y0976 Alloy shock shaft end, long or short to choice
Product information "y0976 Alloy shock shaft end, long or short to choice"
y7087/01 Alloy shock shaft end short
Replaces FG 7087/01.
Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. Replaceable bushings.
Dimensions:
- Length overall: 22,5 mm, about 17 mm to to center of bushing
- Thread for shock shaft: M4
- Bushing inner diameter: 4 mm
Contents:
- 2 pieces
y7087/02 Alloy shock shaft end long
Genuine HT spare/option part.
Replaces FG 7087/02.
Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. There are replaceable bushings.
Dimensions:
- Length overall: 27 mm, about 22 mm to to center of bushing
- Thread for shock shaft: M4
- Bushing inner diameter: 4 mm
Contents:
- 2 pieces
Login
Alternatives
Alternatives
Genuine HT spare/option part. Dimensions:Inner diameter: 4 mm/li>Outer diameter: 5.5 mm/li>Width: 5 mmContents:4 pieces
Kunden haben auch gesehen
Kunden haben auch gesehen
y7092 Alloy spring retainer, smallGenuine HT spare/option part.Alloy spring retainer, replaces FG 7092 or Carson 32556.Fits all FG shocks with 16 mm body and all Carson / Smartech 2WD and many other 1/5 and 1/6 scale models. Dimensions:Retainer diameter: 23 mmAccepts springs with approx. 16 mm inner diameterSlot for 4 mm shock shaftContents:2 piecesy6092 Alloy spring retainer largeGenuine HT spare/option part.Alloy spring retainer, replaces FG 6092.Fits all FG shocks with 20 mm body (OEM shocks on all FG buggy / monster / stadium models and tuning shocks 6481 / 6482) and many other 1/5 and 1/6 scale models. Dimensions:Retainer diameter: 25 mmAccepts springs with approx. 20 mm inner diameterSlot for 4 mm shock shaftContents:2 pieces
Offerset:2 Pairs MadMax Giant Grip tires2 Pairs MadMax rims2 Pairs MadMax inlays2 Pairs / 4 pieces adapter TT1020/01GIANT GRIP 190 x 70 with black colored MadMax Extreme rims, 20-fold screwed, very tough, with 24 mm hex drive and reinforced beadlock rings for Losi 5ive-T and Desert-Buggy XL as well as all HPI Baja 5 B/T cars.The GIANT GRIP provides giant traction through 96 about one cm² wide and 5 mm high strong lugs, getting ample grip even on loose surfaces like sand and soil.Due to the extreme strain caused by the GIANT GRIP tires the MadMax rim with reinforcement ring had to be optimized once more.The set consists of four tires, including tire inserts and MadMax EXTREME rims and 4 pieces adapter wheel nuts TT1020/01.The GIANT GRIP tires come with strong special tire inserts which allow to transfer the power without canting, even on heavy cars like the Losi 5ive-T.Dimensions:Outer diameter: 190 mmTire width at bead 70 mmTread width 80 mmReinforced 24 mm hex wheel driveThe video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!TT1020 Top Tuning Adapter wheel nutGenuine TopTuning spare/option part.These adapter nuts, manufactured from billet 7075 aluminum allow for easy and precise installation of all MadMax, HPI and Losi tires and rims on the Traxxas X-Maxx. For the best result possible, nut and adapter are manufactured as a one-piece unit.It should be noted that the wide rims can be used on the rear axle only. On the front axle they would limit the steering angle by grinding on lower a-arm and steering rod.Traxxas has microencapsulated the wheel shafts of the X-Maxx to secure the wheel nuts. Like any thread locking compound this is not for eternity. After several tire changes the use of a normal screw locking compound is advised, we recommend it "y0113 / 01 medium strength".The dimensions of the nut are specifically designed for use with MadMax, current HPI and Losi rims. Rims from Losi 5ive have slightly different dimensions in the hub area. This is meaningless on the large LOSI or HPI wheel adapters. With the smaller and shorter wheel nut thread of the X-Maxx wheel shafts you cannot compromise. Therefore there are also special nuts for the Losi rims/wheels available at our options menu.However, somewhere in the past, the injection moulds for the HPI rims were slightly modified in the hub area. As part of that job the bore diameter has probably been slightly increased. Therefore, the use of older rims in combination with the adapter nuts makes it necessary to increase the rim bore a little bit.Due to repeated requests for use: these wheel nuts replace the stock wheel nuts when installing the wheels!Contents:4 pieces
Genuine Carson spare/option part. Contents:2 pieces / 1 pair
These welded steel bars are bolt-on without drilling required, and protect your buggy's side and rear tires from damage. Some minor modifications to the body shell are recommended to clear the bars, but are not absolutely necessary.All mounting bolts included.
Genuine FG spare/option part. Dimensions:Length: 65 mmThread length: approx. 12 mmLength from thread to clip: approx. 47 mmSpace between clips: approx. 4 mmDiameter: 8 mmContents:1 piece
