TT1106 Top Tuning Motor cooling for FG brushless cars, long version.
€44.90
Available
Product information "TT1106 Top Tuning Motor cooling for FG brushless cars, long version."
The 60 x 60 x 24 mm TT1028 fan provides way more air flow than the two original fans combined. A chrome-plated steel grille on the intake side protects the fan.
Two bracket lengths are available. The short version is intended for motors up to approx. 80 mm overall length. This applies e.g. to all standard FG motors. For longer motors we recommend the long bracket for a better position of the fan over the motors cooling fins.
Performance data of the fan:
- Dimensions: 60 x 60 x 24 mm
- Operating voltage: 5 - 8.4 V
- Current: 0.5A
- Speed: 8.500 1/min @ 8.4 V
- Flow rate: 39.2 CFM
Scope of delivery:
- Fan TT1028
- Long fan mounting frame
- Protective grille for fan
- Adapter cable to JR connector
- Installation hardware
Login
Customers also bought
Genuine HT spare/option part.Two-pole, reverse-polarity protected socket with very high current capacity. The opening in the contact for the cable has a diameter of 6.5 mm, which is suitable for stranded cables up to about 16 mm² (~ 5 AWG). The easy to grab housing ensures easy disconnection.For assembly, the contact with a soldered cable is press fitted into the housing from the front, where it snaps into place.When used without the blue housing, the contacts are also compatible with the 8 mm bullet connectors found on many larger brushless motors.Contents:1 piece
Genuine FG spare/option part. You can check and adjust the inclination of front and rear wheels with the inclination-goniometer. In connection with the measuring bench you can also check toe-in of the rear axle. Suitable for all FG models and also other makes scale 1:8-1:5.Delivery content is only the inclination - goniometer.Contents:1 piece
Genuine HT spare/option part.Space-saving no-wire adapter, just 58 mm long.Contents:1 piece
Genuine HT spare/option part.Space-saving no-wire adapter, just 56 mm long.Contents:1 piece
Genuine rc-car-online spare/option part. Versatile aluminum bracket for easy installation in panels or RC boxes with up to 4 mm wall thickness. Only a 6 mm hole is required and the bracket is fastened with the included nut. Alternatively, for installation in thicker material an M6 thread can be tapped as well. An O-ring provides a seal when installed in RC boxes.The bracket has a stepped hole into which the common antenna tubes of about 3.2/3.3 mm diameter can be inserted, but not pushed through. The hole for the antenna cable has a diameter of approx. 2.5 mm.The height of the bracket above the mounting surface is 16 mm.The scope of delivery includes an end cap and two antenna tubes with a length of approx. 170 mm.Contents:1 set
Genuine HT spare/option part.Two-pole, reverse-polarity protected plug with very high current capacity. The opening in the contact for the cable has a diameter of 6.5 mm, which is suitable for stranded cables up to about 16 mm² (~ 5 AWG). The easy to grab housing ensures easy disconnection.For assembly, the contact with a soldered cable is press fitted into the housing from the front, where it snaps into place.When used without the blue housing, the contacts are also compatible with the 8 mm sockets found on many larger ESCs.Contents:1 piece
Customers also viewed
Powerful cooling fan with bracket for installation on FG electric gear plate 66516 (touring cars and off-road models) or chassis strut 10701 (Formula 1).The 60 x 60 x 24 mm TT1028 fan provides way more air flow than the two original fans combined. A chrome-plated steel grille on the intake side protects the fan.Two bracket lengths are available. The short version is intended for motors up to approx. 80 mm overall length. This applies e.g. to all standard FG motors. For longer motors we recommend the long bracket for a better position of the fan over the motors cooling fins. Performance data of the fan: Dimensions: 60 x 60 x 24 mm Operating voltage: 5 - 8.4 V Current: 0.5A Speed: 8.500 1/min @ 8.4 V Flow rate: 39.2 CFM Scope of delivery: Fan TT1028 Short fan mounting frame Protective grille for fan Adapter cable to JR connector Installation hardware
Genuine Top Tuningspare/option part. High performance fan as upgrade for various applications in electric models.The size of 40 x 40 x 10 mm can be swapped e.g. for the fans of the FG motor cooling unit or the fans of various speed controllers.The air flow rate is much higher than with the standard units!The operating voltage of the fan with 5 - 8.4 V is perfectly adapted to these requirements. Technical data: Dimensions: 40 x 40 x 10 mm Operating voltage: 5 8.4 V Current: 0.65A Speed: 16,000 rpm @ 8.4 V Air flow: 16.7 cfm Connector: Dupont 2-pin female (compatible with BEC/Futaba/Universal) Cable length: approx. 17 cm Contents:1 piece
Genuine FG spare/option part. Competition gear shaft, hardened and ground.Suitable for all FG models except Formel 1 and FG 4WD.Dimensions:Length: 103 mmDiameter: 10 mmContents:1 piece
Product information "Hobbywing Ezrun MAX5 HV Combo 56118SD 650kV G2"Discover impressive performance with the second generation of the Ezrun MAX5 HV G2 ESC - now available in the combo version with the matching 56118SD G2 motor with 650kV! This enhanced MAX5 series with 250A offers numerous innovations, making the driving experience with 1/5th scale buggies and trucks even more thrilling.Compared to the regular MAX5 combo, the sensor mode has been significantly improved and equipped with a waterproof cable for reliable performance. The power has been increased by a whopping 18%, while reducing heat generation, resulting in even more power and efficiency. The ESC's strong, explosive, and stable output power, along with excellent low-speed linearity, ensures it excels in various applications. Quick acceleration, high-speed maneuvers, jumps, and slower driving are no problem at all. Overall, the ESC has been so greatly improved that you won't want to look back. Especially when paired with the EZRUN 56118SD G2 motor, you also benefit from motor overheating protection and turbo timing adjustment.It's the perfect way to dive right into the 1/5th scale world with ease!Features:Built-in ultra-strong switching mode BEC to support various servos.Up to 24° of turbo timing adjustment (when using a 56118 G2 motor).Data logging function.12 adjustable parameters.Increased capacitor capacity by 45%.New waterproof sensor cable.Fully sensored system for enhanced acceleration and more powerful performance.With the EZRUN 56118SD G2 motor, the MAX5 HV G2 features integrated motor overheat protection.Easy-to-disassemble motor for maintenance work.Technical Specifications:ESCType:Brushless SensoredCurrent (cont./peak):250A / 1600ANo. of Cells:6-12S LiPoMotor Limit:8S Lipo: KV <= 120012S Lipo: KV <= 800 56118 MotorBEC:6V/7.4V/8.4V @8A (Switch Mode)Fan:Yes (BEC)Programming:LED Program CardLCD Programming Box (G2)OTA Bluetooth ProgrammerSeperate Programming PortWaterproof:YesDimensions:94.5x59.4x50.9mmWeight:428.5gApplication:1/5 Buggy, TruckMotorType:Brushless, SensoredkV Rating:650kVNo-Load Current:5.5ANo. of Cells:8-12S LiPoPoles:4Diameter:56mmLength:119.2mmShaft Diameter:8mmShaft Length:30mmWeight:1272gApplication:1/5 Buggy, TruckDelivery:1x Ezrun MAX5 HV G2 ESC with 250A1x 56118SD G2 Motor with 650kV1x Manual
Genuine FG spare/option part.Square wheel driver in high-strength alloy material with M6 fixing thread. Essentially higher retention force. Suitable for all models.Dimensions:14 mm wide18mm squareBore diameter 8 mmContent:2 pieces