 14.8 V LiPo batteries (2S / 3S / 4S)
Gentle loading due to the balancer function
Charge current 3000 mA
Balancer connector system XHP
Contents:
The Carson Expert Charger LiPo Compact 3A is a balancing quick charger for 2-, 3- and 4-cell LiPo batteries. Thanks to its excellent price/performance ratio it is ideal for beginners and on the road as a second mobile device. Four LEDs indicate operating and charging status.
Technical details:
Quick Charger
For all 7.4 / 11.1 and 14.8 V LiPo batteries (2S / 3S / 4S)
Gentle loading due to the balancer function
Charge current 3000 mA
Balancer connector system XHP
Contents:
- 1 piece
Login
Customers also viewed
Genuine FG spare/option part. Practical 220V charger, specially designed for RC cars. The TX/PACK CHARGER 2 enables the charging of a 7.2V drive battery or the transmitter battery.Two outputs: 11.6 V 180 mA (transmitter charging plug) and 7.2 V 180 mA (drive battery with Tamiya plug). Only use one output at a time!Contents:1 piece
Genuine FG spare/option part.Recommended for batteries with at least 200 mAh capacity.The charger is suitable for LiPo batteries from 2S to 4S (7.4 to 14.8 volt), connected via balancer port. The port has JST XH connector. Maximum charging current: 4 A, maximum charging output: 50 W.Charging current will be adjusted automatically. Removable mains cord (230 volt) is included.Content:1 piece
Genuine HT spare/option part. Smartech/Carson Monster/Pick-Up Truck to Mega-Beetle body mount conversion kitThe 8.5 x 1.0 mm female thread perfectly fits the usual stock 8 mm body mounts non-cutting. The thread depth of about 22 mm allows for about 10 - 15 mm of body position adjustment!Content of this set:4 pieces of side body mount (FG 6185)2 pieces of aluminum body mount extension (y1452)8 pieces of body clip (y6013)The body mounts are to be installed as shown in the pictures.
This pair of Tyres have the following use indications: GOOD GRIP situation for clean track. GOOD GRIP situation for medium asphalt. GOOD GRIP situation for medium temperatures. This pair of Tyres have the following technical features: REVO treated profile for the maximum traction and the maximum lateral grip. Treated profile studied to maintain the tyre surface alway clean from rubber murble. Compound exclusively developped for model tyres. Inside belt flexible but very strong, vulcanized directly together with tyre compound. Insert foam with special material for high temperatures, for maximum stability and high drive precision. Spoked wheel moulded with special material for high temperatures for maximum grip and stability. Special gluing system 100% guaranteed.The main sizes for this tyre are: WHEEL fixing with square 18mm. TYRE outside diameter 118mm. WHEEL inside diameter 90mm. TYRE tota width 65mm. Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!
‘NEW 2025’ FG Short Cross Elekto 2WD model with RTR. Pro trucks or short course are becoming increasingly popular in the world of motor racing. They are monstrous, powerful cars with long suspension travel that make spectacular group races possible. The ‘Short Cross’ has reliable mechanics that are fitted with stiffeners and protective flaps. There is also a conversion kit with which you can convert your Short Cross 2WD into a 4WD. A highly detailed polycarbonate body fits perfectly to the chassis. The RTR version is also equipped with a servo and 2.4 GHz transmitter. Our battery recommendation - use 2 3S Li-Po batteries.Technical data: - Motor 1100 KV, 3600 W up to 6S - 160A ESC/controller - 4 mm anodised chassis with side protection - Differential with bevel gears - Completely mounted on ball bearings - Big Bore aluminium shock absorbers - Front and rear double wishbones adjustable in caster/toe-in/camber - New short course tyres and high-sided rims in M and S hardness. - Matt-black painted and finished bodyFor completion you need : - Batteries, - charger Dimensions and weight: - Length 770 mm - Width 480 mm - Height 320 mm - Wheelbase 485 mm - Weight approx. 9 kg1 pieces
Genuine Carson spare/option part.- Diameter 155 mm - Width 60 mm Knobbly tyre glued on black rim with 18 mm square. Contents:2 pieces
Great duo charger for hobby use. • Dual power supply (AC/DC) Input voltage AC: 100 ~ 240V • Input voltage DC: 11 ~ 18V max • Output power 80W (maximum charge) 5W (discharge) • Charging current 0.1 ~ 7.0 A • Discharge current 0.1 ~ 1.0 A • Balancer current for Li-Po 300 mAh • Number of cells Ni-Cd/NI-MH 1 to 15 cells • Number of cells Li-XX 1 to 6S • Voltage lead battery 2 to 20V • Weight 869 g • Dimensions 98 mm x 145 mm x 195 mm • Included: Balancer plate (2x) • Cable: JST/BEC - Crocodile clips-XT60 • Rec. - Tamiya - Dean 1 piece