Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

6084 FG Front shock absorber

Product information "6084 FG Front shock absorber"

Genuine FG spare/option part.

Suitable on the front axle for all FG 1:6 buggy models.

Dimensions:
  • Mounting hole distance: 113 mm
  • Travel: 26 mm
  • Diameter: 20 mm


FG factory fill is viscosity 2000 for Marder & Co. and 1000 for stadium / monster cars.

Recommendation
  • Marder & Co.: during winter viscosity 1000 - 1500, 1500 - 2000 for summer
  • Monster / Stadium: For offroad use in the winter viscosity 700 - 900, for summer 900 - 1500; use a slightly higher viscosity for on-road use


Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Alternatives

Average rating of 0 out of 5 stars

y0514 GPM Shock-Cover for FG, Carson, Smartech, Conrad, set.
These protective covers prevent the shock piston rods and seals for wear caused by dirt. They fit most 1/6 and 1/5 scale shocks.Not suitable for Gas Devil, Thunderbolt, Helldevil, CRT 4x4!- total length 150 mm for all FG / Carson / Smartech / Conrad and all dampers with a diameter from 22 to 30 mm. Set of 4

€14.90*

Accessories / Spare parts

Average rating of 0 out of 5 stars

y0324 Off-Road tuning spring Dirt-Spring M0
Genuine HT spare/option part. Progressive tuning springs, will fit the standard red and the thick silver shocks on FG offroad cars. All springs have an inner diameter of 21 mm.Available in several versions.For the front on FG buggies:y0324/01 - M01, 2,1 x 60 mm, yellowy0324/02 - M02, 2,2 x 60 mm, orangey0324/03 - M03, 2,3 x 60 mm, redy0324/04 - M04, 2,4 x 60 mm, purpley0324/05 - M05, 2,5 x 60 mm, blueContent:2 pieces

€17.90*

Average rating of 0 out of 5 stars

y0038 Oil for shock absorber, all viscosities, 50 ml
Genuine silicone shock absorber oil for the optimal shock absorber set-up. Content: 50 ml Please note: Factory filling of FG/Losi/Smartech and many other 1/5 and 1/6 scale shocks is done with genuine silicone shock absorber oil. To ensure seal tightness and consistency you should only use genuine silicone shock absorber oil for refilling as well.Most every rc-car shock absorber uses silicone oil of different viscosities. The smaller the number, the lower the viscosity of the silicone oil and the softer the damping. As a rule of thumb: Viscosity 100 = similar to water Viscosity 1.000 = similar to cooking oil Viscosity 5.000 = similar to shampoo Viscosity 10.000 = similar to honey As a reference: The red FG Marder / Off-Road Buggy series shock absorbers are factory filled with 2.000 viscosity oil, the shocks on monster cars with dual shock set-ups (total of 8 shocks) are filled with 1.000 viscosity oil, and the shocks on FG onroad cars come filled with 4.000 viscosity oil. The original filling of the Losi 5ive-T is 350cc silicone oil.FG Silicone oil with 50 ml:FG Item N° 6510/010 = Viscosity: 100FG Item N° 6510/025 = Viscosity: 250FG Item N° 6510/035 = Viscosity: 350FG Item N° 6510/050 = Viscosity: 500FG Item N° 6510/075 = Viscosity: 750FG Item N° 6510/100 = Viscosity: 1000FG Item N° 6510/150 = Viscosity: 1500FG Item N° 6510/200 = Viscosity: 2000FG Item N° 6510/300 = Viscosity: 3000FG Item N° 6510/400 = Viscosity: 4000FG Item N° 6510/500 = Viscosity: 5000FG Item N° 6510/600 = Viscosity: 6000FG Item N° 6510/700 = Viscosity: 7000FG Item N° 6510/800 = Viscosity: 8000FG Item N° 6510/900 = Viscosity: 9000FG Item N° 6511 = Viscosity: 10000Viscosity of silicone oil at various temperatures.

Content: 50 Milliliter (€179.00* / 1000 Milliliter)

€8.95*
%

Average rating of 0 out of 5 stars

y0039 Oil for shock absorber, all viscosities, 100 ml
Genuine silicone shock absorber oil for the optimal shock absorber set-up. Content: 100 ml Please note: Factory filling of FG/Losi/Smartech and many other 1/5 and 1/6 scale shocks is done with genuine silicone shock absorber oil. To ensure seal tightness and consistency you should only use genuine silicone shock absorber oil for refilling as well.Most every rc-car shock absorber uses silicone oil of different viscosities. The smaller the number, the lower the viscosity of the silicone oil and the softer the damping. As a rule of thumb: Viscosity 100 = similar to water Viscosity 1.000 = similar to cooking oil Viscosity 5.000 = similar to shampoo Viscosity 10.000 = similar to honey As a reference: The red FG Marder / Off-Road Buggy series shock absorbers are factory filled with 2.000 viscosity oil, the shocks on monster cars with dual shock set-ups (total of 8 shocks) are filled with 1.000 viscosity oil, and the shocks on FG onroad cars come filled with 4.000 viscosity oil. The original filling of the Losi 5ive-T is 350cc silicone oil.FG Silicone oil with 100 ml:FG Item N° 66295/010 = Viscosity: 100 FG Item N° 66295/025 = Viscosity: 250FG Item N° 66295/035 = Viscosity: 350FG Item N° 66295/050 = Viscosity: 500FG Item N° 66295/075 = Viscosity: 750FG Item N° 66295/100 = Viscosity: 1000FG Item N° 66295/150 = Viscosity: 1500FG Item N° 66295/200 = Viscosity: 2000FG Item N° 66295/300 = Viscosity: 3000FG Item N° 66295/400 = Viscosity: 4000FG Item N° 66295/500 = Viscosity: 5000FG Item N° 66295/600 = Viscosity: 6000FG Item N° 66295/700 = Viscosity: 7000FG Item N° 66295/800 = Viscosity: 8000FG Item N° 66295/900 = Viscosity: 9000FG Item N° 66296 = Viscosity: 10000Viscosity of silicone oil at various temperatures.

Content: 100 Milliliter (€129.00* / 1000 Milliliter)

From €12.90* €15.40* (16.23% saved)

Average rating of 0 out of 5 stars

6094/01 FG Damper spring rear 2,2 x 100 mm
Genuine FG spare/option part. Suitable for 6083 and 6481.Dimensions:Length: 100 mmWire diameter: 2,2 mmOuter diameter: 25 mmContents:1 piece

€7.90*

Average rating of 0 out of 5 stars

6094/02 FG Damper spring 2x100 mm
Genuine FG spare/option part. Suitable for 6083 and 6481.Dimensions:Length: 100 mmWire diameter: 2 mmOuter diameter: 25 mmContents:1 piece

€7.90*

Average rating of 0 out of 5 stars

6095 FG Damper spring front
Genuine FG spare/option part.Suitable for 6084 and 6480.Dimensions:Length: 80 mmWire diameter: 2,2 mmOuter diameter: 25 mm Contents:1 piece

€7.95*

Average rating of 0 out of 5 stars

6095/01 FG Damper spring front 2,2x61 mm
Genuine FG spare/option part. Suitable for 6084 and 6480.Maße:Length: 61 mmWire diameter: 2,2 mmOuter diameter: 25 mm Contents:1 piece

€7.95*

Average rating of 0 out of 5 stars

6095/02 FG Damper spring 2x60 mm
Genuine FG spare/option part. Suitable for 6084 and 6480.Dimensions:Length: 60 mmWire diameter: 2 mmOuter diameter: 25 mm Contents:1 piece

€7.95*

Customers also bought

Average rating of 0 out of 5 stars

6092 FG Spring plate
Genuine FG spare/option part. Spare part for 6083, 6084, 6481 and 6482. Contents:2 pieces

€6.70*

Average rating of 0 out of 5 stars

6098 FG Front bulkhead B
Genuine FG spare/option part. Suitable for all 1:6 models except Race-Trucks as well as LeopardContents:1 piece

€13.50*

Similar products

Average rating of 0 out of 5 stars

66293 FG Alloy shock absorber 08 short, 4 mm
Genuine FG spare/option part. Oil-pressure shock absorber Ø20 mm, short version, upper damper mount 4mm, spring adjustment ring, spring plate, various lower damper mounts. Suitable for the front axle of the models Marder and Beetle 2WD.Content:2 pieces

€58.95*

Average rating of 0 out of 5 stars

66294 FG Alloy shock absorber long 4 mm
Oil-pressure shock absorber Ø20mm, long version, upper damper mount 4 mm, spring adjustment ring, spring plate, various lower damper mounts. Suitable for the front axle of the 4WD Monster models and for the rear axle of Off-Road Buggy and Monster models 4WD.

€67.95*

Average rating of 0 out of 5 stars

7202 FG alloy shock absorber 04 medium-long - 2pcs.
The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier. Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark. The shock absorber 2004 has an diameter of approx. 16 mm. Suitable for all damper springs with approx. 17 mm inside diameter.Installation length extended 129 mmTravel 38 mm

€73.90*

Average rating of 0 out of 5 stars

8522 FG Front shock absorber set short - 2pcs.
Shock absorber conversion kit for all 1:5 and 1:6 Ecoline models. Bulk oil-pressure shock absorber, experienced for years. Mounting hole distance: 113 mmTravel: 26 mmDiameter: 20 mmThe set contains 2 shock absorber with spring plate and spacer rings.

€51.90*

Average rating of 0 out of 5 stars

67331 FG Big Bore shock absorbers Competition, fit on Leopard Competition chassis
Genuine FG spare/option part. Contents:2 piece

€128.50*

Average rating of 0 out of 5 stars

7201 FG Alloy shock absorber 04 medium-short - 2pcs.
The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier. Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark. The shock absorber 2004 has an diameter of approx. 16mm. Suitable for all damper springs with approx. 17mm inside diameter .With 115 mm hole distance.

