7201 FG Alloy shock absorber 04 medium-short - 2pcs.

€69.95*

Available

Product number: fg_7201

EAN: 3410564515587

Product information "7201 FG Alloy shock absorber 04 medium-short - 2pcs."

The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier.
Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark.
The shock absorber 2004 has an diameter of approx. 16mm. Suitable for all damper springs with approx. 17mm inside diameter .

With 115 mm hole distance.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

y1358 PTFE thread sealing tape, 12 mm wide, 10 m roll

Perfect for sealing threads.Resistant against almost all chemicals.Dimensions:Width: 12 mmThickness: 0.075 mmLength: 10 meters

€2.90*

y6092/01 Adapter set 20 mm shock springs on 16 mm shocks

With these adapter rings you can use springs with 20 mm inner diameter on shocks which are made for 16 mm springs.The set includes two each adapter rings with with the dimensions below and 20 mm spring perches #y6092.Dimensions:Inner diameter: approx. 16.10 mmFlange outer diameter: ca. 24.75 mmHub outer diameter: approx. 19.95 mmFlange height: approx. 1.55 mmOverall height: approx. 5.55 mm

€24.90*

2011 Mecatech Big Bore Shocks

Genuine Mecatech spare/option part. The new Mecatech Big Bore shock absorbers with piggy back volume compensation reservoirs use normal silicone oil. The increased diameter in combination with the separate volume compensation via a floating piston of the new MecaTech Big Bore shocks allows for a very constant driving. This results in improved traction and optimized handling.The Big Bore shocks fit most 1/5 scale onroad cars.The outstanding craftsmanship guarantees a perfect seal; the shocks come w/o springs. The Big Bore shocks feature aluminum shock ends with replaceable bushings. Technical specifications: Total length: 120 mmDistance of mounting holes: 110 mm center/centerMounting hole diameter: 4.10 mmThickness of shock ends: 6 mmMax shock/spring travel: 30 mmWeight without oil: 46 g eachWeight without oil with spring: 68 g eachRecommended silicone oil:Mecatech recommends silicone oil with a viscosity of 6,000 to 8,000 for the front axle and 3,000 to 5,000 for the rear.Content:1 set

€175.00*

Details

y0038 Oil for shock absorber, all viscosities, 50 ml

Genuine silicone shock absorber oil for the optimal shock absorber set-up. Content: 50 ml Please note: Factory filling of FG/Losi/Smartech and many other 1/5 and 1/6 scale shocks is done with genuine silicone shock absorber oil. To ensure seal tightness and consistency you should only use genuine silicone shock absorber oil for refilling as well.Most every rc-car shock absorber uses silicone oil of different viscosities. The smaller the number, the lower the viscosity of the silicone oil and the softer the damping. As a rule of thumb: Viscosity 100 = similar to water Viscosity 1.000 = similar to cooking oil Viscosity 5.000 = similar to shampoo Viscosity 10.000 = similar to honey As a reference: The red FG Marder / Off-Road Buggy series shock absorbers are factory filled with 2.000 viscosity oil, the shocks on monster cars with dual shock set-ups (total of 8 shocks) are filled with 1.000 viscosity oil, and the shocks on FG onroad cars come filled with 4.000 viscosity oil. The original filling of the Losi 5ive-T is 350cc silicone oil.FG Silicone oil with 50 ml:FG Item N° 6510/010 = Viscosity: 100FG Item N° 6510/025 = Viscosity: 250FG Item N° 6510/035 = Viscosity: 350FG Item N° 6510/050 = Viscosity: 500FG Item N° 6510/075 = Viscosity: 750FG Item N° 6510/100 = Viscosity: 1000FG Item N° 6510/150 = Viscosity: 1500FG Item N° 6510/200 = Viscosity: 2000FG Item N° 6510/300 = Viscosity: 3000FG Item N° 6510/400 = Viscosity: 4000FG Item N° 6510/500 = Viscosity: 5000FG Item N° 6510/600 = Viscosity: 6000FG Item N° 6510/700 = Viscosity: 7000FG Item N° 6510/800 = Viscosity: 8000FG Item N° 6510/900 = Viscosity: 9000FG Item N° 6511 = Viscosity: 10000Viscosity of silicone oil at various temperatures.

Content: 50 Milliliter (€179.00* / 1000 Milliliter)

€8.95*

Details

y0039 Oil for shock absorber, all viscosities, 100 ml

Genuine silicone shock absorber oil for the optimal shock absorber set-up. Content: 100 ml Please note: Factory filling of FG/Losi/Smartech and many other 1/5 and 1/6 scale shocks is done with genuine silicone shock absorber oil. To ensure seal tightness and consistency you should only use genuine silicone shock absorber oil for refilling as well.Most every rc-car shock absorber uses silicone oil of different viscosities. The smaller the number, the lower the viscosity of the silicone oil and the softer the damping. As a rule of thumb: Viscosity 100 = similar to water Viscosity 1.000 = similar to cooking oil Viscosity 5.000 = similar to shampoo Viscosity 10.000 = similar to honey As a reference: The red FG Marder / Off-Road Buggy series shock absorbers are factory filled with 2.000 viscosity oil, the shocks on monster cars with dual shock set-ups (total of 8 shocks) are filled with 1.000 viscosity oil, and the shocks on FG onroad cars come filled with 4.000 viscosity oil. The original filling of the Losi 5ive-T is 350cc silicone oil.FG Silicone oil with 100 ml:FG Item N° 66295/010 = Viscosity: 100 FG Item N° 66295/025 = Viscosity: 250FG Item N° 66295/035 = Viscosity: 350FG Item N° 66295/050 = Viscosity: 500FG Item N° 66295/075 = Viscosity: 750FG Item N° 66295/100 = Viscosity: 1000FG Item N° 66295/150 = Viscosity: 1500FG Item N° 66295/200 = Viscosity: 2000FG Item N° 66295/300 = Viscosity: 3000FG Item N° 66295/400 = Viscosity: 4000FG Item N° 66295/500 = Viscosity: 5000FG Item N° 66295/600 = Viscosity: 6000FG Item N° 66295/700 = Viscosity: 7000FG Item N° 66295/800 = Viscosity: 8000FG Item N° 66295/900 = Viscosity: 9000FG Item N° 66296 = Viscosity: 10000Viscosity of silicone oil at various temperatures.

Content: 100 Milliliter (€154.00* / 1000 Milliliter)

From €14.90* €17.90* (16.76% saved)

Details

y0976 Alloy shock shaft end, long or short to choice

y7087/01 Alloy shock shaft end shortReplaces FG 7087/01.Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. Replaceable bushings.Dimensions:Length overall: 22,5 mm, about 17 mm to to center of bushingThread for shock shaft: M4Bushing inner diameter: 4 mmContents:2 piecesy7087/02 Alloy shock shaft end longGenuine HT spare/option part.Replaces FG 7087/02.Fits all FG shocks, Carson 2WD and many other 1/5 and 1/6 scale models. There are replaceable bushings.Dimensions:Length overall: 27 mm, about 22 mm to to center of bushingThread for shock shaft: M4Bushing inner diameter: 4 mmContents:2 pieces

€14.90*

Details

y19047/01 Alloy shock pistons for buggy shocks

Genuine HT spare/option part. O-ring piston for the red FG buggy shocks for optimum shock performance.These pistons cause almost no wear to the shock body. Because of this we recommend a break-in period of a couple of gas tanks for the shocks with the original piston to smoothen the body's surface. Then swap the pistons for the new o-ring piston. Doing so will give you the best results possible.Fits standard piston rods! Of course, piston rods are not included.Contents:4 pieces

€26.30*

7200/01 FG Damper housing 04 short - 1pce.

Suitable for . length 51mm

€25.90*

7201/01 FG Damper housing 04 medium - 1pce.

Suitable for .

€25.90*

6732/03 FG E-clip spring steel 3,2 mm

Genuine FG spare/option part. Part is delivered in silver or black color from vendor!Content:15 pieces

€2.90*

7087/01 FG Lower shock retaining short - 2pcs.

Spare part for , , and .

€4.50*

7087/02 FG Lower shock retaining long - 2pcs.

Spare part for , , , , , , , , and .

€4.70*

7088 FG Volume compensation for shock absorber

Genuine FG spare/option part. Ersatzteil zu:7083 FG Shock absorbers 97 short complete7200 FG alloy shock absorber 04 short7201 FG Alloy shock absorber 04 medium-short 7202 FG alloy shock absorber 04 medium-long 7203 FG alloy shock absorber 04 medium7204 FG alloy shock absorber 04 long Content:Two pieces

€4.90*

7089 FG Shock piston

Genuine FG spare/option part.Spare part for 7083, 7200, 7201, 7202, 7203, 7204.Dimensions:Outer diameter: 13.3 mmInner diameter: 4 mmContents:2 piece

€4.50*

7090 FG Shock piston shaft short - 1pce.

Spare part for , , , , , , , , , and .For race actions and also when using high viscous oils we recommend to mount the piston rods with fastening thread for the piston. Through tightening the piston a backlash-free connection with the piston rod is guaranteed. Mount the threaded piston rods only in connection with the alloy damper pistons.Length 55 mmDiameter 4 mmThread length 11 mmDistance between grooves 3.1 mm

€13.90*

7091 FG Shock piston shaft long - 1pce.

Spare part for , , , , , , , , and .Length 67 mmDiameter 4 mmThread length 11 mmDistance between grooves 3.1 mm

€15.90*

7092 FG Spring plate - 2pcs.

Spare part for , , , , and .Retainer diameter: 23 mmAccepts springs with approx. 16 mm inner diameterSlot for 4 mm shock shaft

€6.50*

7093 FG Silicone o-ring - 12pcs.

Inner diameter 4 mmThickness 2 mm

€6.90*

7095/01 FG O-ring for adjustable ring - 6pcs.

Spare part for , , , , and .

€5.70*

7201/02 FG Upper shock absorber seal 04 - 2pcs.

Suitable for .Bushings for 4 mm shock mounts.

€18.90*

7201/04 FG Lower shock absorber seal 04 - 2pcs.

Suitable for .

€12.95*

7201/05 FG Guiding set

Suitable for shocks with the FG order number: 7200, 7201, 7202, 7203, 7204.Dimensions (with flange):Inner diameter 4 mmOuter diameter 6 mmFlange diameter 8 mmWidth 2,5 mmDimensions (without flange):Outer diameter 7,7 mmWidth 1,6 mmContents:8 bushings with flange2 bushings without flange

€7.50*

7205/05 FG Plastic adjusting rings 16mm, 4 pcs.

Reasonably priced plastic adjusting rings for the FG shock absorbers with 16mm external thread. The plastic material prevents a seizing of the threads.Outer diameter 21.4 mmWidth 6 mm + 2 mm sleeve

€6.90*

7205/06 FG Plastic adjusting rings 16 mm

Genuine FG spare/option part.CNC-manufactured adjusting rings for the 16 mm FG shock absorbers with external thread. Inserted o-ring for securing. The use of plastic material prevents a jamming of the thread.Dimensions:Outer diameter: 22,4 mmWidth: 5 mm + 2 mm sleeveContents:2 pieces

€11.50*

10088 FG Lower damper mount for F1 - 2pcs.

Spare part for and .

€3.90*

Alternatives

2011 Mecatech Big Bore Shocks

€175.00*

Details

Customers also viewed

y1137/03 GPM-Big Bore Premium shock absorbers for FG Marder/Offroad Buggy 4WD, set

Set consists of 4 dampers. Premium version, suitable for FG, Carson / Smartech etc. Fully assembled and filled. Special features: 16 mm inner diameter for higher oil volume Volume equalisation Housing and screw connections made entirely of aluminium Hard anodised housing Precision piston made of Delrin, machined (no moulded part!) Aluminium piston rod base and aluminium spring plate Replaceable bearing bushes in the mounting eyes Pre-filled with 1000 silicone oil. For the following models: FG 4WD: Marder, Off-Road Buggy Set contents: Four long shock absorbers, one pair of shock absorbers has the upper mount with 5 mm bore. We recommend our progressive off-road tuning shock absorber springs from the "Dirt-Spring M" series, part number y0321, for the shock absorbers. The original springs can also be used on FG models! Silicone oil recommendation: The GPM-Spezial Cross shock absorbers are filled with silicone oil viscosity 1000. This viscosity provides very good damping properties at normal outside temperatures. If softer damping is required, oil with a viscosity of 500 or 600 is recommended; for harder damping, 1500 or higher is recommended. One 50 ml bottle of y0038 is sufficient for five long or six short dampers.

€149.90*

y0456 Mammoth Off-Road tires extra wide, on original FG stadium rim

y0456 Rubber compound: y0456/01 soft

Genuine HT spare/option part. Extra wide tire mounted and glued on genuine 1/6 scale FG Stadium Truck rims 6232/01.Diameter 165 mm, width 90 mm. Fits all FG and Carson largescale cars, may fit other cars with 18 mm wheel squares as well.Available in three different compounds:SoftMediumHardWe have tried various rubber / tire compounds for several months on various forms of terrain, etc.. The Mammoth brings, due to its quite strong and large pins and the extreme width of the tire, especially on hard and low grip surfaces a high traction! The Mammoth is available in soft, medium and hard! The rule is: the harder the ground the softer the tire compound. Where other tires spin helplessly the Mammoth provides serious traction. The disadvantage of Mammoth tires: Because of their extreme width they need to be mounted on FG wheels, which is a labor intensive job. From experience, we must strongly recommend against using rims from another manufacturer in combination with extension rings. Due to the before mentioned traction no other rim has been up to the task! Broken rims and torn squares were the result. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.However, the original FG-rim lasts without problems!Unit prices:Mammoth tires extra wide: 47,20 EUR / pairMammoth inserts extra wide: 9,70 EUR/ pairGenuine FG wide track rims 6232/01: 29,90 EUR / pairMounting + glueing rims / inserts / tires: 13,00 EURTotal: 99,80 EUR Contents:2 piecesAlso suitable for:With the following wheel adapter: y1183 Rim adapter

€89.90*

2011 Mecatech Big Bore Shocks

€175.00*

Details

7185 FG Damper spring 2,6mm violet, 2 pce.

Item N° 7185 Damper spring 2,6mm violet, 2 pce.Suitable for all FG shock absorbers and also for other makes with an outside diameter of 16mm.Measures:Length: 58 mmOutside diameter: 20 mmWire diameter: 2,6 mm

€16.90*

Original Zenoah engine to choose with carburetor and spark plug

y0557 Zenoah G230RC, with Walbro WT 603B carburetor (also available in the ball-raced version through the shop's options menu)23 cm³ Zenoah engine for large scale cars!The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch are optionally available at additional charge.y1009 Zenoah G240RC with Walbro WT 990 carburetor (also available in the ball-raced version through the shop's options menu)23 cm³ Zenoah engine for large scale cars!Please note: contrary to their new designation the displacement has not been increased! The outer dimension didn't change, so you don't need any additional parts for the engine swap!The engines feature the following improvements over their G230RC:- Quantity of cylinder mounting bolts increased from 2 to 4- Improved strength of crankcase- Added additional bearing on the PTO (clutch) side of crankshaft- Redesigned shape of cylinder fins- Dimension of air intake port is 5% widerContains internal fuel pump which increases acceleration from idle to wide open throttle.Removal of choke valve increases performance by increasing air flow to the carburetor - Changed material of the insulator gasket to metal, which improves sealing performanceThe engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch are optionally available at additional charge. y0553 Zenoah G260RC with Walbro WT 603B carburetor (also available in the ball-raced version through the shop's options menu)This is the G260 in the 26 cm³ version.The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch are optionally available at additional charge. y1011 Zenoah G270RC with Walbro WT 990 carburetor (also available in the ball-raced version through the shop's options menu)26 cm³ Zenoah engine for large scale cars!Please note: contrary to their new designation the displacement has not been increased! The outer dimension didn't change, so you don't need any additional parts for the engine swap!The engines feature the following improvements over their G260RC:- Quantity of cylinder mounting bolts increased from 2 to 4- Improved strength of crankcase- Added additional bearing on the PTO (clutch) side of crankshaft- Redesigned shape of cylinder fins- Dimension of air intake port is 5% wider- New carburetor (WT-990) Contains internal fuel pump which increases acceleration from idle to wide open throttle.Removal of choke valve increases performance by increasing air flow to the carburetor - Changed material of the insulator gasket to metal, which improves sealing performanceThe engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter are optionally available at additional charge. 7800 Zenoah G290RC with Walbro WT 990 carburetor (also available in the ball-raced version through the shop's options menu)Same dimensions as the Zenoah G230, G240, G260, G270.New generation Zenoah engine with 28,5ccm cylinder capacity and approx. 3.9 hp. The cylinder is fixed with 4 screws. The technical details are identical to the Zenoah engines G240RC and G270RC.The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch are optionally available at additional charge. Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise.Zenoah G320RC with Walbro WT 1107 carburetor (also available in the ball-raced version through the shop's options menu)With 32 cm³ and 30% more power than the Zenoah G290.Significantly more torque and higher stamina due to larger sized bearings all around, with Racing Carburetor Walbro WT 1107.The motor is supplied with WT-1107 carburetor and spark plug.SpecificationType: Two stroke gasoline engineDisplacement: 31,8 cm³Bore: 38 mmStroke: 28 mmWeight: 2,3 KgOverall Dimension:Length: 167 mmWidth: 215 mmHeight: 196 mmMaximum Output: 4,6 PSMaximum Torque: 2,00 N-mRotation Direction: CounterclockwiseCarburetor: Walbro WT-1107Spark plug: CMR7HStarting: Recoil starterFor all HPI Baja 5 cars the G320RCer clutch housing has to be shortened at the mounting base, for Losi 5ive- T and Desert Buggy XL cars the clutch housings overall length must be shortened to CY size.When installing the air filter you must pay attention to the length of the screws.For use on Losi and HPI we recommend M5x45 screws (like H94763); you can also cut existing screws to length, of course.When ordering with a modified clutch housing we will include these screws!In our shop you can select from Zenoah G320RC engines already modified to fit your HPI or Losi car.The installation of the Zenoah G320RC in other cars (like FG or Smartech buggies / monsters a.s.o.) is not even remotely straightforward, since the layshaft pinion (the small pinion in front of the big differential spur gear) is in the way for the larger Zenoah G320RC crankcase.Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise.

€259.00* €299.90* (13.64% saved)

Configure now

5175 FG Team decals Porsche GT3 RSR

Genuine FG spare/option part. Dimensions:510 x 480 mmContents:1 piece

€44.50*

Details

6118 FG Radio plate 04 for 1:6 models

Genuine FG spare/option part. Radio plate with a new design. Suitable for all FG 1:6 Off-Road models except Leopard. This set includes the battery mount.Contents:1 set

€25.90*