8345 FG Coupling flange for Zenoah 1:6 edited for all FG models, 1 pce.

€44.50*

Available

Product number: fg_8345

EAN: 3410564520727

Product information "8345 FG Coupling flange for Zenoah 1:6 edited for all FG models, 1 pce."

Suitable for Zenoah ZG22, G230RC, G230RC 04, G260RC, G240, G270, G290, FG CY23 and CY26.

With cutout for all FG models.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

y8345 Coupling flange for Zenoah 1:6, 1 pce.

Suitable for Zenoah ZG22, G230RC, G230, G260, G240, G270, G290, FG CY23 and CY26.Not fit FG models (For FG models: 8345 Coupling flange for Zenoah 1:6 edited for all FG models).

€19.90*

Customers also viewed

y8345 Coupling flange for Zenoah 1:6, 1 pce.

Suitable for Zenoah ZG22, G230RC, G230, G260, G240, G270, G290, FG CY23 and CY26.Not fit FG models (For FG models: 8345 Coupling flange for Zenoah 1:6 edited for all FG models).

€19.90*

8344/01 FG Coupling flange for Solo/Zenoah horizontal 1:5 - 1pce.

Suitable for FG CY23, CY26, Zenoah G230RC, G230RC 04, G260RC, G240, G270, G290, ZG22 as well as Solo engines.

€42.80*

6039/01 FG Spacer tubes for gear plate

Genuine FG spare/option part. For onroad cars (horizontally installed engine).Dimensions:Length: 1 pce. 32mm, 2 pcs. 34mmLength until recessed section: 21.5 mmOuter diameter: 10 mmBore: 6 mmContents:3 pieces

€7.90*

y1009 Zenoah G240RC with Walbro carburetor WT 990

23 cm³ Zenoah engine for large scale cars!Please note: contrary to their new designation the displacement has not been increased! The outer dimension didn't change, so you don't need any additional parts for the engine swap!The engines feature the following improvements over their G230:Quantity of cylinder mounting bolts increased from 2 to 4Improved strength of crankcaseAdded additional bearing on the PTO (clutch) side of crankshaftRedesigned shape of cylinder finsDimension of air intake port is 5% widerContains internal fuel pump which increases acceleration from idle to wide open throttle.Removal of choke valve increases performance by increasing air flow to the carburetor Changed material of the insulator gasket to metal, which improves sealing performanceThe engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge. Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€274.90*

32457 Spacer - 3pcs.

€6.90*

7154/01 FG Body mount adjustable 80mm

Genuine FG spare/option part.Adjustable body mount with heigt-adjustable body support.Fits RC-models and bodies.Contents:1 set

€9.95*

7099 FG Distance disk - 8pcs.

Spacer bushings for front axle caster adjustment.Outer diameter 11 mmInner diameter 6.3 mmWidth 6 mm

€3.90*