Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

y1421 Engine quick mount for G320 Zenoah in FG 1/5 scale

Product information "y1421 Engine quick mount for G320 Zenoah in FG 1/5 scale"

Genuine HT spare/option part.

The engine quick mount replaces the standard clutch housing. It allows a much faster installation or removal of the engine since the clutch side of the engine is only be clamped by one single screw. The gear plate remains in the vehicle, the motor flange on the engine.

The engine quick mount fits all FG 2WD on-road cars with horizontal engine (except Formula 1) Sportsline, Competition and Evo (EVO model range till 2003, except Evo 2020 series).

We are sorry, but due to the design the quick mount cannot be used for FG 1/6 off-road and monster cars.

For the first time it is now possible to install the Zenoah G320 in these cars! For cars allready equipped with a FG quick mount only the engine flange y1423/02 is required.

The quick mount is available in two versions:
  • y1421/01 for all Zenoah and Chung Yang engines up to 30 cm³ with standard bolt pattern 50 x 36 mm
  • y1421/02 for Zenoah G320


When mounting the motor flange the bolts/nuts must be tightened together in small steps. To mount the studs from y1421/01 or the screws from y1421/02 the use of thread locking compound (link) is required.

Please note: y1421/01 does not fit in combination with Zenoah OEM clutch!

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

%

Average rating of 0 out of 5 stars

y1422 Clamping ring for engine quick mount
Genuine HT spare/option part. Spare part for engine quick mount y1421.

€24.97* €49.95* (50% saved)

Average rating of 0 out of 5 stars

y1423 Engine flange for engine quick mount, G320 version available for FG 1/5 models
Genuine HT spare/option part. For fitment on additional engines or as a spare part for engine quick mount y1421. The engine flange is available in two versions:y1423/01 for all Zenoah and Chung Yang engines up to 30 cm³ with standard bolt pattern 50 x 36 mmy1423/02 for Zenoah G320 - For installation of a Zenoah G320 in a FG Evo (Model range from 2004 till 2014). Fits the standard quick mount.When mounting the motor flange the bolts/nuts must be tightened together in small steps. To mount the studs from y1421/01 or the screws from y1421/02 the use of thread locking compound (link) is required.Please note: y1423/01 does not fit in combination with Zenoah OEM clutch!

€39.95*

Customers also bought

Average rating of 0 out of 5 stars

Mielke 5447/03 Springs 2 mm made from special steel
Genuine Mielke spare/option part. Replacement part for Mielke Power Gearshift clutches #5440 and #5441.Content:3 pieces

€9.90*

Average rating of 0 out of 5 stars

5646 Mielke Mix clutch pads single for Power Gearshift Converse II clutch
Genuine Mielke spare/option part.Contents:3 pieces

€44.90*

Average rating of 0 out of 5 stars

6534/02 FG Throttle pivot post
Item N° 6534/02 Throttle pivot post 3.1mm - setRevised set for 2 mm linkages, but with 3.1 mm pivot bore to prevent linkage seizing. Can be used for throttle or brake applications.Set collars have 2.1 mm inner diameter.

€8.50*
%

Average rating of 0 out of 5 stars

6349 FG In-tank fuel filter, 1 pce.
Clunk felt filter, protects the carb against debris in the fuel.

€11.90* €13.10* (9.16% saved)

Average rating of 0 out of 5 stars

8453/01 FG Front upright for 1:5 with steel ring
Genuine FG spare/option part. Suitable for all mechanical disk brakes.Steel insert provides a strong thread for the mounting bolts.Contents:2 pieces

€29.90*

Average rating of 0 out of 5 stars

7474 FG Alloy gear plate 97 for 2WD and 4WD
Genuine FG spare/option part. Suitable for all FG 1:5 and 1:6 2WD and 4WD models. Best fitting of ball bearing seat and distance of gear shaft, non-twisting. To mount this gear plate into the models Marder, Beetle, Beetle On-Road, Pajero and Monster the rear brake 7040/01 is needed.Bearing seatsClutch bell: 22 x 6 mmLayshaft: 19 x 7 mmContent:1 piece

€93.40*

Customers also viewed

Average rating of 0 out of 5 stars

7474 FG Alloy gear plate 97 for 2WD and 4WD
Genuine FG spare/option part. Suitable for all FG 1:5 and 1:6 2WD and 4WD models. Best fitting of ball bearing seat and distance of gear shaft, non-twisting. To mount this gear plate into the models Marder, Beetle, Beetle On-Road, Pajero and Monster the rear brake 7040/01 is needed.Bearing seatsClutch bell: 22 x 6 mmLayshaft: 19 x 7 mmContent:1 piece

€93.40*

Average rating of 0 out of 5 stars

6486 FG Alloy engine mount big for 1:6 2WD Zenoah alloy - 1pce.
Big alloy engine mount suitable for FG 2WD 1/6 cars with CY / Zenoah G230/240/260/270 engine.

€69.95*

Average rating of 0 out of 5 stars

2012-148 Mecatech Rear Body Mounting
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€9.20*

Average rating of 0 out of 5 stars

7328/08 FG Ignition coil for CY / Zenoah / Fuelie / Losi
Genuine FG spare/option part.For Zenoah G230/240/260/270/290/320 enginesContents:1 piece

€63.75*

Average rating of 0 out of 5 stars

y0654 Alloy engine mount big 1:5 2WD for FG Sportsline Zenoah
CNC-cut alloy engine mount for all FG 1:5 and 1:6 Truck models with horizontal engine ahead as Zenoah ZG22, G230RC, G260RC, FG CY23 and CY26.Bearing seat 19 x 7 mm2WD FG 1/5 Sportsline cars do not use a small engine mount. For this application the stock aluminum plate # 7398 is used for engine installation.

€69.90*

Average rating of 0 out of 5 stars

67399 FG Tuned pipe for Leo 2020 2.0 4WD
Genuine FG spare/option part. Contents:1 set

€329.50*

Average rating of 0 out of 5 stars

2065 FG 360 GT Lexan body parts
Original FG GT 360 body parts, without rear part !!!  Scope of delivery and equipment see photos.  Included in delivery are main part, front spoiler and rear spoiler. Rarity !!!  for the 530 mm wheelbase  Width 400 mm.  Length 790 mm  Height 220 mm

€189.00*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Agency