€74.70*

Average rating of 0 out of 5 stars

7203 FG alloy shock absorber 04 medium- 2pcs.
The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier. Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark. The shock absorber 2004 has an diameter of approx. 16mm. Suitable for all damper springs with approx. 17mm inside diameter.With 130 mm hole distance.

€72.50*

Average rating of 0 out of 5 stars

67330 FG Aluminium shock absorber short, Ø24x168mm Leopard 2WD/4WD
Genuine FG spare/option part. Spare part for the Leopard 2WD/4WD 2010 version.Contents:1 pieceLeopard 2WD/4WD shock absorber spare part list:

€122.50*

Average rating of 0 out of 5 stars

7206 FG Damper Evo 2020
Genuine FG spare/option part. Contents:2 pieces

€107.95*

Average rating of 0 out of 5 stars

67615 FG Big Bore front Shock Absorber Leopard 2020 4WD
Genuine FG spare/option part. Contents:1 set

€177.50*

Average rating of 0 out of 5 stars

66292 FG Alloy shock absorber 08 long, 4 mm - 2 pcs.
Item N° 66292 FG Alloy shock absorber 08 long, 4 mm - 2 pcs.Oil-pressure shock absorber Ø20mm, long version, upper damper mount 4 mm, spring adjustment ring, spring plate, various lower damper mounts. Suitable for the front axle of Off-Road Buggy 4WD, for the rear axle of Off-Road Buggy and Monster models 2WD.

€64.90*

Average rating of 0 out of 5 stars

66291 FG Alloy shock absorber 08 long, 5 mm - 2 pcs.
Oil-pressure shock absorber Ø20mm, long version, upper damper mount 5mm, spring adjustment ring, spring plate, various lower damper mounts. Suitable for the front axle of the 4WD Monster models and for the rear axle of Off-Road Buggy and Monster models 4WD.

€64.90*

Customers also viewed

Average rating of 0 out of 5 stars

8522 FG Front shock absorber set short - 2pcs.
Shock absorber conversion kit for all 1:5 and 1:6 Ecoline models. Bulk oil-pressure shock absorber, experienced for years. Mounting hole distance: 113 mmTravel: 26 mmDiameter: 20 mmThe set contains 2 shock absorber with spring plate and spacer rings.

€51.90*

Average rating of 0 out of 5 stars

8523 FG Rear shock absorber set long - 2pcs.
Shock absorber conversion kit for all 1:5 and 1:6 Ecoline models. Bulk oil-pressure shock absorber Ø20mm, experienced for years. The set contains 2 shock absorber with spring plate and spacer rings.

€55.00*

Average rating of 0 out of 5 stars

66293 FG Alloy shock absorber 08 short, 4 mm
Genuine FG spare/option part. Oil-pressure shock absorber Ø20 mm, short version, upper damper mount 4mm, spring adjustment ring, spring plate, various lower damper mounts. Suitable for the front axle of the models Marder and Beetle 2WD.Content:2 pieces

€58.95*

Average rating of 0 out of 5 stars

305030 shock absorbers rear, Comanche / Attack Evo
cs_305030 Springs: Attack Evo
Genuine Smartech spare/option part.Please note: Color and design of Smartech springs and shock bodies may vary from batch to batch.Dimensions:Mounting hole distance: 127 mmTravel: 30 mmDiameter: 16 mmContent:2 pieces

€62.30*

Average rating of 0 out of 5 stars

FG 6483/02 Shock absorber housing, long, 1 piece
Original FG spare part  Suitable for shock absorber FG 66295.  1 piece

€21.80*

Average rating of 0 out of 5 stars

FG Sportsline 2WD-530 Electric BMW M4 up to 200A/8S
The FG Touring and Sports cars at scale 1:5 are known for their high quality and very detailed bodyshells true to original. Also the technically fully developed chassis are worth mentioning. These models are now available with a high-torque brushless engine. Surface conditions with maximum grip assumed speeds above 100 km/h can be reached and steered controlled.The E stands for electric power and means extremely high torque, high top speed and all without motor noise. The Sportsline models are equipped with a powerful brushless motor and a brushless speed controller. The controller can be easily adjusted via the transmitter or optionally via a programming card or, depending on the equipment, via a mobile phone app.The unpainted version does not include a decal sheet! T2M standard equipment brushless motor and ESC:  - ESC 150A controller 6S  - Brushless motor 6SYou can order a motor/ESC combination with 8S for an additional charge.- ESC 200A, 3-8S LiPo, BEC 8A - Brushless Motor 8SYou can select the car with complete RTR-equipment from the options menu. RTR equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. All E-Power versions need for the final assembling LiPo batteries and the suitable charger. For an unproblematic mounting we recommend to use LiPo batteries with a max. length 150mm and a width of 50mm. The model is delivered with an EC8 connector system.

From €1,099.95*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency