Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

T1257 FG Universal Charger with many adaptor cables

Product information "T1257 FG Universal Charger with many adaptor cables"

Genuine FG spare/option part.

Practical 220V charger, specially designed for RC cars. The TX/PACK CHARGER 2 enables the charging of a 7.2V drive battery or the transmitter battery.

Two outputs: 11.6 V 180 mA (transmitter charging plug) and 7.2 V 180 mA (drive battery with Tamiya plug). Only use one output at a time!

Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

6546/02 FG receiver battery Ni-MH 6V 3600mAh
Genuine FG spare/option part.Measures:Width: 111 mmHeight: 47 mmDepth: 23 mmContents:1 piece

€37.50*

Average rating of 0 out of 5 stars

6180 FG Roll bar for Big Foot
Genuine FG spare/option part.This roll bar is just for looks, not for protection. It consists of aluminum tubes and plastic corner joints.Fits monster truck body shells.Dimensions double loop:Height: approx. 100 mmWide: approx. 230 mmDimensions kickers section:Length: approx. 190 mmWidth: approx. 120 mmContents:1 set

€29.30*

Average rating of 0 out of 5 stars

5436 FG Additional headlights
Genuine FG spare/option part.All-purpose additional headlights.Measures:Outer diameter: 25 mmDepth: 27 mmContents:2 pieces

€19.90*

Average rating of 0 out of 5 stars

6236 FG Body detailing kit for Monster-Truck - set
For a scale body shell appearance.

€15.90*

Average rating of 0 out of 5 stars

6195 FG Vehicle decals for Stadium + Monster-Truck, set
Genuine FG spare/option part.Dimensions:Sheet 1: 525 x 345 mmSheet 2: 465 x 345 mmContents:1 set

€61.95*

Similar products

Average rating of 0 out of 5 stars

y1507 V2 HT206AC/DC Duo 2 6S professional 400W charger
Genuine HT spare/option part.Version V2 with new design and quieter fans.Designed by professionals, this system is extremely versatile. The HT206AC / DC Duo 2 is very easy to use with the vertically angled 4.3" color touch display. The colorful app icons allow quick and clear navigation through the menu. The charger is cooled by a total of three powerful fans, which prevent overheating even at high outside temperatures. The heat dissipation is also increased by the aluminum housing.It is possible to charge two different batteries simultaneously with different charging settings. The HT206AC / DC Duo 2 provides a total of 400 watts, 200 watts per channel. Thus, each battery can be charged or discharged individually. The battery life can be increased with the balancing function.Specifications: AC input voltage: 110 - 240VDC input voltage: 10 - 30VDC output power: 5 - 27V, 0.1 - 20ACharging Power: 2 x 200W (400W) Charge Current Range: 0.1 - 20 A x 2Discharge current range: 0.1 - 5 A x 2 Max Discharge power: 25W x2 (50W) balancer current: 500mA / cellLilon / LiPo / LiFe / LiHV cell count: 1 - 6 cellsNiCd / NiMH battery cell count: 1 - 15 cellsPb Battery voltage: 2 - 20VMax. USB output: 5V / 2ABattery Memory: 8 profilesSub-function: digital power, balancer, IR testFirmware upgrade: External mini USB deviceSize: 195 x 143 x 70 mmWeight: 1072g Content: b> 1 x HTRC HT206AC / DC DUO charger 2 x T60 on banana connector adapter 2 x Balancing Board1 x Mains cable li> 1 x Instruction manual

€349.90*

Average rating of 0 out of 5 stars

500606068 Carson Expert Charger LiPo Compact 3A
Genuine Carson spare/option part. The Carson Expert Charger LiPo Compact 3A is a balancing quick charger for 2-, 3- and 4-cell LiPo batteries. Thanks to its excellent price/performance ratio it is ideal for beginners and on the road as a second mobile device. Four LEDs indicate operating and charging status.Technical details: Quick Charger For all 7.4 / 11.1 and 14.8 V LiPo batteries (2S / 3S / 4S) Gentle loading due to the balancer function Charge current 3000 mA Balancer connector system XHPContents:1 piece

€29.99*

Average rating of 0 out of 5 stars

LOSB 9642 Global AC 6V Charger 5T
Genuine Losi spare/option part. Contents:1 set

€29.99*

Average rating of 0 out of 5 stars

6557 FG LiPo charger Wizard Box
Genuine FG spare/option part.Recommended for batteries with at least 200 mAh capacity.The charger is suitable for LiPo batteries from 2S to 4S (7.4 to 14.8 volt), connected via balancer port. The port has JST XH connector. Maximum charging current: 4 A, maximum charging output: 50 W.Charging current will be adjusted automatically. Removable mains cord (230 volt) is included.Content:1 piece

€52.95*

Average rating of 0 out of 5 stars

P-HBC-3C Futaba plug-in charger, 1 piece
Charger for various Futaba transmitter and receiver batteries  Input voltage: 100-240 V  Charging (battery type): NiMH, Tx/Rx  Charging cable supplied: Futaba  TX output: 6V/170mA RX output: 6V/100mA 1 piece

€39.90*

Average rating of 0 out of 5 stars

F002 Charger for HPI / Carson receiver battery
Genuine spare/option part. Contents:1 piece

€24.90*

Average rating of 0 out of 5 stars

DYNC0505W Dynamite 20W Li-Po charger 2A
Genuine Dynamite spare/option part. specifications:Input voltage 100...240 V~Suitable for charging of 2S and 3S LiPo batteriesCharging current 2 ABalancer connector: JST-XHSize (LxWxH): 104 x 64 x 34 mmScope of delivery:ChargerDetachable AC cord with standardized European plug

€32.99*

Average rating of 0 out of 5 stars

T1244 T2M Wizard Duo 200 Charger
Genuine T2M spare/option part. Microprocessor controlled charge/discharge function - Input voltage 11 to 18 V DCFor batteries of outdoor or indoor modelsIntegrated fanBattery types and cell counts: Ni-Cd/NI-MH 1-18 cells (Delta Peak) or Li-Ion/Li-Po/LiFe 1S - 6S and lead batteries from 2 to 20V.Adjustable charging current from 0.1 to 10A with 100mA increments (200W/output). Adjustable discharge current from 100mA to 5A (100 mA increments).Automatic trickle charge current from 0mA to 250 mA. Adjustable discharge cut-off voltage (increments of 0.1V).Constant charging current and charging voltage (Li-Ion, LiPo, LiFe and Pb).Charge/discharge cycle mode (discharge and charge/charge and discharge). 5 total cycles.1 backlit LCD display with two lines of 16 characters each.Protective devices against incorrect input voltage, faulty connections and reverse connections.2 integrated balancers are used to maintain and protect your lithium batteries (Li-Po, Li-Ion and LiFe) during the charging process with a tolerance of 5mV (during charging or discharging)Balancer current max. 250 mA.2 ports for temperature sensor (not included)XH balancer connector.Dimensions: 20 x 17.5 x 7.3 cm Weight: 880g.Contents:1 piece

€139.90*

Customers also viewed

Average rating of 0 out of 5 stars

y0580 Mammoth Supergrip for 1/6 and 1/5 offroad cars glued
If you want a special combination of compounds please enter that information into the "note to us" form field at the end of the checkout process.Mammoth Supergrip for 1/6 and 1/5 offroad cars. Fits too for Formular 1 models!Parking lot / race tires for your offroad car.VersionWidthOuter diameterFront64 mm153 mmRear78 mm153 mmGlued on genuine FG rims (rear tires using extension rings), with foam rubber inserts included. Rim has 18 mm square drive with reinforcement ring.Please note: based on experience we recommend against using other manufacturers rims and extensions. Since the Mammoth tires provide very good grip the rim and the bonding must withstand high loads. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.The Mammoth Supergrip is available in in the following compounds: Super softSoftMediumHardFront tirey0581y0582y0583y0584Rear tirey0591y0592y0593y0594General recommendation:The dirtier the track or the lower the ambient temperatures, the stickier (softer) the rear tires should be.Hint regarding the front tires: 2WD cars should use them one or two grades harder then the rears. 4WD cars usually like the same compound all around.Of course, the softer the tire the higher the wear rate; and this applies to Mammoth Supergrip onroad tires as well.The tires have a special onroad thread pattern but will still provide ideal traction after the pattern has been worn out. The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall.Prices per unit: FrontRearMammoth Supergrip:Pair44,90 EUR49,90 EURTire inserts:Pair13,00 EUR13,00 EURFG rim:Pair14,90 EUR14,90 EURFG extension ring:Pair--.-- EUR14,90 EURMounting:Pair13,00 EUR13,00 EURTotal Price                                                                                            85,80 EUR    105,70 EUR = 191,50 EUR SETTotal for 1 pair each front and rear: 169,90 EUR================================Also suitable for:With the following wheel adapter: y1183 Rim adapter

€119.90*

Average rating of 0 out of 5 stars

TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters
Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€47.90*

Average rating of 0 out of 5 stars

F003/2 Carson Universal On/Off Switch
Genuine Carson spare/option part. Contents:1 piece

€9.90*

Average rating of 0 out of 5 stars

7302 FG Crankshaft housing right for Zenoah ZG22
Original FG spare part

€39.90*

Average rating of 0 out of 5 stars

y0495/02 FG manuals set Competition EVO 04 German, 1 pce.
Item N° y0495/02 FG manuals set Competition EVO 04 German, 1 pce.Genuine FG manuals as included with the cars.All wheelbases, including Race Truck.

€3.90*

Average rating of 0 out of 5 stars

7071/06 FG Stabilizer 5 mm rear
Genuine FG spare/option part. Suitable for all 1:5 models, Race-Trucks and Monster models to optimize the road performance.Contents:1 piece

€17.90*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency