6117 FG Radio plate for 4 servos

€11.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_6117

EAN: 3410569685698

This is the successor of the product:

6118 FG Radio plate 04 for 1:6 models

€25.90*

Continue to product

Product information "6117 FG Radio plate for 4 servos"

Genuine FG spare/option part.

Radio plate suitable for all FG 1:6 2WD Off-Road models except Leopard. Vintage version.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

y0109 Universal radio plate for FG 1/6 2WD

Genuine HT spare/option part. Universal radio plate for FG 2WD Marder/Beetle/Off-Road Buggy/Pajero an all Monster and Stadium models. With drilling templates for the following steering servos:Hitec HS-805BB/HS-5745/5735/Orange Power MPX Jumbo und Rhino The size of the steering servo can vary because you can adjust the position of the aluminum tray bar to accomodate larger or smaller servos. You will need FG adapters for installation of the gas / brake servo: #5014/04 servo mounting frame for (standard sized) Futaba / JR, Thunder Tiger DS1015 - 2pcs. Accepts FG servo frames for up to two throttle/brake servos (not included). Spacers for rx-box installation are included.Old version chassis plates (~pre 2003) have a different bolt pattern. When installing this radio plate on an old chassis new mounting holes must be drilled into the chassis plateThe surface is plain aluminum. With the necessary effort it can be polished to a high luster.Contents:1 piece

€99.90*

Accessories / Spare parts

5014/04 FG Servo adapter frame, Futaba/JR, Thunder Tiger DS1015

Genuine FG spare/option part. Suitable for rc-plate 5014.Dimensions:Inside length: 44 mmInside width: 20,5 mmContents:2 pieces

€12.90*

6534/02 FG Throttle pivot post

Item N° 6534/02 Throttle pivot post 3.1mm - setRevised set for 2 mm linkages, but with 3.1 mm pivot bore to prevent linkage seizing. Can be used for throttle or brake applications.Set collars have 2.1 mm inner diameter.

€8.50*

6540 FG Receiver box

Genuine FG spare/option part. Splash-proofed receiver box for all merchantable small receivers, suitable for all car models 1:12 - 1:5.Dimensions:Length: upper section 92 mm, bottom 69 mmHeight: 48 mmWidth: 38 mmContents:1 piece

€15.90*

Details

Similar products

y0532 Universal radio plate for FG 1/6 4WD

Genuine HT spare/option part. Universal radio plate for FG 4WD Marder; Off-Road Buggy; Beetle and all 4WD Monster and Stadium Modelle. Optional for one or two servos.With drilling templates for up to two of the following steering servos:Big Scale Servo:Orange PowerHitec Servos:HS-805BB/MGHS-5745HS-5755FG Servos:65956596/li>Multiplex Servos:Jumbo´sRhinoCarson Servos:Mega EvoMega Evo ProAnd for all servos with the from 59x29x55 mm, 66x30x70mm. Parts like servos and decoration are not included! Spacers for throttle/brake servo (standard size) and rx-box are included.Delivery contents:Servo plateMountin boltsSpacerScrews and mounting materialThe surface is plain aluminum. With the necessary effort it can be polished to a high luster.

€79.90*

6118/06 FG RC-plate 1:6 f.hydr. brake

Genuine FG spare/option part. For use with hydraulic brakes.Contents:1 piece

€15.90*

y0753 Servo mount adapter

Genuine HT spare/option part. This machined aluminum servo adapter allows easy installation of servos with a 69 x 18 mm mounting bolt pattern (for example Orange-Power, S8203) in vehicles / radio plates which provide a 75 x 18 mm mounting bolt pattern (for example Losi 5ive-T, Mini WRC, HPI Baja 5 series cars, many FG cars).The use of this adapter servo will neither tilt the servo, nor does it change installation height. Scope of delivery:1 x Servo mount adapter2 x Socket head cap screws 3 x 20 mm2 x Socket head cap screws 3 x 12 mm2 x Shim ring 3,2 mmContents:1 piece

€9.90*

y0109 Universal radio plate for FG 1/6 2WD

€99.90*

6118 FG Radio plate 04 for 1:6 models

Genuine FG spare/option part. Radio plate with a new design. Suitable for all FG 1:6 Off-Road models except Leopard. This set includes the battery mount.Contents:1 set

€25.90*

8112/01 FG Mega Servo Plate for Leo 2020 2WD

Genuine FG spare/option part. Contents:1 piece

€50.90*

y0645 Radio plate mounting posts, aluminum, 38, 47 or 57 mm long

y0645 Length: y0645/03 - 57 mm

Genuine HT spare/option part. Round aluminum radio plate posts, diameter 8 mm, threaded for M4 mounting bolts. Your choice of 38 mm (firs rc-plate from Evo 04 and Evo 08), 47 mm or 57 mm length.The thread bore of the 30 mm version is countersunk on one end.Contents:2 pieces

€9.90*

68240, FG Radio plate 4WD, plastic

Genuine FG spare/option part.Contents:1 piece

€13.80*

8112 FG Servo Plate for Leo 2020 2WD

Genuine FG spare/option part. Contents:1 piece

€50.50*

s054312, Smartech aluminum throttle servo mount, front, for Carson Gas Devil + CRT 4x4, Conrad Hell Devil, Smartech Titan - 1 pce.

