Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

6033 FG Wing mount

Product information "6033 FG Wing mount"

Genuine FG spare/option part.

For FG off road, stadium and monster models except Hummer.

Contents:
  • 2 pieces

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

60239 FG Plastic brace, 2 pcs.
Item N° 60239 Plastic brace, 2 pcs.Spare part for FG Off-Road Buggy for 2WD and 4WD.

€13.90*

Average rating of 0 out of 5 stars

6031 FG Roll cage, front loop
Genuine FG spare/option part. Front loop for roll cage, fits all FG off road cars except Leopard / Leopard race.Dimensions:Height 205 mmWidth 128 mmDiameter 10.6 mmContent:1 piece

€21.90*

Average rating of 0 out of 5 stars

68325/01, FG Servo saver spring blue
Springs with different hardnesses for servo saver item-no. FG 68420.Red = soft, for budget-priced RTR servos with plastic gear.Blue = medium, for high-quality competition servos.Content:1 piece

€6.90*

Average rating of 0 out of 5 stars

6011 FG Side guards left/right
Genuine FG spare/option part. Side guards suitable for Marder, Off-Road Buggy 2WD and 4WD body.Contents:2 pieces

€22.95*

Average rating of 0 out of 5 stars

66240 FG Alloy radio plate 4WD, 1 pce.
Item N° 66240 Alloy radio plate 4WD, 1 pce.

€29.95*

Average rating of 0 out of 5 stars

y1129 Mecatech hydraulic brake Expert for FG, Carson and many more, incl. brake bleeding set
Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all, necessary for installation, accessories (see also our pictures)One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline and E (in connection with alloy front uprights y0932Dimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set

From €199.90*

Similar products

Average rating of 0 out of 5 stars

6038 FG Engine mount washers for M4 and M4 screws
Genuine FG spare/option part. Washers for the screws (M4 / M5) that hold the engine mounts to the chassis. Suitable for all FG models.Dimensions:Outside diameter: 15 mmInside diameter: 6 mmContents:4 pieces

€6.50*

Average rating of 0 out of 5 stars

6029/08 FG Ball-and-socket joint for M8
Genuine FG spare/option part. Reinforced plastic ball-and-socket joints for M8 thread rods. Replacement for the plastic ball-and-socket joints 6029/01.Fits 10 mm balls, total length 39 mm.Contents:4 pieces

€12.90*

Average rating of 0 out of 5 stars

6041 FG Steel layshaft 10 mm
Genuine FG spare/option part. For all FG models except Formula 1.Dimensions:Length: 103 mmDiameter: 10 mmImportant:When installed in a Carson / Smartech model the brake hub is fastened with a screw stomach.Content:1 piece

€21.90*

Average rating of 0 out of 5 stars

6051 FG Dampening rubber
Genuine FG spare/option part. Rubber pucks for all standard design FG spur gear carriers.Dimensions:Outside diameter: 16 mmInner diameter: 7 mmHeight: 6 mmContents:4 pieces

€8.90*

Average rating of 0 out of 5 stars

6045/01 FG Brake shaft 97 with brake lever
Genuine FG spare/option part. For single disc brake only.Measures:Length: 91 mmDiameter: 6 mmThread: M3Contents:1 set

€13.90*

Average rating of 0 out of 5 stars

6030 FG Steel ball 10x10,75 mm
Genuine FG spare/option part. Steel ball with 4 mm bore.Contents:4 pieces

€12.90*

Average rating of 0 out of 5 stars

6034/01 FG Plastic part for stiffening brace
Genuine FG spare/option part. Necessary for installation of 6034.Dimensions:Length: 35 mmDiameter thicker part: 10 mmDiameter thin part: 76 mmThread: M4Contents:2 pieces

€4.90*

Average rating of 0 out of 5 stars

6029/04 Ball-and-socket joint 10mm for M6 adjustable - 4pcs.
Plastic socket for 10mm balls, fits M6 rods, adjustable.For all FG cars.

€12.90*

Average rating of 0 out of 5 stars

6037/01 FG Steel mounting plate - 2pcs.
Item N° 6037/01 Steel mounting plate - 2pcs.Connects the large engine mount to the engine flange on all FG cars except evo 04 / evo 07 / competition 07Bulk:large extent plate:length: 35 mmwidth: 10 mmheight: 2 mmsmall extent plate:length: 25 mmwidth: 10 mmheight: 2 mm

€8.90*

Average rating of 0 out of 5 stars

6042/01 FG Brake square 97
Genuine FG spare/option part. Stock aluminum version for single disc brake.Also available in hardened steel.Dimensions:Height: 14 mmBore: 10 mmSquare: 18 mmContents:1 piece

€10.90*

Average rating of 0 out of 5 stars

6028/01 FG Track rod left/right 74mm for 1:6 models
Genuine FG spare/option part. Fits all FG 1/6 off road cars, alloy version.Length of threaded section approx. 17 mm.Contents:2 pieces

€13.90*

Average rating of 0 out of 5 stars

6027 FG Ball-and-socket joint 6mm with ball
Genuine FG spare/option part. Plastic ball joint Fits all FG cars.Dimensions:Thread size: M4Länge: 20 mmBall bore: 3 mmHeight: 8 mmContents:6 pieces

€14.50*

Customers also viewed

Average rating of 0 out of 5 stars

6176 FG Dampening rubber for body support
Genuine FG spare/option part.Contents:4 pieces

€9.40*

Average rating of 0 out of 5 stars

10008 FG Formula 1 Competition 1/5
This model is fitted with numerous aluminium parts: front and rear side bulkheads, rockers, engine mount, suspension arm ends...Steel made Uniball sockets all possible enable all adjustments of the front and rear suspensions.The transmission made with a gearwheell drive offers outstanding reliability and smooth operation.Just like all other FG Competition models the FG Formula 1 Competition is the most successful model of the past years. The experiences we gained from numerous competitions have all influenced this version. The FG gearwheel drive which is extremely smooth running and cares for more power reserves. Surely FG Modellsport has created a competitive model for the next years with this version which will seamlessly follow up on the past successes. Highlights Alloy wishbones FG gearwheel drive Alloy rear axle plate FG alloy shock absorbers 04 Ball-bearing alloy servo saver 26 ccm Zenoah-Engine Airbox Tuned pipe Front- and rear brake 5 mm Chassis Lexan body shell Technical description of the FG Formula 1 Competition ki:The undercarriage of the FG Formula 1 Competition is built on an 5mm alloy chassis. All screws at the bottom of the chassis are countersunk.Front and rear axle mounts as well as the engine unit are connected over the complete length of the chassis, therefore we achieved almost the stiffness of a monocoque chassis. The quick fix system of the engine makes a fast changing of the engine possible. The drive to the rear axle is carried out over several easy-running front gearwheels and an FG ball drive at the rear axle. A separate flange bearing holds the clutch bell in order to relieve the crankshaft. Front and rear axle with their various adjusting possibilities as king pin angle, castor a.s.o. consist of alloy delta wishbones below. Solid alloy rear axle plates reduce the wear at the rear axle and give an enormous driving stability. 4 oil-pressure shock absorbers controlled by a pushrod suspension as well as stabilizers guarantee an optimal ground contact.We deliver the chassis selectively with tuning bowden cable brakes for front or respectively rear axle. The model is powered by a high-capacity 26 cm³ engine with airbox and Tuning pipe.Equipment of the FG Formula 1 Competition kitCNC-cut 5mm alloy chassis with lateral carbon fiber inserts, 26 cm³ engine, inlet silencer, Tuning pipe, FG gearwheel drive, ball drive, complete rear and front axle carrier unit with integrated engine quick-fixing device, double alloy wishbone fastenings, lower alloy delta wishbones at front and rear axle, front and rear alloy uprights, ball-bearing servo saver, steering stops, pushrods, 4 oil-pressure shock absorbers with alloy damper pistons, mechanical Tuning brakes at front and rear, stabilizer for front and rear axle, 10mm alloy balls, rear spoiler, polycarbonate body shell, polyamide front spoiler, receiver box, competition tires with tire inserts.We deliver the models as a kit including mounting instruction. The body parts are made of clear polycarbonate for your own painting. FG stickers and writings are enclosed.For the final assembly of the models you need further: radio control system (transmitter, receiver), 1 large steering servos (each approx. 40 - 50 kg), 2 servo for throttle brake (approx. 20 - 30 kg), batteries and charger.These parts are not included and must be supplied or ordered separately when the rc installation option is selected! Includet Zenoah 26cc engine Clear bodyshell and polycarbonate spoiler Mechanical brakesDimensions Length: 960mm Width: 440mm Height: 230mm Wheelbase: 620mm Formular 1 models in action!

€2,499.95*

Average rating of 0 out of 5 stars

60239 FG Plastic brace, 2 pcs.
Item N° 60239 Plastic brace, 2 pcs.Spare part for FG Off-Road Buggy for 2WD and 4WD.

€13.90*

Average rating of 0 out of 5 stars

33110 FG Body Monster-/ Stadium-Hummer H2, yellow for WB535
Genuine FG spare/option part.The bodyshell is made from colored polycarbonate. The decal set is not included!Dimension:Width between the edges on the front axle: approx. 260 mmWidth between the edges on the rear axle: approx. 280 mmWidth in the middle: approx. 280 mmLength: ca. 660 mmContents:1 piece

€189.90*

Average rating of 0 out of 5 stars

6033/01 FG Body support
Genuine FG spare/option part. Contents:1 piece

€11.50*

Average rating of 0 out of 5 stars

y0784/138 Painted Stadium Jeep body shell Camouflage
Defects:The body shell has several small scratches.Dimensions: Length approx. 670 mm Width approx. 300 mm Height approx. 225.mm Wheelbase approx. 470 mm

€259.90*

Average rating of 0 out of 5 stars

FG Monster Truck WB535 4WD HT-Edition
Our 4WD models are attractive and very popular. The wheelbase of the WB535 version is 40 mm longer. This modification improved the directional stability as well as further driving qualities significantly. Equipment of the modelAngled 4 mm alloy chassis with countersunk borings at the bottom, 4-wheel belt drive, belt drive cover, differential gear at front and rear axle with hardened bevel gearwheels, closed front axle housing, closed belt drive at the rear, adjustable double wishbones at front and rear axle, all driving parts and gearwheels made of case-hardened steel, adjustable servo saver, 4 adjustable oil-pressure shock absorbers, rear gear brake, alloy side plates, Monster tires with chrome-plated rims, polycarbonate body shell, decal set.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The model is equipped with a original 26 cm³ Chung-Yang (series engine) combustion engine with muffler and ready-for-use oiled filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-starter system the engine can be started without any difficulties.The pictures may display the car with some optional items which are not included, like bed-mounted rollbar, lights, front bumper or mirrors. These items can be added in the drop down menus.The RTR-version is delivered with assembled and preset radio control system and rechargeable batteries. to complete the non-RTR version all popular servos and radio control systems are suitable.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 46T - 48 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EURDimension:Length: 780 mmWidth: 510 mmHeight: 350 mmWheelbase: 535 mm

From €1,279.95*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency