3000-24 Mecatech Brakedisk steel/epoxy
€9.90
Currently unavailable
Product information "3000-24 Mecatech Brakedisk steel/epoxy"
Replacement part for Mecatech Cross Hydro. Epoxy or steel to choiser.
Dimensions:
- Strength: 1,5 mm
- Outside diameter: 64 mm
![]() | ![]() |
Content:
- 1 piece
0 of 0 reviews
Average rating of 0 out of 5 stars
Login
Customers also bought
Genuine HT spare/option part.The set includes uprights, steering arm, alloy stoppers, screws.Suitable for touring cars, 530/535 mm weelbaseContents:1 set For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.https://rc-car-online.de/en-ersatzteile_main,15.html
Replacement part for Mecatech Cross Hydro. Content:1 piece / 50 ml
Content: 50 Milliliter (€154.00 / 1000 Milliliter)
Genuine rc-car-online spare/option part.The optimal parking lot or race tires for your FG Racetruck model.Type Width Outer diameterFront 64 mm 153 mmRear 78 mm 153 mmGlued on original FG-Racetruck rims (rear tire with extension to the inside), incl. foam rubber insert,FG rim with 18 mm square drive and reinforcement ring.Attention: From experience we warn against using rims and extensions from another manufacturer.Since the Mammoth tires provide a very good grip, the rim and bonding are extremely stressed. Due to the high torque load in relation to the bonding of tires on large models, an occasional check in this regard and possibly a repair of the bonding (y0067) is inevitable.As a recommendation:The dirtier the track or the colder the temperature, the softer the rear tire should be.Reference for the front tire: With 2WD models this should be one to two stages harder than the used rear tire. On 4WD models, a tire combination with the same shore hardness front and rear is often good to drive.Of course, with Mammoth Supergrip Racetruck tires, the softer the tire, the higher the wear.The Mammoth Supergrip Racetruck tires have a special onroad tread. Whereby these still have an optimal grip after the wear of the tread, and can still be driven for a long time.
Angle connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Connecting thread M5
Replacement part for Mecatech Expert and Cross Hydro.
Customers also viewed
Genuine FG spare/option part. Brake discs for the old twin disc setup.Dimensions:Diameter: 36 mmSquare size: 15 mmContents:2 pieces
Genuine Mielke spare/option part. Fits FG Evo / RS 5 Tourenwagen / Harm SX 3 / Losi 5ive / Losi DBXL / HPI Baja.Backwards installedshoes make this clutch a "Converse" clutch!After many successes with the "normal" Power Gearshift clutch this is the next step.Made of high-strength aluminium 7075-T6! All components, including the pads, are manufactured on precision machines.Contents:1 piece
PRM premium quality epoxy brake discs Material thickness is reduced for 0.1 mm to absorb tire debris or dirt easier!Dimensions: Outer diameter: 64 mmInternal dimension: 18 mm (square)Material thickness: 1,8 mm Suitable for:3002 Crosshydro hydraulic brake1001 Mecatech twin piston hydraulic brakeContent:2 Pieces
Y-connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.
Dimensions: Diameter: 69 mm Material thickness: 1,6 mm
PRM premium quality epoxy brake discs. Material thickness is reduced for 0.1 mm to absorb tire debris or dirt easier!Dimensions: Outer diameter: 64 mmInternal dimension: 18 mm (square)Material thickness: 1,8 mm Suitable for:3002 Crosshydro hydraulic brake1001 Mecatech twin piston hydraulic brake FG Evo2020Content:2 Pieces
Genuine replacement part for Mecatech Expert.Dimensions: Outer diameter: 69 mmInternal dimension: 18 mm (square)Material thickness: 1,8 mm Content:2 pieces

