67336 FG Shock absorver protect le./ri. Leopard 2WD/4WD

€8.30*

Prices incl. VAT plus shipping costs

Available

Product number: fg_67336

EAN: 3410564537459

Product information "67336 FG Shock absorver protect le./ri. Leopard 2WD/4WD"

Genuine FG spare/option part.

Spare part for the Leopard 2WD/4WD 2010 version

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Alternatives

67336/01 FG Shock absorver protect le./ri., red, 2pcs.

Item N° 67336/01Shock absorver protect le./ri., red, 2pcs.Spare part for Sportsline Leopard 4WD.

€8.30*

Similar products

y7087/12 Replacement bushings for alloy shock shaft end

Genuine HT spare/option part. Dimensions:Inner diameter: 4 mm/li>Outer diameter: 5.5 mm/li>Width: 5 mmContents:4 pieces

€3.90*

TT0198 Top Tuning Bubble-Ex for 1/10 up to 1/5 scale rc-cars

Genuine Top Tuning spare/option part. Indispensable for optimal suspension tuning!Vacuum container for removal of bubbles from shock fluid when filling shocks.A vacuum pump is built into the lid. The tray has four holes each to accept 1/10, 1/8, 1/6 and 1/5 scale shocks.Suitable for shock absorbers from Losi, Mecatech, BWS, Arrma, Traxxas, FG, Carson, HPI and many more, as long as they have a suitable diameter. All shocks from 15 to 32 mm outer diameter can be used in the Bubble Ex to be "de-bubbled". Tray bore sizes: No. 1 = 32 mm diameter No. 2 = 21 mm diameter No. 3 = 17.5 mm diameter No. 4 = 15 mm diameter The maximum length of the shock absorber up to the upper edge of the body is about 150 mm, whereby longer shock absorbers can also be partially compressed for insertion. (e.g Losi 5ive-T and many more)Operation:Unlock the vacuum pump by turning it slightly to the left, the pump handle then extends a little. The small plug with handle is used to close and ventilate the container. To build up the vacuum, the plug must be in the down position.The small membrane on the opposite side serves as an indicator for whether a vacuum is present. Only when this is curved outwards the lid of the container can be opened again without any effort. Content: Can with integrated vacuum pump Shock tray

€49.90* €69.90* (28.61% saved)

y0514 GPM Shock-Cover for FG, Carson, Smartech, Conrad, set.

These protective covers prevent the shock piston rods and seals for wear caused by dirt. They fit most 1/6 and 1/5 scale shocks.Not suitable for Gas Devil, Thunderbolt, Helldevil, CRT 4x4!- total length 150 mm for all FG / Carson / Smartech / Conrad and all dampers with a diameter from 22 to 30 mm. Set of 4

€14.90*

y0041 Aluminum spring perches for Losi 5ive-T/2.0/B and Mini shocks

Genuine HT spare/option part.Aluminum spring perches for Losi 5ive-T/B and Mini shocks; with slot for fast and easy change of shock springs. Direct replacement for the stock plastic part.Contents:2 pieces

From €19.90*

Details

y1335/01 Replacement clips for Suspension limiter Set

Genuine HT spare/option part. Replacement clips for Suspension limiter no.: Clips with 1,5 mm, 2 mm und 3 mm size included in the set. The clips fit shock shafts up to 4.5 mm diameter. Suitable for the following shock : y1137 GPM - Spezial Cross shocks (all versions) 2011 Mecatech Big Bore Shocks y1193 Mecatech Klick-Shocks, externally adjustable FG 6083/6084 shocks front / rear 66291/66292/66293 alloy shocks 08 67320/67330 alloy shocks for Leopard 2WD/4WD 7202/7203/7204 alloy shocks 04 305029/305030 shocks Comanche / Attack Evo 32488 Carson 1/5 front shocks 32574 Carson 1/5 rear shocks Cad shocks (all versions ) Package includes:6 clips 1.5 mm thick 6 clips 2 mm thick6 clips 3 mm thick

