Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

SSB024A GPM Universal Servo linkage

Product information "SSB024A GPM Universal Servo linkage"

Genuine GPM spare/option part.

GPM servo linkage with stainless steel turnbuckle.

Ball joints with 4 mm bore, M6 threaded ball cups. Mounting hole spacing minimum 49 mm, maximum approx. 54 mm.

Includes screws and nuts.


  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

TT1040 Top Tuning 24 mm hex wheel drives for Losi Super Baja Rey / 2.0 and Super Rock Rey / plastic spindles
Genuine Top Tuning spare/option part.TopTuning 24mm hex wheel drives are required if you want to run wheel combos with the standard 24mm hex drive (such as Losi 5ive-T/B; DBXL; HPI-Baja etc.!) on your Losi Super Baja-Rey and Super Rock Rey.The stock Super Baja-Rey / Super Rock Rey20 mm hex drives (# LOS252077) will be swapped for the TopTuning 24 mm version. No additional parts are required for installation of the 24 mm hex wheel drivers. The Losi Super Baja-Rey's fake brake discs and calipers must be removed prior to assembly.Attention: For the attachment of the wheels you also need wheel nuts with M18x1.5 thread (i.e. AT-5T004), which are also offered in our shop's option menu!Please note: The adapters only fit in combination with the standard plastic steering knuckles or wheel bearing carriers. The aluminium versions have a slightly larger bearing distance, which then prevents the drive pin from being fitted.As already mentioned in the Losi instruction manual, the gearing should be adjusted depending on terrain and tire tread.Depending on tire size the rear of the fender wells will need some cutting.Please note: the wide rear wheels from MadMax or HPI do not fit!This applies in particular to aggressive tread large diameter off-road tires and demanding terrain. In this case we recommend the profile regraded, nitrided 15T pinion # TT1021/07 from the TopTuning.Weight per piece 28 grams (original LOS25077 weighs 23 grams).Contents:2 pieces of 24 mm hex wheel drives, machined from 7075 aluminum2 pieces of hardened drive pins 3x23,8 mm

€24.90*

Average rating of 0 out of 5 stars

AT-5T004 ATOP Aluminum closed wheel nuts Losi 5ive-T/2.0/B, Mini, DBXL/2.0 and MTXL
Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP. Closed design, thread size M18 x 1,5 for Losi 5ive-T/B, Mini, DBXL and MTXL. Wrench size 24 mm, may fit other cars as well.Contents:4 pieces

€22.90*

Average rating of 0 out of 5 stars

G003 Carson Tire tool 24mm hex
Genuine Carson spare/option part. Contents:1 piece

€9.90*

Similar products

Average rating of 0 out of 5 stars

6534/02 FG Throttle pivot post
Item N° 6534/02 Throttle pivot post 3.1mm - setRevised set for 2 mm linkages, but with 3.1 mm pivot bore to prevent linkage seizing. Can be used for throttle or brake applications.Set collars have 2.1 mm inner diameter.

€7.90*

Average rating of 0 out of 5 stars

y0529/01 Steel ball joint 4 mm r/h or l/h thread, 3 mm bore in ball
y0529_01 Version: y0529/01R One piece right hand thread
Steel ball joint 4 mm r/h or l/h thread, 3 mm bore in ball, for servo saver/servo linkage.This version is for servo linkage.Sets available:One each with r/h and l/h threadOne x r/h threadOne x l/h thread

€5.90*

Average rating of 0 out of 5 stars

2012/502 Brake linkage set dedicated to Mecatech FW01 and FG Evolution
2012/502 Brake linkage set dedicated to Mecatech FW01 and FG Evolution.Content:1018/01 Throttle linkage Evo 09 / Comp. 071 x 6534/02 Throttle pivot post for 2 mm linkages 1 x 1018/05 Spacer bushing 5 x 20 mm for throttle linkage Evo 08/5101 x Screw M3 x 18 mm2 x Nut M3

€17.90*

Average rating of 0 out of 5 stars

10020/01 FG Connection rods-set for F1
Suitable for Formula 1.

€3.70*

Average rating of 0 out of 5 stars

2012/504 Throttle/brake servo horn dedicated to Mecatech FW01 and FG Evolution
Throttle/brake servo horn dedicated to Mecatech FW01 and FG Evolution.Suitable for all servos with an output shaft with 25T spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!Content:1 x y0700 Double sided alloy servo horn1 x y0700/01 Single-sided alloy servo horn2 x 1018/05 Spacer bushing 5 x 20 mm for throttle linkage Evo 08/510 (one spacer drilled to 3 mm inner diameter)1 x M3 x 30 mm Screw2 x M3 x 12 mm Nut

€27.90*

Average rating of 0 out of 5 stars

1018/01 FG Tuning Throttle linkage
Genuine FG spare/option part. Tuning rods with flexible ball head for the screw on the engine.Fits on all FG models with lying engine.Contents:1 piece

€8.90*

Average rating of 0 out of 5 stars

2012/503 Steering servo linkage set dedicated to Mecatech FW01
Steering servo linkage set dedicated to Mecatech FW01Content:1213/11 Steering linkage l./r., M4 x 42 mm1 x 66244, Ball joint 7mm M4, 2 pcs.1 x 1213/10 Steel ball 7 x 6,5 mm, 2 St.2 x Screw M3 x 16 mm2 x Nut M3

€24.90*

Average rating of 0 out of 5 stars

1018/05 FG Spacer bushing 5 x 20 mm for raising throttle linkage
Original Losi Ersatz-/Tuningteil.Spare parts for Evo Porsche to get there without any problems with the linkage on the fuel tank. But also a very useful distance bolts of it is because the gas / brake / hydraulic linkage to the servo to insert later. Therefore will make the bending of the linkage in most superfluous.The recommended screw us with the part number 6724/12 available as a link in the lower part of the page for accessories.Contents:1 piece

€3.90*

Average rating of 0 out of 5 stars

2012/501 Throttle linkage dedicated to Mecatech FW01 and FG Evolution
Throttle linkage dedicated to Mecatech FW01 and FG Evolution.Set includes:1 x 1018/01 Throttle linkage Evo 09 / Comp. 071 x 6534/02 Throttle pivot post for 2 mm linkages1 x Screw M3 x 20 mm2 x Nut M3

€16.90*

Average rating of 0 out of 5 stars

2012/500 Linkage set dedicated to Mecatech FW01, complete
Complete set for steering, throttle and brake linkagesSet includes:3 x 6534/02 Throttle pivot post for 2 mm linkages 1 x y0132 y0132 Linkage rod for MecaTech brakes1 x 1213/10 Steel ball 7 x 6,5 mm1 x 66244, Ball joint 7mm M41 x 1213/11 Steering linkage l./r., M4 x 42mm1 x 6020 Set collar 2,1mm1 x 1018/01 Throttle linkage Evo 09 / Comp. 077 x Nut M32 x Screw M3 x 16 mm3 x Screw M3 x 18 mm 2012/501 Throttle linkage 2012/502 Brake linkage set 2012/503 Steering servo linkage set 2012/504 Throttle/brake servo horn The Servo arm is suitable for all servos with an output shaft with 25T spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!

€79.90*

Average rating of 0 out of 5 stars

8017 FG Brake rod set for 1:5
For touring cars and Leopard. With 2 mm thick and 440 mm in the lenght

€9.90*

Average rating of 0 out of 5 stars

10028 FG Steering rod M4x78mm - 2pcs.
Suitable for Formula 1.

€4.30*

Customers also viewed

Average rating of 0 out of 5 stars

500405213 Carson Servo link
Genuine Carson spare/option part. Contents:1 set

€16.99*

Average rating of 0 out of 5 stars

305173, s054020, Steering servo linkage Carson / Smartech 4x4, set

€9.25*

Average rating of 0 out of 5 stars

6917/16 FG Pan-head flange screw with Torx M6 x 16 mm, 5 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:5 pieces

€4.30*

Average rating of 0 out of 5 stars

32572 Servo linkage with M4 turnbuckles
cs_32572 Content: 32572/02 Set with steel balls r/l+ 19.6EUR
Genuine Smartech spare/option part.Complete servo linkage with turnbuckle and M4 ball joints with 3 mm bore for the balls with the order number 32523. Steel ball joints with r/h and l/h thread and the order numbers y0529/01R/y0529/01L are also available for this turnbuckle. You can select them in the options menu.Turnbuckle dimensionsLength: 40 mmLength of 4 mm hex section: 10 mmThread size: 4 mmPlastic ball joint dimensions:Socket length: 20 mmBall height: 8 mmThread size: 4 mmDimensions of assembled linkage:max. length: 67 mmmin. length: 57 mmContent:2 pieces

Variants from €19.90*
€39.50*

Average rating of 0 out of 5 stars

1018/01 FG Tuning Throttle linkage
Genuine FG spare/option part. Tuning rods with flexible ball head for the screw on the engine.Fits on all FG models with lying engine.Contents:1 piece

€8.90*

Average rating of 0 out of 5 stars

y1471 Turnbuckle wrench 6 mm
Genuine HT spare/option part. Handy wrench for 6 mm turnbuckles.Maße: Wrench size: 6 mmLength: 75 mmContent:1 piece

€9.90*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Plugin Development