3000-22 Mecatech Brakeline 1 meter, 1 pce.

€4.90*

Prices incl. VAT plus shipping costs

Available

Product number: mec_3000_22

EAN: 4058575028727

Product information "3000-22 Mecatech Brakeline 1 meter, 1 pce."

Replacement part for Mecatech Expert and Cross Hydro.

Dimensions:
Inner diameter: 2.7 mm
Outer diameter: 4 mm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Alternatives

Mecatech brake line 2.7x4 for Expert / Crosshydro, y1176, 1 m

Brake line 2.7 x 4 mm, especially for Mecatech Expert and Crosshydro brakes.

€5.90*

Similar products

3000-37 Mecatech valve cover, 6 pcs.

Replacement part for Mecatech Expert and Cross Hydro.Inner diameter of eylet and cap: 4 mmLength: 21 mm

€9.90*

This product is no longer available.

3000-23 Mecatech Bottle oil 50 ml

Genuine Mecatech spare/option part. Replacement part for Mecatech Cross Hydro. Content:1 piece / 50 ml

Content: 50 Milliliter (€154.00* / 1000 Milliliter)

€7.70*

Details

3000-38 Mecatech brake calliper complete, 1 piece

Product information "3000-38 Mecatech brake calliper complete, 1 piece" Original Mecatech spare part. Mecatech Expert brake caliper complete with all connections, 1 piece. Suitable for FG steering knuckle (not Evo 2020 models), Can be used on the right and left

€89.90*

Details

3000-36 Mecatech Expert brake pad, steel

Genuine Mecatech spare/option part. Fits Mecatech expert.Content:4 pieces

€49.90*

Details

3000-05 Mecatech Bushing for Mastercylinder, 1 pce.

Replacement part for Mecatech Expert and Cross Hydro

€4.90*

3000-02 Mecatech Bleeding valve, 2 pce.

Replacement part for Mecatech Expert and Cross Hydro

€17.90*

3000-24 Mecatech Brakedisk steel/epoxy

mec_3000_24 Material: Epoxy

Genuine Mecatech spare/option part. Replacement part for Mecatech Cross Hydro. Epoxy or steel to choiser.Dimensions: Strength: 1,5 mm Outside diameter: 64 mmContent:1 piece

€9.90*

3000-06 Mecatech seals for for piston/master cylinder - set

€5.50*

3000-07 Mecatech Piston for Mastercylinder, 1 pce.

Replacement part for Mecatech Expert and Cross Hydro

€6.90*

3000-03 Mecatech Pins, set

Replacement part for Mecatech Expert and Cross Hydro

€3.60*

3000-21 Mecatech T-Connector

Genuine Mecatech spare/option part. Replacement part for Mecatech Cross Hydro. Content:1 piece

€21.90*

3000-04 Mecatech Spring for Mastercylinder, 2 pce.

Replacement part for Mecatech Expert and Cross Hydro

€2.90*

Customers also viewed

Mecatech brake line 2.7x4 for Expert / Crosshydro, y1176, 1 m

Brake line 2.7 x 4 mm, especially for Mecatech Expert and Crosshydro brakes.

€5.90*

y3000-23 Mecatech Bottle oil 50 ml

Replacement part for Mecatech Cross Hydro. Content:1 piece / 50 ml

Content: 50 Milliliter (€154.00* / 1000 Milliliter)

€7.70*

y1436 SPEED TEC CRANK Ignition-System (CIS)

y1436 Tools: y1436/01 Assembly wrench+ 29.9EUR

New ignition system for RC Car race engines with air baffles, special 62 mm balanced flywheel, modified ignition coil mount and special Löhin tuning ignition (#1361). For Zenoah G230/240/260/270/290/320 und CY / Fuelie / Losi engines.A much smaller and lighter flywheel, in conjunction with the special air baffles, ensures that the engine gets more cooling air then with previously available modified flywheels! The fan from the CIS-ignition with fins on both sides is about 30% lighter (!) than the stock version! Needless to say an engine equipped with such a flywheel revs considerably faster and significantly higher, of course. This in itself is nothing new, because modified flywheels, even though not 30% lighter, are pretty common on modified engines. However, the problem with these modified flywheels is maintaining sufficient cooling for the engine, which is absolutely mandatory for a reliably running engine! The 20% smaller in diameter flywheel is primarily responsible for the very substantial performance increase by the SPEED TEC CRANK ignition . The lower inertia, which is quite crucial for engine performance, allows for an extremely fast and higher revving engine! The air baffles of the CIS-ignition ensure that the path of the cooling air is matched to the reduced diameter of the CIS-fan wheel and the engine gets more cooling! As our product video shows, the stock engine gained near 2,000 rpm through installation of the SPEED TEC CIS-ignition ! But perhaps the optimized torque is even more convincing. This for 30% reduced and 20% more centrally positioned flywheel mass gives your engine a stunning power increase. Other benefits of SPEED TEC CIS - ignition system: Fits all Zenoah, as well as HPI, Losi-, CY 1/5 & 1/6 engines (incl. Zenoah G320) No modifications to the cylinder or the ignition coil mount required! No assembly of the flywheel, thus 100% exact fit and running true The enclosed Löhin ignition system is designed for speeds up to 25,000 rpm! The baffles protect the flywheel from debris (stones, etc.) Complete with Löhin ignition and all necessary parts in a nice special bag Easy installation: Remove the stock ignition system - install the CIS-ignition - done! The color of the ignition cable and the spark plug cap may vary.

Variants from €329.00*

€358.90*

y0305 Colored flexible fuel line, top quality, 1 meter

y0305 Color: y0305/06 - Orange

High quality flexible fuel line in your choice of blue, red, yellow, orange and green. Size:Length: approx. 1 meterOuter diameter: approx. 6.3 mmInner diameter: approx. 3.2 mmDiameters are 100% identical to the Zenoah Tygon hose #7352!

€5.90*

9452/02 FG Filling and ventilation set

Genuine FG spare/option part. Spare part 9440.

€4.70*

94735 HPI Countersunk allen head screw M5 x 30 mm

Genuine HPI spare/option part. Dimensions: M4 x 30 mm, 3,0 mm with allen head.Part is delivered in silver or black color from vendor!Contents:6 piece

€3.00*

Mielke 5743 Power Gearshift clutch for FG (not for Formel 1+Evo2020) Harm, RS5, HPI and Losi, Carbon, 2mm springs with long clutch carrier

Genuine Mielke spare/option part. For offroad vehicles, less Grip or rain use.The new adjustable system features three carbon pads with special 2.0 mm springs.Weight of the complete clutch is 70 grams. Very wear resistent when running with the recommended clutch bells.Adjustable friction points: First gear - 8.500 U/min. Second gear - 9.300 U/min. Third gear - 10.100 U/min. Fourth gear - 11.000 U/min.With tool #5445 the engagement speed can be adjusted to different settings within a range from about 8,500 to 11,000 rpm. Contents:1 piece

€129.50*