y1467 Full body shell installation kit with 10.9 screws for Losi 5ive-T/2.0 and Mini

rc-car-online

€32.41*

Prices incl. VAT plus shipping costs

Available

y1467 Version

Product number: y1467.3

EAN: 4058575073093

Product information "y1467 Full body shell installation kit with 10.9 screws for Losi 5ive-T/2.0 and Mini"

26 pieces of mounting washers
22 pieces of support plates
14 pieces of countersunk screws (DIN7991) Allen head M4 x 20, 10.9 grade
- Alternatively TX10 Torx head, 10.9 grade
12 pieces countersunk screws (DIN7991) Allen head M4 x 16, 10.9 grade
- Alternatively TX10 Torx head, 10.9 grade

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Customers also bought

AT-5T028 ATOP Aluminum radio plate Losi 5ive-T 1.0 and 2.0 for dual steering servos

Genuine ATOP spare/option part. CNC machined 6061-T6 aluminum radio plate from ATOP, fits Losi 5ive-T 1.0 and 2.0.This all-aluminum unit allows for installation of dual steering servos. The servo hole patterns are suitable for Losi original servos / servos with the size of 900S and K-Power.The box for the receiver battery has internal dimensions of 142 x 65 x 32 mm.Available with additional genuine Losi S900S 5ive-T steering servo incl- Y-harness in the options menu.Contents:1 piece

€169.90*

AREA-BJ047 Reed valve block V2 for Zenoah G320

This reed valve system converts a normal piston-port engine into a reed valve engine. It offers the advantage of increased intake duration for a better charge for more power. As a positive side effect no fresh gas loss occurs during the downward movement of the piston because the membranes close this path.The reed valve block replaces the usual stock insulator. To use the advantage of the reed system, it is necessary to modify the piston skirt on the intake side. Depending on the engine it is advantageous for best results, to slightly match the cylinders intake port to the Epoxy insulator plate at the bottom of the reed valve system. Both steps are described in the installation instructions for Zenoah and Chung Yang engines. Our thanks for these instructions go to our customer Thomas Hoenicke.Note: For the time being the epoxy insulator plate must be slightly reworked to fit a G320 Zenoah engine. The manual has been written with the conversion of a G320, the affected area for modification is therefore shown.The unit is 24.5 mm high.

€79.90*

AT-AT001 ATOP Colored high flow fuel line with connections and accessories for Losi 5ive-T/2.0/B, Mini and HPI models

at_at001 Color: AT-001/02 - Red

Genuine Atop spare/option part. Colored fuel hose with clams and suction tubesArea Rc High flow fuel line kit.This high flow fuel line kit fits the HPI Baja series and the Losi 5ive-T/B and Mini. It may fit other large scale cars as well.The kit comes with 6 pieces of fuel line clips and 2 assembled plastic fittings. Those fittings cannot be compressed by the tanks fuel line grommet, so the inner diameter remains constant which improves fuel delivery to the carb.Fuel line dimensions:Length: 1mInside diameter: 3 mmOuter diameter: 6 mmAvailable colors: AT001/01 - YellowAT001/02 - RedAT001/03 - BlueAT001/05 - GreenIncludes:2 x Assembled plastic fittings6 x Fuel line clipsTygon fuel line

€17.90*

Similar products

y0789 Chassis mud flaps for Losi 5ive-T/2.0

Chassis mud flaps for the Losi 5ive-T, made of 1.0 mm extremely durable plastic material. The mud flaps are precisely contoured to follow the 5ive-Ts roll cage and body shell. Die-cut and ready for installation featuring 15 eyelets in 3 different sizes and 4 each form and hole punchings to fit the roll cage brackets. The set also includes complete hardware for installation and an illustrated manual! Dimensions of mud flaps (laying flat): 930 x 135 mm Set includes: 2 x protective cover (right and left) 6 x cable clip 14 x fixing screws 12 x washers 1 x manual

€49.90*

y0565 RC-Tech Flexa Fix body shell glue

Genuine HT spare/option part. For all epoxy models, plastic and polycarbonate/lexan body repairs!Direction of use:Use a brush or other applicator. Apply enough Flexa Fix to the damaged area. Be careful not to apply too much in one go as it can be difficult to manipulate. If necessary apply two or three coats to build up the joint area. Use epoxy blanket of pieces of polycarbonate (Lexan) to re-enforce if necessary.You can also use the Flexa Fix to re-enforce the body corners (let the pure product leak into the corners) or to make flexible battery packs.Contents:1 piece / 100 ml

