Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

7573 FG Radio controll 2,4 GHz FG-RS3 incl. receiver

Product information "7573 FG Radio controll 2,4 GHz FG-RS3 incl. receiver"

Genuine FG spare/option part.

  • Wheel / trigger type transmitter with ergonomic design
  • Rubber coated non-slip wheel
  • Large LCD display for easy settings
  • 10 model memories
  • FHSS Modulation
  • Failsafe
  • Dual rate on channels 1, 2 and 3
  • Trims on the 3 channels
  • Low voltage (9,5V)
  • 7573/01 FG receiver 2,4 GHz fpr FG-RS3


Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

y0720 rc-car-online Transmitter bag
Genuine HT spare/option part. Extremely sturdy, fully padded transmitter bag! Fits all popular pistol grip transmitters Top quality; with padded adjustable length retaining straps to secure the transmitter, large zippered flap and adjustable carrying strap. Dimensions: Width: 23 cmHeight: 34 cmDepth: 17 cmContents:1 piece

€24.90*

Average rating of 0 out of 5 stars

y0735 Safety clip for Universal / JR / Futaba connectors
Genuine HT spare/option part. Protects the mated connection to prevent them from coming apart accidentally. Particularly recommended for direct power supply cords, as a tensile load on the cable can remove the link unnoticed and then you would perhaps think of a servo failure in the first place.The small size usually allows the installation even inside the receiver box.Also suitable for securing the connection of the receiver battery; the use of this clip means a big improvement in safety with little effort.Contents:1 piece

€1.50*

Customers also bought

Average rating of 0 out of 5 stars

7348 FG/Carson/Smartech Tank complete without ventilation - 1pce.
Suitable for all FG/Carson/Smartech cars except FG Evo and Carson 4WD.Please note that tank mount 7143 is required for installation. Installation in a Carson/Smartech 1/6 off-road car requires drilling of two new 4.5 mm diameter holes into the chassis plate. Drilling template is included.Comes as shown with fuel lines, grommet and gas cap included.

€51.20*

Average rating of 0 out of 5 stars

6546/02 FG receiver battery Ni-MH 6V 3600mAh
Genuine FG spare/option part.Measures:Width: 111 mmHeight: 47 mmDepth: 23 mmContents:1 piece

€37.50*

Average rating of 0 out of 5 stars

y1072 HT Alloy differential spur gear protector
Genuine HT spare/option part.Gear protector for the bottom of the 2WD chassis plate. Replaces stock plastic part FG 6082 or Carson 32481.Contents:1 piece

€29.90*

Average rating of 0 out of 5 stars

y1032 HT Aluminum shock tower Marder 2WD
Genuine HT spare/option part.Fits Marder, Beetle, Pajero and Monster Beetle,Material thickness:6 mmContents:1 piece

€47.90*

Similar products

Average rating of 0 out of 5 stars

7573/01 FG Receiver 2,4 GHz for FG-RS3
Genuine FG spare/option part. Contents:1 piece

€42.40*

Customers also viewed

Average rating of 0 out of 5 stars

y0688 HT RTR set with 2.4 GHz remote control for all FG and Carson 1:6 scale models
The Reflex Wheel Pro III is the perfect choice for sport-level car, truck and boat drivers. Everything you need to bash around your backyard or local track. Proven performance, reliability and range from the Spektrum brand make the Reflex Wheel Pro III great for someone looking to get involved in RC surface or a great grab-and-go transmitter for the expert. Key FeaturesPerfect for sport level cars and boatsErgonomic gripServo reversingProven reliability from the Spektrum brandReflex Wheel Pro III 3-channel receiver includedInterchangeable grips (Medium grip included. Other grip sizes sold separately in Optional Accessories)Travel adjustProduct SpecificationsNumber of Channels: 2Modulation: DSMRBand: 2.4GHzReceiver: Reflex Wheel Pro III Receiver Battery Type: AAThis set contains:Reflex Wheel Pro IIIy1570 Servo 54kg-cm/0,11 s/6 Volt till 8,4 volt y2009 Top Tuning Digital pro Servo 20 kgy0425 Y-harness, universal connectorLOSB 9642 Global AC 6V Charger 2000 mAh 6V Battery with universal connectorWhen used in a FG 2WD car, adaptor plate 6118/02 is required for steering servo installation.

€180.10*

Average rating of 0 out of 5 stars

2PCKA-AM40 Futaba Megatech Radio control with Servo
Genuine Futaba replacement / option part.Handy pistol-grip system with interference-insensitive FM modulation, ideal for controlling RC cars, especially for 1:5 models that have a gasoline engine with electric or magnetic ignition.The non-slip, rubber-coated knob allows steering movements like in the original car.The turning distance, the middle position and end points of the steering and throttle servo are adjustable. Conveniently positioned controls allow trim and travel to be adjusted on the transmitter even while driving.The pistol trigger allows fast acceleration and sensitive braking. The center position can be selected in a ratio of 7:3 or 5:5 to optimally adjust the trigger for combustion and electric cars. A 3-stage LED display system provides precise information about the current operating voltage of the transmitter at all times.Plug-in crystals that can be easily changed from the outside and a servo reverse function for reversing the servo direction are of course part of the basic equipment of such a system.All switches and controls which are not used during driving are protected under a smoked glass cover on the front of the transmitter.A built-in charging socket allows easy conversion to rechargeable NC battery operation.Functions: ATV steering Servo travel setting separately for throttle and steeringVariable Rate Control travel reduction for steering Neutral trim for steering and throttle Content: Transmitter Megatech Receiver R-122 JE 40 MHz Servo S3003 Battery box - BEC Switch cable with charging battery box BEC Servo accessories

€99.90*

Average rating of 0 out of 5 stars

500500053 Carson Reflex Wheel Pro III 2.4 GHz BEC
Genuine Carson spare/option part. The Reflex Wheel Pro III is the innovative 2-channel entry-level RC system from Carson-Model Sport. The steering angle and the servo travel on the throttle are adjustable (Dual Rate). This allows each model to be controlled very precisely and tuned to the road. In addition, the throttle can be limited for beginners and children. The chrome steering wheel with cellular rubber surface allows precise control and can be tilted individually forwards and backwards. The automatic stop function (low-voltage protection) integrated in the receiver is the life guard for your combustion engine model. This remote control system is ideal for all areas of RC-Car sport.Absolutely ingenious yet simple is the binding procedure:1. Switch the receiver on2. Press the setup key3. Switch on the transmitter - READY!Technical details: Operating voltage transmitter 4.8 to 6 V Operation possible with Li-Ion battery or 4x AA NiMh cells 2.4 GHz FHSS system (frequency hopping spread spectrum) Two infinitely variable, fully proportional channels Servo reverse for both channels (reverse direction) Trim function for throttle and steering Dual Rate for both channels (servo travel limit) Power supply of the BEC receiver from a battery with 4.8 - 7.2V possible Integrated fail-safe (programmable) Uni connector system for Futaba and Graupner-JR Charging socket (positive center pole) Battery status indication by means of LEDContents:1 x 2-channel transmitter 2.4 GHzBEC Mini receiver

€64.99*

Average rating of 0 out of 5 stars

P-CB10PX Futaba T10PX 2.4GHz with R404SBS receiver
The T10PXR is a 10-channel 2.4GHz computer radio control system with F-4G,T-FHSS SR / T-FHSS / S-FHSS and MiniZ modulation modes. The transmitter convinces with new design, new keypad and high quality carbon elements. New additions are some new buttons, 2- and 3-position switches and a rocker switch at the base of the transmitter.The Futaba T10PX comes with many new features that make the new RC-car radio flagship a very flexible transmitter.With 10 channels and many configuration options, the possible uses go far beyond those of a conventional car radio.From racer and drifter to crawler and boat to complex function models, everything is possible.Overview of the modulation types: F-4G, 10 channels / telemetry T-FHSS-SR, 4 channels T-FHSS, 4 channels / telemetry li> S-FHSS, 7 channels The new F-4G transmission protocol has been further improved compared to T-FHSS SR. Latency has been significantly reduced again and the range extended. At the same time, the receivers have become smaller.The optical center of the T10PX is the backlit 4.3 inch TFT color touch display with brilliant colors and high sharpness. Even in direct sunlight, all values on the display can be read excellently. The graphic user interface with the well-known easy to use Futaba menu structure, ensures easy operation. Navigation is intuitive via the screen and the additional buttons on the top of the transmitter.TELEMETRYSynchronized, bi-directional communication between transmitter and receiver with high telemetry data rate (up to 9 times per second), without loss of control channel response. Maximum of 31 telemetry sensors, alarm tone setting and output via beeper, vibration alert or voice output via internal speaker or optional headphones/active speaker. Telemetry data recording on SD card (SDHC) Telemetry data analysis via spreadsheet programs or LogView software Real-time display of telemetry data on integrated display Receiver signal strength indicator for monitoring the range Receiver undervoltage warning system for monitoring of the receiver battery Connection of up to 31 sensors to the S.BUS2 input S.BUS-TECHNOLOGY Connection option for S.BUS2 sensors All S.BUS servos can also be connected to normal servo outputs of the receiver Digital BUS technology for model sports Allows ideal placement of all components with efficient wire routing Future-proof, digital technology for all future Futaba components Features: Color LCD Touch Screen 4.3 Inch F4G System & Telemetry S-FHSS & T-FHSS Super Response (SR) Mode MiniZ S-FHSS 10 channels 40 models memory additional 3- and 2-step switches Brake mixer for large scale cars 4-wheel steering mixer Dual ESC mixer Mixer for track drives CPS LED mixer Gyro adjustment via T10PX microSD Slot (Data Log / Update) USB port Content of delivery Transmitter T10PX Receiver 404SBS Instruction manual DE/UK Accessories

€729.00*

Average rating of 0 out of 5 stars

7573/01 FG Receiver 2,4 GHz for FG-RS3
Genuine FG spare/option part. Contents:1 piece

€42.40*

Average rating of 0 out of 5 stars

SPMSLT300 Spektrum SLT3 3-Channel SLT Radio System with SR315 Dual Protocol
For first-time and cost-conscious RC drivers, the Spektrum SLT3 radio system provides the perfect foundation to begin exploring the advantages of Spektrum innovation and design expertise. Features Economical 3-channel Spektrum system delivers dependable control now and DSMR® upgrade potential for the future perfect for first-time drivers. Combines SLT 2.4GHz security with Spektrum design expertise for reliable, worry-free performance. Spektrum SR315 dual protocol receiver is compatible with SLT and DSMR® transmitters. Proven Spektrum ergonomic transmitter design provides comfortable, fatigue-free operation. User-adjustable features include steering and throttle trims, steering rate, and throttle limits. Includes a foam-covered steering wheel for no-slip control and mount for lanyard attachment. Whether you're a backyard basher, a crawling enthusiast, or a driver looking to get the most from a tight hobby budget, the 3-channel SLT3 transmitter with 2.4GHz SLT technology offers all you need for dependable, confident control. User-adjustable features include steering and throttle trims, steering rate, and throttle limits. The control layout is amazingly intuitive all controls are perfectly positioned to be quickly accessible when needed and out of the way when not in use.The SLT3 transmitter's overall low weight lets you drive all day without fatigue. Its steering wheel is foam-covered for a no-slip grip. There's also a handy mount for attaching a lanyard, so you can focus on driving without worrying about dropping and damaging your radio.The SR315 dual protocol receiver included with the SLT3 radio system not only supports the transmitter's SLT 2.4GHz technology but is also compatible with Spektrum DSMR® protocol. It's ready when you are for stepping up to next-level transmitters such as the DX5 Pro, DX5 Rugged, and DX5C. The receiver supports Spektrum Smart Technology, too paving the way for you to enjoy Smart connectivity advantages when using it with Smart transmitters, ESCs, and batteries.The SLT3 is much more than an economical 3-channel radio. Together with the included SR315 receiver, it's the most affordable radio system available that offers Spektrum quality range, response, and interference resistance while also laying the groundwork to upgrade later for superior DSMR® control and Smart connectivity. Its SLT protocol is compatible with the Spektrum SPMSLR300 (SLT Protocol Receiver) and legacy Tactic receivers, such as the TR325, that are included with some ready-to-run vehicles. SPEKTRUM SR315 DUAL PROTOCOL SLT/DSMR® RECEIVER The full-range SR315 receiver included with the SLT3 radio system has a compact design for easy installation into virtually any vehicle. Should you decide to upgrade your radio system in the future, this dual protocol receiver is already compatible with Spektrum DSMR® transmitters. SPEKTRUM TRANSMITTER ERGONOMICS The ergonomic design of the SLT3 transmitter provides a feel that any driver will appreciate. Its overall low weight allows all-day driving with minimal fatigue. The control layout is amazingly intuitive all controls are perfectly positioned to be quickly accessible when needed and out of the way when not in use. FOAM-COVERED STEERING WHEEL Drive with confidence! The SLT3 transmitter's foam-covered steering wheel is easy to grip for precise, no-slip control. LANYARD MOUNT A convenient mount is provided for lanyard attachment, letting you focus on driving without worrying about possibly dropping and damaging your radio.

€72.99*

Average rating of 0 out of 5 stars

FG Fun Cross WB535 4WD Buggy
This 1/6 scale 4WD Off-Road buggy has been strongly inspired by competition types. With its front and rear Leopard type suspensions, the Fun Cross allows the most extreme drives. Built on a 4mm aluminium chassis, closed belt drive, 2 differential gears, double wishbones at front and rear axle with many adjusting possibilities as well as large-volume oil-pressure shock absorbers for traction and optimal ground contact. The model is equipped with a powerful 26 cm³ combustion engine with tuning pipe and ready oiled air-filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The RTR version is delivered with assembled and preset 2.4 GHz radio control system and rechargeable batteries. To complete the non-RTR version are all popular servos and radio control systems are suitable. Equipment of the model:Powerful 26 cm³ engineTwo differentials4 mm thick chassisFour wheel independent suspensionsBig Bore dampersDimensions:Length: 700 mmWidth: 460 mmHeight: 310 mmWheelbase: 535 mmWeight: 10,4 kg

€1,049.95*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency