Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

LED Effect module for Losi 5ive-T, 5ive-T 2.0, DBXL/XL-E and others

Product information "LED Effect module for Losi 5ive-T, 5ive-T 2.0, DBXL/XL-E and others"

Genuine rc-car-online spare/option part.

A "must have" for every run in the dark. A total of 11 different lighting effects are programmeded into this LED module. The LED strip has the same size like that of the Losi 5ive-T 2.0 and the Losi DBXL-E and can therefore replace for the OEM version in its bracket.

The LED module is typically powered by the receiver battery (maximum 7.4V). Depending on the version selected, the effects are changed via the radio (requires a free channel on transmitter and receiver) or via an onboard switch.

The LED strip has on the back of an adhesive strip with which it can be glued on loose on the body. In the shop's options menu you can add an optional mounting bracket for the Losi 5ive-T.

Modes:
  • Continuous white
  • Continuous white 30% intensity
  • Off
  • KnightRider red
  • KnightRider white
  • KnightRider blue
  • KnightRider green
  • Police 1
  • Police 2
  • SafetyCar
  • Rainbow chaser light
  • Strobo-Light white
Dimensions LED:
  • Length: 160 mm
  • Height: 10 mm
Dimension mount:
  • Width: 160 mm
  • Height orifice: 8 mm
  • Height behind orifice: 10 mm


Contents:
  • 1 set

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

y1558/01 LED bar Spare part
Genuine rc-car-online spare/option part. Spare part for y1558 and y1559.Dimensions LED:Length: 310 mmHeight: 10 mmContents:1 piece

€24.90*

Average rating of 0 out of 5 stars

y1558/02 LED module for radio control, Spare part
Genuine rc-car-online spare/option part. Spare part for y1558.Contents:1 piece

€44.90*

Average rating of 0 out of 5 stars

y1558/03 LED module with switch, Spare part
Genuine rc-car-online spare/option part. Spare part for y1559.Contents:1 piece

€44.90*

Average rating of 0 out of 5 stars

y1558/04 Losi 5ive-T LED mount, Spare part
Genuine rc-car-online spare/option part. Spare part for y1558 and y1559.Dimension mount:Width: 160 mmHeight orifice: 8 mmHeight behind orifice: 10 mmContents:1 piece

€12.90*

Customers also bought

Average rating of 0 out of 5 stars

y1013 Motul Air filter oil for foam filters
Genuine Motul spare/option part. High-cling oil for foam cartridge air filters, especially for offroad and street use. The oil reinforces the the air filter'e efficiency and retains dirt, mud and sand particles, which will greatly extend the life of the engine. The blue tint makes it easier to control even oil application to the filter.Apply oil to filter generously and work the foam vigorously by hand to ensure complete oil penetration. Press foam slightly to remove excessive oil when done.Contents:1 piece / 400 ml

Content: 400 Milliliter (€47.25* / 1000 Milliliter)

€18.90*

Average rating of 0 out of 5 stars

y0113 Thread locking compound
kleb_0005 Strength: y0113/02 High+ 2EUR
Genuine HT spare/option part.Available as 272 high strength and heat resistant, 270/1 high strength or 241 medium strength.The strength of 272 and 270/1 is comparable, but 272 can handle temperatures up to 230°C vs. 150°C for 270/1. It is therefore the perfect choice for applications like exhaust or clutch pinion bolts. However, curing of 272 takes at least twice as long as 270/1.An excellent recommendation for removal of screws treated with threadlocking compound:CFH Diamant M50 Gasbrenner, y1007 Contents:1 piece / 10 gram

Content: 20 Gramm (€495.00* / 1000 Gramm)

Variants from €7.90*
€9.90*

Average rating of 0 out of 5 stars

y0813 Motul 800 Racing Oil
Fully synthetic oil, available in three blends. 1-liter bottle.The optimal 2-stroke oil for 23-30 cm³ engines/cars Motul Racing Oil is available in three different blends: On-Road for high revving onroad cars Off-Road for cars with high torque enginesMixing ratio for 1/5 & 1/6 applications: We recommend a mix with about 4% oil, which means 200 cc of oil to 5 litres of gas (1:25 ratio). With one litre of Motul oil you can mix about 25 litres of optimal fuel for your 1/5 or 1/6 car. That's enough for well over 20 hours of driving fun! Oil / Gas Oil percent Oil per 1 liter of gasoline Oil per 2 liter of gasoline Oil per 3 liter of gasoline Oil per 4 liter of gasoline Oil per 5 liter of gasoline 1:20 5% 50 ml 100 ml 150 ml 200 ml 250 ml 1:25 4% 40 ml 80 ml 120 ml 160 ml 200 ml 1:30 3,33% 33 ml 67 ml 100 ml 134 ml 167 ml 1:33 3% 30 ml 60 ml 90 ml 120 ml 150 ml 1:35 2,86% 29 ml 58 ml 86 ml 115 ml 143 ml 1:40 2,5% 25 ml 50 ml 75 ml 100 ml 125 ml 1:50 2% 20 ml 40 ml 60 ml 80 ml 100 ml

From €24.00*

Average rating of 0 out of 5 stars

y1312 Twin hose bracket
Twin hose bracket for hoses up to 7 mm outer diameter. With 5 mm hole for installation by screw or cable tie.Keeps your car's fuel lines in place. Especially helpfull with tuned pipe layouts running close to the engine.Screws with part number #6726/25 are recommended for installation on the fan cover.

From €14.90*

Average rating of 0 out of 5 stars

6726/25 FG Socket head cap screws M5x25 mm, 10 pieces
Genuine FG spare/option part.Part is delivered in silver or black color from vendor!Content:10 pieces

€3.90*

Average rating of 0 out of 5 stars

TT0989/7PX TopTuning Racing-Team Alloy transmitter case, Futaba T7PX Design
Genuine TopTuning spare/option part.Top quality lockable aluminum transmitter case in Futaba T7PX design. Case has plastic feet on bottom and back.The case lid features a lock on either side of the handle and a ribbed foam insert on the inside.Comes with 2 keys includedOuter dimensions: length approx. 320 mm Width: approx. 240 mm Height: approx. 160 mm Weight: 1.5 kgContents:1 piece

€79.90*

Similar products

Average rating of 0 out of 5 stars

y0789 Chassis mud flaps for Losi 5ive-T/2.0
Chassis mud flaps for the Losi 5ive-T, made of 1.0 mm extremely durable plastic material. The mud flaps are precisely contoured to follow the 5ive-Ts roll cage and body shell. Die-cut and ready for installation featuring 15 eyelets in 3 different sizes and 4 each form and hole punchings to fit the roll cage brackets. The set also includes complete hardware for installation and an illustrated manual! Dimensions of mud flaps (laying flat): 930 x 135 mm Set includes: 2 x protective cover (right and left) 6 x cable clip 14 x fixing screws 12 x washers 1 x manual

€49.90*

Average rating of 0 out of 5 stars

y0565 RC-Tech Flexa Fix body shell glue
Genuine HT spare/option part. For all epoxy models, plastic and polycarbonate/lexan body repairs!Direction of use:Use a brush or other applicator. Apply enough Flexa Fix to the damaged area. Be careful not to apply too much in one go as it can be difficult to manipulate. If necessary apply two or three coats to build up the joint area. Use epoxy blanket of pieces of polycarbonate (Lexan) to re-enforce if necessary.You can also use the Flexa Fix to re-enforce the body corners (let the pure product leak into the corners) or to make flexible battery packs.Contents:1 piece / 100 ml

Content: 100 Milliliter (€109.00* / 1000 Milliliter)

€10.90*

Average rating of 0 out of 5 stars

y1453 Elastoplastic Losi 5ive-T/2.0 body shell black
Extremely flexible 6-piece body shell for Losi 5ive-T, with complete installation hardware.Made of thermoplastic elastomer (TPE), an extremely strong plastic which combines thermoplastic and elastomeric properties! Color black (the decals pictured are not included!). The elastoplastic body set fits the stock Losi 5ive-T roll cage precisely and is almost "unbreakable"! Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells.Of course, the extreme deformability of the elastoplastic body shell, compared to the stock version, is a huge advantage.And there's more with the elastoplastic body shell:Better dirt protection for the 5ive-T through partially closed wheel wells front and rear.Front and rear fenders with large cut-outs prevent contact with the tires.Integrated window nets allow for improved airflow and better engine cooling.The textured surface of the elastoplastic body shell is largely soil-resisting.Please note: This feature also makes the use of highly specialised adhesives for any kind of decals unavoidable if you want them to stay. All decals shown in the pictures for presentation are of the standard version!Even though the elastoplastic body shell is much tougher than the stock Losi 5ive-T body, the weight increase only very moderate from 902 grams to 971 grams. The body shell is a 6-piece design for best flexibility possible.Contents:1 x hood/front fender2 x side panels1 x roof2 x rear fenders1 x complete installation hardware

€199.90*

Average rating of 0 out of 5 stars

LOSB5800 Losi Body clips for 5ive-T/2.0, TLR 5ive-B and Mini
Fits Losi 5ive-T, TLR 5ive-B and 5ive Mini. Content:2 x body clip approx. 1.4 mm wire diameter and 85 mm toal length6 x body clip approx. 1.4 mm wire diameter and 25 mm toal length12 x body clip approx. 2.0 mm wire diameter and 43 mm toal length

€9.99*

Average rating of 0 out of 5 stars

LOSB5800/02 Losi Body clips medium, 43 mm
Fits Losi 5ive-T, 5ive Mini and many more. Wire thickness: 2 mm.Length: 35 mm.Content:10 pieces

€4.90*

Average rating of 0 out of 5 stars

LOSB5800/03 Losi Body clips smal, 25 mm
Fits Losi 5ive-T, 5ive Mini and many more. Wire thickness: 1,4 mm.Length: 25 mm.Content:10 pieces

€3.50*

Average rating of 0 out of 5 stars

LOSB5800/01 Losi Body clips big, 85 mm
Fits Losi 5ive-T and 5ive Mini. Wire thickness: 1,4 mm.Length: 85 mm.Content:10 pieces

€5.90*

Average rating of 0 out of 5 stars

LOSB 8255 5IVE Sticker & Graphic Sheet Set black/white 5T
Genuine Losi spare/option part.Dimensions:Decal A: width 486 mm, Hight 360 mmDecal B: width 405 mm, Hight 319 mmDecal C: width 398 mm, Hight 265 mmDecal D: width 350 mm, Hight 255 mmDecal E: width 315 mm, Hight 180 mmContents:1 set

€48.99*

Average rating of 0 out of 5 stars

y1467 Full body shell installation kit with 10.9 screws for Losi 5ive-T/2.0 and Mini
y1467 Version: y1467/01 Set with Allen head screws 10.9
Genuine Smartech spare/option part.Includes the complete set 26 body mounting washers, 22 support plates and corresponding screws for an original Losi 5ive-T or Losi 5ive-Mini body.Your choice of screws with either Allen head or hexalobular drive (a.k.a. Torx) heads!Content:26 pieces of mounting washers22 pieces of support plates14 pieces of countersunk screws (DIN7991) Allen head M4 x 20, 10.9 grade Alternatively TX10 Torx head, 10.9 grade12 pieces countersunk screws (DIN7991) Allen head M4 x 16, 10.9 gradeAlternatively TX10 Torx head, 10.9 grade

€13.90*

Average rating of 0 out of 5 stars

LOSB2582 Losi Body Mount Washers & Pads 5T/2.0 and Mini
Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Content:56 pieces

€19.99*

Average rating of 0 out of 5 stars

LOSB 8105 Complete Body Set, Clear for Losi 5ive-T
Genuine Losi spare/option part. Set includes:LOSB8102 Cab Body section & Window MasksLOSB8101 Hood/Front fenders body sectionLOSB8103 Left rear fender & number plateLOSB8104 Right rear fender & number plateLOSB8220 Grill, light & logo sticker sheetPainting tips:

€279.99*

Average rating of 0 out of 5 stars

LOS350006 Losi Complete Body Set, Clear, 5ive-T 2.0
Genuine Losi spare/option part. Contents:1 setPainting tips:

€349.99*

Customers also viewed

Average rating of 0 out of 5 stars

Mielke 5185 Big Power muffler set for Losi 5ive-T/2.0 and Mini
New Big-Power muffler with volume increased by about 30%, therefore especially suited for 26 - 32 cc engines.Made from aluminum tubing with a steel manifold this tuned pipe system has a lower weight than comparable units.Pure power over the complete rpm range!Fits Losi 5ive-T and Mini WRC

€249.90*

Average rating of 0 out of 5 stars

y0827 Spout for gas cans, 1 pce.
Spout, fits the standard gas cans, for a spill-free gas up. For gas cans with the following thread size: diameter 37 mm x pitch 5 mm.Compatible with Marder tanks as well!

€22.90*

Average rating of 0 out of 5 stars

66240 FG Alloy radio plate 4WD, 1 pce.
Item N° 66240 Alloy radio plate 4WD, 1 pce.

€29.95*

Average rating of 0 out of 5 stars

TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters
Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€37.90*

Average rating of 0 out of 5 stars

y1558/04 Losi 5ive-T LED mount, Spare part
Genuine rc-car-online spare/option part. Spare part for y1558 and y1559.Dimension mount:Width: 160 mmHeight orifice: 8 mmHeight behind orifice: 10 mmContents:1 piece

€12.90*

Average rating of 0 out of 5 stars

y0811 After-Run, performance enhancing preservation for all 1/5 and 1/6th scale models, 20 ml
Genuine HT spare/option part. After-Run is a performance enhancing preservation, which ensures that the engine starts properly, even after a long time (winter break) storage. Added to the fuel it keeps the fuel system clean.Among other After-Run conserves the diaphragm of the Walbro carburetor!For long term storage (i.e. during winter!) "vital" for the carburetor diaphragms!For 23 to 32 cm³ engines like Zenoah, Chung Yang, PT, Losi, HPI a.s.o.It binds water in the fuel, particularly important when the engine is not run regularly or after wet races. After-Run improves engine performance, ensures better combustion, removes debris and residues. Simply add the content of the bottle to 5 litres of fuel.Contents:1 piece / 20 ml

Content: 20 Milliliter (€395.00* / 1000 Milliliter)

€7.90*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Plugin Development