Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

7203 FG alloy shock absorber 04 medium- 2pcs.

Product information "7203 FG alloy shock absorber 04 medium- 2pcs."

The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier.
Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark.
The shock absorber 2004 has an diameter of approx. 16mm. Suitable for all damper springs with approx. 17mm inside diameter.

With 130 mm hole distance.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

y1358 PTFE thread sealing tape, 12 mm wide, 10 m roll
Perfect for sealing threads.Resistant against almost all chemicals.Dimensions:Width: 12 mmThickness: 0.075 mmLength: 10 meters

€2.90*

Average rating of 0 out of 5 stars

y6092/01 Adapter set 20 mm shock springs on 16 mm shocks
With these adapter rings you can use springs with 20 mm inner diameter on shocks which are made for 16 mm springs.The set includes two each adapter rings with with the dimensions below and 20 mm spring perches #y6092.Dimensions:Inner diameter: approx. 16.10 mmFlange outer diameter: ca. 24.75 mmHub outer diameter: approx. 19.95 mmFlange height: approx. 1.55 mmOverall height: approx. 5.55 mm

€24.90*

Average rating of 0 out of 5 stars

y0038 Oil for shock absorber, all viscosities, 50 ml
Genuine silicone shock absorber oil for the optimal shock absorber set-up. Content: 50 ml Please note: Factory filling of FG/Losi/Smartech and many other 1/5 and 1/6 scale shocks is done with genuine silicone shock absorber oil. To ensure seal tightness and consistency you should only use genuine silicone shock absorber oil for refilling as well.Most every rc-car shock absorber uses silicone oil of different viscosities. The smaller the number, the lower the viscosity of the silicone oil and the softer the damping. As a rule of thumb: Viscosity 100 = similar to water Viscosity 1.000 = similar to cooking oil Viscosity 5.000 = similar to shampoo Viscosity 10.000 = similar to honey As a reference: The red FG Marder / Off-Road Buggy series shock absorbers are factory filled with 2.000 viscosity oil, the shocks on monster cars with dual shock set-ups (total of 8 shocks) are filled with 1.000 viscosity oil, and the shocks on FG onroad cars come filled with 4.000 viscosity oil. The original filling of the Losi 5ive-T is 350cc silicone oil.FG Silicone oil with 50 ml:FG Item N° 6510/010 = Viscosity: 100FG Item N° 6510/025 = Viscosity: 250FG Item N° 6510/035 = Viscosity: 350FG Item N° 6510/050 = Viscosity: 500FG Item N° 6510/075 = Viscosity: 750FG Item N° 6510/100 = Viscosity: 1000FG Item N° 6510/150 = Viscosity: 1500FG Item N° 6510/200 = Viscosity: 2000FG Item N° 6510/300 = Viscosity: 3000FG Item N° 6510/400 = Viscosity: 4000FG Item N° 6510/500 = Viscosity: 5000FG Item N° 6510/600 = Viscosity: 6000FG Item N° 6510/700 = Viscosity: 7000FG Item N° 6510/800 = Viscosity: 8000FG Item N° 6510/900 = Viscosity: 9000FG Item N° 6511 = Viscosity: 10000Viscosity of silicone oil at various temperatures.

Content: 50 Milliliter (€179.00* / 1000 Milliliter)

€8.95*
%

Average rating of 0 out of 5 stars

y0039 Oil for shock absorber, all viscosities, 100 ml
Genuine silicone shock absorber oil for the optimal shock absorber set-up. Content: 100 ml Please note: Factory filling of FG/Losi/Smartech and many other 1/5 and 1/6 scale shocks is done with genuine silicone shock absorber oil. To ensure seal tightness and consistency you should only use genuine silicone shock absorber oil for refilling as well.Most every rc-car shock absorber uses silicone oil of different viscosities. The smaller the number, the lower the viscosity of the silicone oil and the softer the damping. As a rule of thumb: Viscosity 100 = similar to water Viscosity 1.000 = similar to cooking oil Viscosity 5.000 = similar to shampoo Viscosity 10.000 = similar to honey As a reference: The red FG Marder / Off-Road Buggy series shock absorbers are factory filled with 2.000 viscosity oil, the shocks on monster cars with dual shock set-ups (total of 8 shocks) are filled with 1.000 viscosity oil, and the shocks on FG onroad cars come filled with 4.000 viscosity oil. The original filling of the Losi 5ive-T is 350cc silicone oil.FG Silicone oil with 100 ml:FG Item N° 66295/010 = Viscosity: 100 FG Item N° 66295/025 = Viscosity: 250FG Item N° 66295/035 = Viscosity: 350FG Item N° 66295/050 = Viscosity: 500FG Item N° 66295/075 = Viscosity: 750FG Item N° 66295/100 = Viscosity: 1000FG Item N° 66295/150 = Viscosity: 1500FG Item N° 66295/200 = Viscosity: 2000FG Item N° 66295/300 = Viscosity: 3000FG Item N° 66295/400 = Viscosity: 4000FG Item N° 66295/500 = Viscosity: 5000FG Item N° 66295/600 = Viscosity: 6000FG Item N° 66295/700 = Viscosity: 7000FG Item N° 66295/800 = Viscosity: 8000FG Item N° 66295/900 = Viscosity: 9000FG Item N° 66296 = Viscosity: 10000Viscosity of silicone oil at various temperatures.

Content: 100 Milliliter (€129.00* / 1000 Milliliter)

From €12.90* €15.40* (16.23% saved)

Average rating of 0 out of 5 stars

7201/01 FG Damper housing 04 medium - 1pce.
Suitable for .

€25.90*

Average rating of 0 out of 5 stars

6732/03 FG E-clip spring steel 3,2 mm
Genuine FG spare/option part. Part is delivered in silver or black color from vendor!Content:15 pieces

€2.90*

Average rating of 0 out of 5 stars

7087/01 FG Lower shock retaining short - 2pcs.
Spare part for , , and .

€4.30*

Average rating of 0 out of 5 stars

7087/02 FG Lower shock retaining long - 2pcs.
Spare part for , , , , , , , , and .

€4.50*

Average rating of 0 out of 5 stars

7088 FG Volume compensation for shock absorber
Genuine FG spare/option part. Ersatzteil zu:7083 FG Shock absorbers 97 short complete7200 FG alloy shock absorber 04 short7201 FG Alloy shock absorber 04 medium-short 7202 FG alloy shock absorber 04 medium-long 7203 FG alloy shock absorber 04 medium7204 FG alloy shock absorber 04 long Content:Two pieces

€4.70*

Average rating of 0 out of 5 stars

7089 FG Shock piston
Genuine FG spare/option part.Spare part for 7083, 7200, 7201, 7202, 7203, 7204.Dimensions:Outer diameter: 13.3 mmInner diameter: 4 mmContents:2 piece

€4.30*

Average rating of 0 out of 5 stars

7090 FG Shock piston shaft short - 1pce.
Spare part for , , , , , , , , , and .For race actions and also when using high viscous oils we recommend to mount the piston rods with fastening thread for the piston. Through tightening the piston a backlash-free connection with the piston rod is guaranteed. Mount the threaded piston rods only in connection with the alloy damper pistons.Length 55 mmDiameter 4 mmThread length 11 mmDistance between grooves 3.1 mm

€12.70*

Average rating of 0 out of 5 stars

7091 FG Shock piston shaft long - 1pce.
Spare part for , , , , , , , , and .Length 67 mmDiameter 4 mmThread length 11 mmDistance between grooves 3.1 mm

€15.50*

Average rating of 0 out of 5 stars

7092 FG Spring plate - 2pcs.
Spare part for , , , , and .Retainer diameter: 23 mmAccepts springs with approx. 16 mm inner diameterSlot for 4 mm shock shaft

€6.20*

Average rating of 0 out of 5 stars

7093 FG Silicone o-ring - 12pcs.
Inner diameter 4 mmThickness 2 mm

€6.90*

Average rating of 0 out of 5 stars

7095/01 FG O-ring for adjustable ring - 6pcs.
Spare part for , , , , and .

€5.70*

Average rating of 0 out of 5 stars

7201/02 FG Upper shock absorber seal 04 - 2pcs.
Suitable for .Bushings for 4 mm shock mounts.

€18.90*

Average rating of 0 out of 5 stars

7201/04 FG Lower shock absorber seal 04 - 2pcs.
Suitable for .

€13.10*

Average rating of 0 out of 5 stars

7201/05 FG Guiding set
Suitable for shocks with the FG order number: 7200, 7201, 7202, 7203, 7204.Dimensions (with flange):Inner diameter 4 mmOuter diameter 6 mmFlange diameter 8 mmWidth 2,5 mmDimensions (without flange):Outer diameter 7,7 mmWidth 1,6 mmContents:8 bushings with flange2 bushings without flange

€6.90*

Average rating of 0 out of 5 stars

7205/05 FG Plastic adjusting rings 16mm, 4 pcs.
Reasonably priced plastic adjusting rings for the FG shock absorbers with 16mm external thread. The plastic material prevents a seizing of the threads.Outer diameter 21.4 mmWidth 6 mm + 2 mm sleeve

€6.90*

Average rating of 0 out of 5 stars

7205/06 FG Plastic adjusting rings 16 mm
Genuine FG spare/option part.CNC-manufactured adjusting rings for the 16 mm FG shock absorbers with external thread. Inserted o-ring for securing. The use of plastic material prevents a jamming of the thread.Dimensions:Outer diameter: 22,4 mmWidth: 5 mm + 2 mm sleeveContents:2 pieces

€11.50*

Average rating of 0 out of 5 stars

10088 FG Lower damper mount for F1 - 2pcs.
Spare part for and .

€3.70*

Similar products

Average rating of 0 out of 5 stars

6084 FG Front shock absorber
Genuine FG spare/option part. Suitable on the front axle for all FG 1:6 buggy models.Dimensions:Mounting hole distance: 113 mmTravel: 26 mmDiameter: 20 mmFG factory fill is viscosity 2000 for Marder & Co. and 1000 for stadium / monster cars.RecommendationMarder & Co.: during winter viscosity 1000 - 1500, 1500 - 2000 for summerMonster / Stadium: For offroad use in the winter viscosity 700 - 900, for summer 900 - 1500; use a slightly higher viscosity for on-road useContents:1 piece

€20.60*

Average rating of 0 out of 5 stars

66293 FG Alloy shock absorber 08 short, 4 mm
Genuine FG spare/option part. Oil-pressure shock absorber Ø20 mm, short version, upper damper mount 4mm, spring adjustment ring, spring plate, various lower damper mounts. Suitable for the front axle of the models Marder and Beetle 2WD.Content:2 pieces

€58.95*

Average rating of 0 out of 5 stars

7202 FG alloy shock absorber 04 medium-long - 2pcs.
The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier. Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark. The shock absorber 2004 has an diameter of approx. 16 mm. Suitable for all damper springs with approx. 17 mm inside diameter.Installation length extended 129 mmTravel 38 mm

€73.90*

Average rating of 0 out of 5 stars

7200 FG alloy shock absorber 04 short
Genuine FG spare/option part. The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier. Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark. The shock absorber has an diameter of approx. 16 mm. Suitable for all damper springs with approx. 17 mm inside diameter .With 110 mm hole distance.Contents:2 pieces

€74.90*

Average rating of 0 out of 5 stars

66292 FG Alloy shock absorber 08 long, 4 mm - 2 pcs.
Item N° 66292 FG Alloy shock absorber 08 long, 4 mm - 2 pcs.Oil-pressure shock absorber Ø20mm, long version, upper damper mount 4 mm, spring adjustment ring, spring plate, various lower damper mounts. Suitable for the front axle of Off-Road Buggy 4WD, for the rear axle of Off-Road Buggy and Monster models 2WD.

€64.90*

Average rating of 0 out of 5 stars

66291 FG Alloy shock absorber 08 long, 5 mm - 2 pcs.
Oil-pressure shock absorber Ø20mm, long version, upper damper mount 5mm, spring adjustment ring, spring plate, various lower damper mounts. Suitable for the front axle of the 4WD Monster models and for the rear axle of Off-Road Buggy and Monster models 4WD.

€64.90*

Average rating of 0 out of 5 stars

67320 FG Aluminium shock absorber long, Ø24x210mm Leopard 2WD/4WD
Genuine FG spare/option part. Content:2 piecesLeopard 2WD/4WD shock absorber spare part list:

€126.95*

Average rating of 0 out of 5 stars

7204 FG alloy shock absorber 04 long
Genuine FG spare/option part.The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier. Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark. The shock absorber 2004 has an diameter of approx. 16 mm. Suitable for all damper springs with approx. 17 mm inside diameter. Installation length Extended: 139 mmTravel: 38 mmContents:2 pieces

€69.90*

Average rating of 0 out of 5 stars

7201 FG Alloy shock absorber 04 medium-short - 2pcs.
The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier. Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark. The shock absorber 2004 has an diameter of approx. 16mm. Suitable for all damper springs with approx. 17mm inside diameter .With 115 mm hole distance.

€74.70*

Average rating of 0 out of 5 stars

8522 FG Front shock absorber set short - 2pcs.
Shock absorber conversion kit for all 1:5 and 1:6 Ecoline models. Bulk oil-pressure shock absorber, experienced for years. Mounting hole distance: 113 mmTravel: 26 mmDiameter: 20 mmThe set contains 2 shock absorber with spring plate and spacer rings.

€51.90*

Average rating of 0 out of 5 stars

66294 FG Alloy shock absorber long 4 mm
Oil-pressure shock absorber Ø20mm, long version, upper damper mount 4 mm, spring adjustment ring, spring plate, various lower damper mounts. Suitable for the front axle of the 4WD Monster models and for the rear axle of Off-Road Buggy and Monster models 4WD.

€67.95*

Average rating of 0 out of 5 stars

67331 FG Big Bore shock absorbers Competition, fit on Leopard Competition chassis
Genuine FG spare/option part. Contents:2 piece

€128.50*

Customers also viewed

Average rating of 0 out of 5 stars

7201 FG Alloy shock absorber 04 medium-short - 2pcs.
The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier. Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark. The shock absorber 2004 has an diameter of approx. 16mm. Suitable for all damper springs with approx. 17mm inside diameter .With 115 mm hole distance.

€74.70*
%

Average rating of 0 out of 5 stars

SB132F/SB170R GPM Front and Rear Piggyback Shock absorbers for Super Baja Rey (incl. 2.0)
Original GPM Ersatz-/Tuningteil.Shock absorber for Super Baja Rey (incl. 2.0) with external volume compensation in all-metal design, spring perches and lower ball joints are also made of aluminum. Oversized 7 mm diameter piston rod. Dimensions springs front: 9 coils 2,5 mm wire thickness approx. 88 mm free length 24 mm inner diameter Mounting hole spacing: extended approx. 134 mm, compressed approx. 103 mm. Dimensions springs rear: 9 coils 2,5 mm wire thickness approx. 117 mm free length 24 mm inner diameter Mounting hole spacing: extended approx. 171 mm, compressed approx. 123 mm. Inhalt:2 pair / 4 pieces

€149.90* €199.80* (24.97% saved)

Average rating of 0 out of 5 stars

9505 FG Evo 2020.2 Race Kit 2WD-530 with body shell to choose
Competition-OnRoad RC car with the latest technical developments. Unique among the large scale models. New stabilizer bar construction front and rear. Ball stabiliszers or frame stabilizers can be used (accessories). 10 mm thick chassis made of T7075 aluminium with cut-outs for weights (also under the tank) and grooves in the front area. This allows the vehicle to be perfectly adapted to the track or the driver. The engine is now again bolted to the chassis for more stiffness. Optimally designed wishbones on front and rear suspension. Reinforced and with toe-in adjustability, which is performed via aluminum wedges. Front upper wishbone for more adjustment possibilities. All gears with fine pitch.Since 1997, i.e. since the beginning of the 1:5 RC car scene, FG Modellsport has been represented with team drivers worldwide at national and international competitions. With the Competition-EVO series, FG won most world championships and almost all European championships. Content Top suspension with 10 mm T7075 aluminum chassis plate Zenoah G230RC Engine Adjustable Tuning Clutch Air filter / Airbox Tuned pipe system Front and rear hydraulic brakes Differential Large volume shock absorbers, black anodized Wheels and rims Body shell to choose

€3,499.95*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency