Set collar, 5 pcs.

rc-car-online

€3.45*

Prices incl. VAT plus shipping costs

Available

stellring Inner diameter

Product number: stellring.0

EAN: 4058575022572

Product information "Set collar, 5 pcs."

Set includes 5 set collars with allen key grub screws and 1.5 mm allen key.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Customers also bought

y19302/02 Piston Blocker for almost all engines

Genuine HT spare/option part. Helpful tool for removal of clutch shoes, flywheels and many more.FitsZenoah G230/G240/G260/G270/G290/G320Chung-Yang enginesPT enginesLosi enginesHPI enginesThreadsize:M10 x 1Contents:1 piece

€9.90*

ST0010 SPEED TEC weight-reduced balanced tuning flywheel

Genuine Speed-Tec spare/option part. SPEED TEC tuning flywheel for Zenoah G230/240/260/270/290/320 and Chung Yang engines (includes HPI Fuelie and Losi).The weight reduced (210 vs. 230 grams) flywheel enables the engine to accelerate faster and rev higher. The optimal balancing guarantees better endurance at lower fuel consumption!A durability approval exists!Contents:1 piece

€99.90*

y19302/01 Flywheel and Clutch puller CY, Zenoah, HPI, Losi

Genuine HT spare/option part. Especially for CY / Zenoah G230/240/260/270/290/320, HPI and Losi engines.Can be used for removal of the standard clutch as well!Contents:1 piece

€17.90* €22.90* (21.83% saved)

6561/01 FG Hitec Transmitter Aggressor - 1pce.

Ergonomically designed 3 Channel FM Transmitter for RC cars, boats and motor bikes in a modern design, handy and light.- Servo reversing on channel 1+2- 3 LED battery status indicators- Low Battery Alarm- Dual rate steering- Charging Jack- Foam steering wheel

€64.70*

ST-AN21D SPEED TEC 0,25 mm EWP207 Silencer gasket for CY / Zenoah AN - expansion sealing gasket

Genuine Speed-Tec spare/option part. For all Zenoah G230/240/260/270/290/320 / CY / Fuelie / PT / Losi / CarsonAN - expansion sealing gaskets are in use in the 2-stroke motor sports for years and are based on NBR-linked cellulose fibers. They are especially used for sealing hot oils, greases and fuels! The sealing material is compressed during assembly, and as soon as it comes into contact with fuel, it swells again. Thus it is i.e. possible to make up for irregularities in the sealed surfaces (i.e. cylinder / crankcase) and seal them properly! The material of the SPEED TEC AN - expansion sealing gaskets guarantees a very good dimensional accuracy and is often the solution for leaks on your engine! Technical data of the material in contact with fuel:- Rebound ASTM G > 30%; increase in thickness < 5%; weight gain < 55%;- Compressibility ASTM F36 G 22.5% +/- 2.5 27.5% +/- 7.5Contents:1 piece

€3.50*

Set collar, 5 pcs.

stellring Inner diameter: y1083 3 mm+ 0.5EUR

Set includes 5 set collars with allen key grub screws and 1.5 mm allen key.

Variants from €3.45*

€3.95*

Similar products

Set collar, 5 pcs.

stellring Inner diameter: y1084 4 mm+ 0.95EUR

Set includes 5 set collars with allen key grub screws and 1.5 mm allen key.

Variants from €3.45*

€4.40*

y1082 Stop collar 2 mm

Genuine HT spare/option part. Necessary for all throttle and brake linkages.Dimensions:Outer diameter: 7 mmWidth: 5 mmContents:5 pieces

€3.45*

Details

y0758 Special exhaust manifold screw set, 5 pcs.

Cap screws for 1/5 & 1/6 large scale cars, DIN 912 - 8.8 M5x16 with corresponding spring washers DIN 127.The spring washer's tension prevents loosening of the manifold screws.Bag with five each screws and spring washers.Part is delivered in silver or black color from vendor!

€3.90*

8465 FG Collet set

Genuine FG spare/option part.Dimensions:Inner diameter: 2 mmCollet outer diameter: 7 mm x width 5 mmOuterdiameter: 5 mm x width 8 mmContents:4 pieces

€8.50*

6020 FG Collet 2,1 mm

Genuine FG spare/option part. Necessary for all throttle and brake linkages.Dimensions:Outer diameter: 7 mmWidth: 5 mmContents:5 pieces

€5.95*

This product is currently not available.

6020/03 FG Collet 3 mm

Genuine spare/option part.Dimensions:Outer diameter: 8 mmWidth: 5 mmContents:5 pieces

€4.30*

AT-DBXL002/01 ATOP Spacer bushings for camber/steering rods of Losi DBXL and DBXL-E

Genuine ATOP spare/option part. Aluminum spacer bushings for the ball joints on camber and steering rods of Losi DBXL and DBXL-E.Content:8 pieces

€9.80*

8475 FG Adjustment screw for rear disk brake - 1pce.

Spare part for , , , , , , , , , , and .Thread size M6x17Bore 2 mmWrench size 8 mmTotal length 25 mm

€5.90*

67260/04 FG Aluminium collet 5mm for Leopard 2WD/4WD, 2pce.

Item N° 67260/04 Aluminium collet 5mm for Leopard 2WD/4WD, 2pce.Spare part for the Leopard 2WD/4WD 2010 version

€4.70*

67232 FG Aluminium ball collet ring Ø10 x 15mm, hole 6mm for Leopard 2WD/4WD, 2pce.

Item N° 67232 Aluminium ball collet ring Ø10 x 15mm, hole 6mm for Leopard 2WD/4WD, 2pce.Spare part for the Leopard 2WD/4WD 2010 version

€7.90*

SSB024A GPM Universal Servo linkage

Genuine GPM spare/option part. GPM servo linkage with stainless steel turnbuckle.Ball joints with 4 mm bore, M6 threaded ball cups. Mounting hole spacing minimum 49 mm, maximum approx. 54 mm.Includes screws and nuts.1 piece

€14.90*

y1345 Drive pins, choice of sizes, e.g. for Losi, Mini and HPI cars

y1345 Size: y1345/04 - 5 x 24 mm

Genuine HT spare/option part. Hardened pins made of 100Cr6 steel for driveshafts, differentials, wheel drives and similar applications. Pack of ten. Sizes available:y1345/01: 4 x 18 mm, e.g. for Losi 5ive-T/Mini and HPI Baja differentials or HPI Baja layshafty1345/02: 4 x 20 mm, e.g. for Losi 5ive-T/Mini CVD jointsy1345/03: 4 x 24 mm, e.g. for Losi DBXL and HPI Baja wheel hexy1345/04: 5 x 24 mm, e.g. for Losi 5ive-T/Mini wheel hexContents:10 pieces

€4.90*