Content: 100 Milliliter (€109.00* / 1000 Milliliter)

€10.90*

LOSB5800/03 Losi Body clips smal, 25 mm

Fits Losi 5ive-T, 5ive Mini and many more. Wire thickness: 1,4 mm.Length: 25 mm.Content:10 pieces

€3.50*

LOSB 8255 5IVE Sticker & Graphic Sheet Set black/white 5T

Genuine Losi spare/option part.Dimensions:Decal A: width 486 mm, Hight 360 mmDecal B: width 405 mm, Hight 319 mmDecal C: width 398 mm, Hight 265 mmDecal D: width 350 mm, Hight 255 mmDecal E: width 315 mm, Hight 180 mmContents:1 set

€48.99*

LOSB5800 Losi Body clips for 5ive-T/2.0, TLR 5ive-B and Mini

Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini. Content:2 x body clip approx. 1.4 mm wire diameter and 85 mm toal length6 x body clip approx. 1.4 mm wire diameter and 25 mm toal length12 x body clip approx. 2.0 mm wire diameter and 43 mm toal length

€9.99*

LOSB5800/02 Losi Body clips medium, 43 mm

Fits Losi 5ive-T, 5ive Mini and many more. Wire thickness: 2 mm.Length: 35 mm.Content:10 pieces

€4.90*

LOSB2582 Losi Body Mount Washers & Pads 5T/2.0 and Mini

Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Content:56 pieces

€19.99*

LED Effect module for Losi 5ive-T, 5ive-T 2.0, DBXL/XL-E and others

Genuine rc-car-online spare/option part. A "must have" for every run in the dark. A total of 11 different lighting effects are programmeded into this LED module. The LED strip has the same size like that of the Losi 5ive-T 2.0 and the Losi DBXL-E and can therefore replace for the OEM version in its bracket.The LED module is typically powered by the receiver battery (maximum 7.4V). Depending on the version selected, the effects are changed via the radio (requires a free channel on transmitter and receiver) or via an onboard switch.The LED strip has on the back of an adhesive strip with which it can be glued on loose on the body. In the shop's options menu you can add an optional mounting bracket for the Losi 5ive-T. Modes:Continuous whiteContinuous white 30% intensityOffKnightRider redKnightRider whiteKnightRider blueKnightRider greenPolice 1Police 2SafetyCarRainbow chaser lightStrobo-Light whiteDimensions LED:Length: 160 mmHeight: 10 mmDimension mount:Width: 160 mmHeight orifice: 8 mmHeight behind orifice: 10 mmContents:1 set

€67.90*

LOSB5800/01 Losi Body clips big, 85 mm

Fits Losi 5ive-T and 5ive Mini. Wire thickness: 1,4 mm.Length: 85 mm.Content:10 pieces

€5.90*

LOSB 8102 Cab Body Section 5T clear, 1 pce.

You will need polycarbonate paint (sold separately) for the paint job when you select the clear version: Tamiya Sprühfarbe - 1St. Painting tips:

€129.99*

LOSB 8104/01 Body right Fender and Plate black 5T, 2 pcs.

Item N° LOSB 8104/01Body right Fender and Plate black 5T, 2 pcs. Ready for installation with factory applied decals!

€59.99*

y1467 Full body shell installation kit with 10.9 screws for Losi 5ive-T/2.0 and Mini

y1467 Version: y1467/02T Set with Torx screws 10.9 and T10 Bit+ 9.8EUR

Genuine Smartech spare/option part.Includes the complete set 26 body mounting washers, 22 support plates and corresponding screws for an original Losi 5ive-T or Losi 5ive-Mini body.Your choice of screws with either Allen head or hexalobular drive (a.k.a. Torx) heads!Content:26 pieces of mounting washers22 pieces of support plates14 pieces of countersunk screws (DIN7991) Allen head M4 x 20, 10.9 grade Alternatively TX10 Torx head, 10.9 grade12 pieces countersunk screws (DIN7991) Allen head M4 x 16, 10.9 gradeAlternatively TX10 Torx head, 10.9 grade

Variants from €13.90*

€22.31*