Tweak resistant alloy servo mount to replace the stock plastic part.Distance between servo mounting threads: 18 mm.

€39.90*

6118/05, FG RC plate 1/6 for hydraulic brake

Genuine FG spare/option part. Contents:1 set

€25.90*

68414 FG Alloy radio plate 4WD, set

Genuine spare/option part.Alloy radio plate 4WD with distance bolts and servo mounting frame Futaba, JR, for steering servo FG 9960MG and MP Rhino digi 4.Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/Stadium models 4WD RTR.Contents:1 set

€43.99*

Customers also viewed

6118 FG Radio plate 04 for 1:6 models

Genuine FG spare/option part. Radio plate with a new design. Suitable for all FG 1:6 Off-Road models except Leopard. This set includes the battery mount.Contents:1 set

€25.90*

6000CZ30 FG Marder 2WD Legend 30 Years - limited and numbered special edition

To celebrate the 30th anniversary of the legendary Marder 1/6 scale 2WD buggy, FG Modellsport/T2M releases a special edition, limited to 300 numbered pieces, with the original signature of Franz Gröschl on the sticker sheet as well as a top equipment (G260RC Zenoah engine, hi-capacity low friction aluminum shock absorbers and special aluminum engine mounts). with original 260 Zenoah with Low-Friction Alu shocks with alloy enginemount The Models is built on a 4 mm u-bended chassis. All borings of the lower side are countersunk, therefore the screw heads can't bear out.Double wishbones at font and rear axle as well as 4 bulk oil-pressure shock absorbers guarantee perfect ground adherence. All rotating parts are supported by ball-bearings. Rear gear wheels, differential gears and all driving elements are case-hardened. The side guards protect the model from dirt. With original signature of Franz Gröschl. The model is equipped with a powerfull 26 ccm engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 liters enables you to drive about 45 minutes. The engine can be started without difficulties through the integrated pull-start. To complete the models all merchantable servos and radio control systems are suitable.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery

€799.99*

Configure now

y0532 Universal radio plate for FG 1/6 4WD

€79.90*

y0711 Double sided split alloy servoarm for Savöx SV-0236MG, Rhino and Hitec 805 servo

Splitted Alloy servoarm for a more protecting screw connection (with a 2,0 mm allen head screw driver) causing stiffness on the servo output shaftSuitable for all servos with an output shaft with 15 tooth spline shaft, for example:Multiplex RhinoHitec 805Savöx SV-0236MGLOSB 0886 S901T (Original Losi 5ive-T throttle Servo servo)LOSB 0884 S900S (Original Losi 5ive-T steering servo)and many more!holes for linkage with M3 threadWhen you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.Content:1 pieces

€19.90*

5014 FG RC-plate for 1:5/Truck/Leopard

Genuine FG spare/option part. Plastic radio plate for installation of up to 4 servos. Fits all FG street models (except Formula 1) and Leopard models.You will need FG #6118/05 for installation of any steering servo other than Hitec 805BB.Contents:1 piece

€19.90*

6118/05, FG RC plate 1/6 for hydraulic brake

Genuine FG spare/option part. Contents:1 set

€25.90*

FG Off-Road Buggy WB535 2WD

The FG Off-Road Buggy WB535 is presented with a longer wheelbase and a pleasant design. All-wheel-drive, completely mounted ready-to-drive, combined with the open Off-Road Buggy body shell with metal roll cage and gigantic Off-Road rims with low-profile knobbed tires.The body shell is standard unpainted. Equipped with a 26cm³ engine the Off-Road Buggy is aggressive and also a tremendous jumper. The 35 mm wheelbase extension results in a higher tracking stability. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Equipment of the modelAngled 4 mm, alloy chassis, completely covered belt drive, two differential gears at front and rear axle with hardened bevel gearwheels, closed front axle housing, front bumper, double wishbones at front and rear axle, gear brake, adjustable right/left thread rods at the track rods and at the front and rear wishbones, front uprights with steering stops, gearwheels made of case-hardened steel, completely ballbeared, four large-volume oil-pressure shock absorbers, receiver box.According to side rails and the closed body shell the Off-Road Buggy Buggy is almost protected against dirt from underneath. The two-parts body shell is made of polycarbonate, the rear spoiler is made of impact resistant polyamide. Driver´s coverage and roll cage parts are made of aluminum. The giant low-profile knobbed tires are glued on black rims.The model is equipped with a powerful 26cm³ (series) combustion engine with ready-for-use oiled air filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every patrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-stat system the engine can be started without any difficulties. The RTR version is delivered with installed and preset radio control system and rechargeable batteries. To complete the non-RTR version all popular servos and radio control systems are suitable.The pictures may display the car with some optional items which are not included, like bed-mounted rollbar, lights, front bumper or mirrors. These items can be added in the drop down menus.Measures:Length: 770 mmWidth: 480 mmHeight: 280 mmWheelbase: 535 mmWeight: 10,8 kg

€899.90*

Configure now