68420/06 FG Alum. servo saver 80°, 1:5 4WD, complete
€58.50
Available
Product information "68420/06 FG Alum. servo saver 80°, 1:5 4WD, complete"
In details improved aluminium servo saver.
Improvement through modification of the slant to 80° for the protective function. According to the regulating power and the number of steering servos the red and blue FG servo saver springs can be assembled. Only suitable for 4WD 1/5 scale.
Contents:
- 1 piece
Login
Customers also bought
Hardened steel spur gear for FG 1/6 off-road models, spur gear diameter 72 mm.Module: m=1,5
Item N° 7472/01 Tuning clutch bell hardened, 1 pce.Case-hardened clutch bell made of hard andtough steel, without cooling hole, therefore suitablefor Off-Road Buggies.
Genuine Mielke spare/option part. For offroad vehicles, less Grip or rain use.The new adjustable system features two aluminum and one carbon pad with special 2.0 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm. Contents:1 piece
The new adjustable system features three carbon pads with special 2.3 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm.
Adjustment tool for Mielke Power Gearshift clutches #5440 and #5441.
Genuine Mielke spare/option part. For easier change of springs or clutch shoes.Contents:1 piece
Customers also viewed
The mounting of the double servo saver enlarges the steering angle at the front axle. The outside front wheel achieves an essentially higher steering angle, therefore the curve radius is reduced and the model becomes more aggressive and faster in curves. This set is suitable for the Leopard 2WD Competition. To fix the set drill 4 bore holes with approx. 4,5 - 5,5mm.
Item N° 68420/05 Alum. servo saver 80°, compl., 1 pce.In details improved aluminium servo saver. Improvementthrough modification of the slant to80° for the protective function. According tothe regulating power and the number of steeringservos the red and blue FG servo saversprings can be assembled.
Genuine HT spare/option part. Bodies as shown on the picture, already painted and with applied decals. The wing attachment parts and the rear wing are enclosed. The body detail kits as mirrors, windscreen wipers etc. are not included.The body shell is vac-formed from 2 mm Lexan.Required body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 885 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mm/ul>Contents:1 piece
In details improved servo saver parts A+B. Through modification of the slant we improved the activation of the protective function. According to the use of the steering servo and the free movement of the servo saver the red and blue FG servo saver springs can be assembled. Suitable for the servo saver parts of servo saver 2010. Servo saver part B is made of high-strength aluminium.
This kit replaces the o-ring for sealing the drive cup shaft in the stock differential case by a real oil seal. Two new shims provide for the adjustment of the width of the shaft seal and replace the stock shim.Shaft seals are better than o-rings for sealing fast rotating shafts.The set includes the parts for retrofitting all three differentials of the vehicle.Installation can be done only in the differential housing. Unfortunately the corresponding bore in the differential gears is machined differently, so you have to stay with the O-ring for that application.Set includes:Three pieces shaft seal 10 x 15 x 3 mmThree pieces shim 15 x 21 x 0.2 mmThree pieces shim 10 x 20 x 0.3 mmFive pieces washer 10,5 x 20 x 2 mm
The mounting of the double servo saver enlarges the steering angle at the front axle. The outside front wheel achieves an essentially higher steering angle, therefore the curve radius is reduced and the model becomes more aggressive and faster in curves. This set is suitable for the Leopard 4WD Competition.