y0109 Universal radio plate for FG 1/6 2WD

€99.90*

Available

Product number: montage_0001

EAN: 4058575010166

Product information "y0109 Universal radio plate for FG 1/6 2WD"

Genuine HT spare/option part.

Universal radio plate for FG 2WD Marder/Beetle/Off-Road Buggy/Pajero an all Monster and Stadium models.

With drilling templates for the following steering servos:

Hitec HS-805BB/HS-5745/5735/Orange Power
MPX Jumbo und Rhino

The size of the steering servo can vary because you can adjust the position of the aluminum tray bar to accomodate larger or smaller servos. You will need FG adapters for installation of the gas / brake servo: #5014/04 servo mounting frame for (standard sized) Futaba / JR, Thunder Tiger DS1015 - 2pcs.

Accepts FG servo frames for up to two throttle/brake servos (not included). Spacers for rx-box installation are included.

Old version chassis plates (~pre 2003) have a different bolt pattern. When installing this radio plate on an old chassis new mounting holes must be drilled into the chassis plate

The surface is plain aluminum. With the necessary effort it can be polished to a high luster.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

5014/04 FG Servo adapter frame, Futaba/JR, Thunder Tiger DS1015

Genuine FG spare/option part. Suitable for rc-plate 5014.Dimensions:Inside length: 44 mmInside width: 20,5 mmContents:2 pieces

€12.90*

6534/02 FG Throttle pivot post

Item N° 6534/02 Throttle pivot post 3.1mm - setRevised set for 2 mm linkages, but with 3.1 mm pivot bore to prevent linkage seizing. Can be used for throttle or brake applications.Set collars have 2.1 mm inner diameter.

€8.50*

6540 FG Receiver box

Genuine FG spare/option part. Splash-proofed receiver box for all merchantable small receivers, suitable for all car models 1:12 - 1:5.Dimensions:Length: upper section 92 mm, bottom 69 mmHeight: 48 mmWidth: 38 mmContents:1 piece

€15.90*

Details

5014/05 FG Bolt for battery holder

Genuine FG spare/option part.Plastic bolt for battery holder.Contents:2 pieces

€5.90*

6268 FG Battery holder - 1pce.

€14.90*

Details

Customers also bought

4491 FG rear lower alloy wishbone wide

Genuine FG spare/option part. Suitable for all FG models with wide rear axle and 4WD cars. Not suitable for Evo, Monster-Truck models with eight shock absorbers and Formel 1.Attention: in order to install the uprights to these a-arms you need one of the hinge pin versions listed below!Content:1 piece

€67.15*

68420/06 FG Alum. servo saver 80°, 1:5 4WD, complete

Genuine FG spare/option part. In details improved aluminium servo saver. Improvement through modification of the slant to 80° for the protective function. According to the regulating power and the number of steering servos the red and blue FG servo saver springs can be assembled. Only suitable for 4WD 1/5 scale.Contents:1 piece

€58.50*

6492 FG Steel spur gear 46T with adapter - set

Hardened steel spur gear for FG 1/6 off-road models, spur gear diameter 72 mm.Module: m=1,5

€84.90*

7472/01 FG Tuning clutch bell hardened, 1 pce.

Item N° 7472/01 Tuning clutch bell hardened, 1 pce.Case-hardened clutch bell made of hard andtough steel, without cooling hole, therefore suitablefor Off-Road Buggies.

€58.95*

Mielke 5741 Power Gearshift clutch for FG (not for Formel 1+Evo2020) Harm, RS5, HPI, Losi, 2,0mm springs, Mix with long clutch carrier

Genuine Mielke spare/option part. For offroad vehicles, less Grip or rain use.The new adjustable system features two aluminum and one carbon pad with special 2.0 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm. Contents:1 piece

€129.50*

Mielke 5443 Power Gearshift clutch for FG (except Formula 1+Evo2020), Smartech, Harm, Losi and HPI, carbon pads, 2,3mm springs

The new adjustable system features three carbon pads with special 2.3 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm.

€129.50*

Similar products

y0532 Universal radio plate for FG 1/6 4WD

Genuine HT spare/option part. Universal radio plate for FG 4WD Marder; Off-Road Buggy; Beetle and all 4WD Monster and Stadium Modelle. Optional for one or two servos.With drilling templates for up to two of the following steering servos:Big Scale Servo:Orange PowerHitec Servos:HS-805BB/MGHS-5745HS-5755FG Servos:65956596/li>Multiplex Servos:Jumbo´sRhinoCarson Servos:Mega EvoMega Evo ProAnd for all servos with the from 59x29x55 mm, 66x30x70mm. Parts like servos and decoration are not included! Spacers for throttle/brake servo (standard size) and rx-box are included.Delivery contents:Servo plateMountin boltsSpacerScrews and mounting materialThe surface is plain aluminum. With the necessary effort it can be polished to a high luster.

€79.90*

y0645 Radio plate mounting posts, aluminum, 38, 47 or 57 mm long

y0645 Length: y0645/03 - 57 mm

Genuine HT spare/option part. Round aluminum radio plate posts, diameter 8 mm, threaded for M4 mounting bolts. Your choice of 38 mm (firs rc-plate from Evo 04 and Evo 08), 47 mm or 57 mm length.The thread bore of the 30 mm version is countersunk on one end.Contents:2 pieces

€9.90*

6118/06 FG RC-plate 1:6 f.hydr. brake

Genuine FG spare/option part. For use with hydraulic brakes.Contents:1 piece

€15.90*

y0753 Servo mount adapter

Genuine HT spare/option part. This machined aluminum servo adapter allows easy installation of servos with a 69 x 18 mm mounting bolt pattern (for example Orange-Power, S8203) in vehicles / radio plates which provide a 75 x 18 mm mounting bolt pattern (for example Losi 5ive-T, Mini WRC, HPI Baja 5 series cars, many FG cars).The use of this adapter servo will neither tilt the servo, nor does it change installation height. Scope of delivery:1 x Servo mount adapter2 x Socket head cap screws 3 x 20 mm2 x Socket head cap screws 3 x 12 mm2 x Shim ring 3,2 mmContents:1 piece

€9.90*

6117 FG Radio plate for 4 servos

Genuine FG spare/option part. Radio plate suitable for all FG 1:6 2WD Off-Road models except Leopard. Vintage version.Contents:1 piece

€11.90*

6118 FG Radio plate 04 for 1:6 models

Genuine FG spare/option part. Radio plate with a new design. Suitable for all FG 1:6 Off-Road models except Leopard. This set includes the battery mount.Contents:1 set

€25.90*

8112/01 FG Mega Servo Plate for Leo 2020 2WD

Genuine FG spare/option part. Contents:1 piece

€49.95*

68240, FG Radio plate 4WD, plastic

Genuine FG spare/option part.Contents:1 piece

€13.80*

8112 FG Servo Plate for Leo 2020 2WD

Genuine FG spare/option part. Contents:1 piece

€49.95*

s054312, Smartech aluminum throttle servo mount, front, for Carson Gas Devil + CRT 4x4, Conrad Hell Devil, Smartech Titan - 1 pce.

Tweak resistant alloy servo mount to replace the stock plastic part.Distance between servo mounting threads: 18 mm.

€39.90*

6118/05, FG RC plate 1/6 for hydraulic brake

Genuine FG spare/option part. Contents:1 set

€25.90*

68414 FG Alloy radio plate 4WD, set

Genuine spare/option part.Alloy radio plate 4WD with distance bolts and servo mounting frame Futaba, JR, for steering servo FG 9960MG and MP Rhino digi 4.Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/Stadium models 4WD RTR.Contents:1 set

€43.99*