€8.20*

y0243 Tension adjustment clips

Genuine HT spare/option part. For easy, precise and equal adjustment of spring tension, fits all 1/5 and 1/6 shocks with a body diameter of 15 - 16 mm.Set with two clips each of 1, 2, 3, 4, 5 und 6 mm thickness.Contents:1 set

€3.95*

y0264 C-clips with handle 4 - 6 mm

clipse_griff Size: y0264/06 - 6 mm

Genuine HT spare/option part.Quick change clips for installation and de-installation without tools, galvanic zinc plated.Spring steel, hardened and tempered to 1450 to 1600 N/mm² tensile strength.Available for 4, 5 and 6 mm shafts.Contents:10 pieces

€4.90*

6484/01 FG O-ring for alloy shock absorber piston 14,8 mm

Genuine FG spare/option part. Suitable for 6484.Dimensions:12 x 1 mmContents:5 pieces

€3.10*

6484 FG Alloy shock absorber piston 14,8 mm

Genuine FG spare/option part. The exact rate of oil flow is determined by 5 borings. An o-ring reduces the friction between damper piston and damper housing.The five-unit Alloy shock absorber piston suitable for 6083, 6084, 6481 and 6482. For use with threaded shock shafts only!Dimensions:Thickness: 5 mmBore for shock schaft: 3 mmContents:2 pieces

€16.30*

y18005 HT-shock absorber quick mounts for Monster-Truck 2WD

Genuine HT spare/option part. Shock absorber quick mounts, for shock mounts and shock tower above. Sold in pairs. Contents:2 pieces

€19.90*

y1246, Hobbythek/GPM Dirt-Cover line for FG, Carson/Smartech and Conrad cars, set

Regular price: 51,80 EURhe set is suitable for all FG models + Carson/Smartech/Reely (not for FG Leopard + Carson Gas Devil, Hell Devil, CRT 4x4, Smartech Thunderbolt), please use order no. y1247.Content of delivery:- y0514 GPM Shock-Cover für FG, Carson, Smartech, Conrad- GPM Air filter cover, no. BJAFCO- GPM Starter cover, no. BJPSCO y0514 GPM Shock-Cover für FG, Carson, Smartech, ConradThese protective covers prevent the shock piston rods and seals from wear caused by dirt. They fit most 1/6 and 1/5 scale shocks. Not for Gas Devil, Thunderbolt, Helldevil, CRT 4x4!- total length 150 mm for all FG / Carson / Smartech / Conrad and all shocks with a spring diameter from 22 to 30 mm.Set of 4GPM Air filter cover, no. BJAFCOGPM air filter cover which fits easily over your existing air filter. A rubber band at the bottom holds the cover in place. Maintenance of the main filter will be significantly reduced, especially in very dusty environments. Fits all common filters, foam or fabric (K&N) style.GPM Starter cover, no. BJPSCO Keeps cool air coming to your engine by keeping dirt and grass from clogging up the pull starter area. Easily wipe off anything not deflected away. Installs on the starter cover with hook & loop tape. With metal cable management.When using the FG monster / stadium model is cut an additional hole for the support of the lateral support plate.

€39.50*

7205/07 FG Aluminum spring plate small 16mm

Genuine FG spare/option part. Dimensionally stable aluminium spring plate for all FG shock absorbers with a 16 mm housing. Replaces Item no. 07092, for damper springs with an inner diameter of 16mm, with a 4mm groove for the piston rod.Contents:2 pieces

€19.70*

This product is currently not available.

Customers also viewed

6103/07 FG Alloy steering lever with stopper for 1:6

Genuine FG spare/option part. Spare part for 6103/05.Contents:1 set

€29.00*

y0807 MD-Sil RTV silicone sealer

Genuine MD spare/option part. The red version with a temperature resistant up to 300°C. Directions for use:Clean the surfaces with a cleaner. Apply MD-Sil on one side and press the parts together. Touch-dry in 10 - 20 minutes. Curing speed 3 mm/24 hours. Contents:1 piece / 80 ml

Content: 80 Milliliter (€211.25* / 1000 Milliliter)

€16.90*

Walbro carburetor WT603B / WT990 / WT813A / WT1107 / WT1048 / WT668C

7355/08 FG Carburetor type: Walbro WT603BStandard carburetor for Zenoah G230/260. Carb has integrated choke. Typ: Walbro WT603BHowever, we recommend using the WT668C instead of the WT603B.This also has a choke, but the manufacturing quality of the WT668C is better than the WT603B!Optional ball bearing of the throttle shaft can be selected from the shops menu.y1483 Walbro WT-1048 Racing carburetorPopular performance carburetor without choke; with 13.5 mm venturi diameter, especially suitable for large-displacement engines like the Zenoah G320.The stock throttle shaft has been replaced with the proper version required for car applications; including the throttle lever as well.All existing throttle linkages can therefore be connected as usual without modifications.This carburetor does not feature a primer bulb nor a connection for a return line. It is therefore only connected to the supply line from the tank, the return line of the tank has to be closed.Optional ball bearing of the throttle shaft can be selected from the shops menu.y1067 Walbro WT668C carburetorThe Walbro WT668C carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc.The Walbro WT668C features an integrated choke with lever and a throttle shaft linkage lever. Optional ball bearing of the throttle shaft can be selected from the shops menu.Alternative: Walbro 603B also with chokey0251 Performance carburetor with accelerator pump type: WT-813AWalbro WT-813A carb with accelerator pump, improves low end response when the engine is tuned for maximum performance. 15.88mm bore, 12.7mm venturi. Ready for installation with modified shaft already installed. Fits Zenoah G230/240/260/270 engines and their CY/HPI Fuelie clones as well. Optional ball bearing of the throttle shaft can be selected from the shops menu.7855 FG Carburetor type: Walbro WT990Standard carburetor for Zenoah G240, G270 and G290. Typ: Walbro WT990 Optional ball bearing of the throttle shaft can be selected from the shops menu.y1016/051 Carburetor WT1107 G320RCGenuine Zenoah spare/option part. Standard part fits Zenoah G320RC.Optional ball bearing of the throttle shaft can be selected from the shops menu.

€59.90* €79.90* (25.03% saved)

Configure now

RC - Paint Lexan special colors, spraycan (Offer) Buy 3 get 4

Genuine HT spare/option part.RC - Paint is a special paint for lacquering RC-Car Lexan (Polycarbonate) body shells. The ultra-fine mist provides optimal coverage! Through an optimized atomizer valve an outstanding painting result is guaranteed. The content of the can is 150ml and suffices - depending on the intensity of the painting, - for one 1/8 or two 1/10 body shells. Two to three cans are needed for a 1/5 or 1/6 body shell.RC-Paint Lexan color is produced in a particularly environmentally friendly. The composition of colors (color pigments) was placed on the lowest possible heavy metal content and the best possible environmental compatibility of the solvent and propellent gas value.Contents:1 piece / 150 mlPainting tips:

Content: 150 Milliliter (€93.00* / 1000 Milliliter)

€13.95*

Configure now

y0558 HT Car Bag XXL for Losi 5ive-T/2.0, Mini 5ive WRC, Desert Buggy XL and many more

The XXL version is especially made for the Losi 5ive-T, Mini 5ive WRC, Desert Buggy XL; Arrma Outcast/Kraton; Axial Honcho, Traxxas X-Max/XRT; UFRC GR1/Big Bully. Of course, other 1/5 and 1/6 large scale cars will fit into this bag as well; however, in this case the XXL bag gives you plenty of room for additional accessories. Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions: Length: 100 cmWidth: 57 cmHeight: 39 cm

€49.90*

8438 FG Body detail kit Touring cars

Genuine FG spare/option part.Body detail kit with different rearview mirrors, windscreen wipers and aerials to give the Touring car bodys a more detailed look.Contents:1 set

€21.90*

y0003 Billet brake lever, long

Genuine HT spare/option part. Fits HT Baja 5B premium brake and FG offroad models, race truck and Formula 1.Contents:2 pieces

€24.90*