y1137 GPM-Big Bore shocks for FG, Carson/Smartech and Kyosho, set
Product information "y1137 GPM-Big Bore shocks for FG, Carson/Smartech and Kyosho, set"
GPM-Spezial Cross shocks, premium full metal version.
Assembled and filled.
Special features:
- 16 mm shock bore for increased capacity
- volume compensation
- shock body and caps machined from billet aluminum
- hard anodized shock body
- machined precision delrin pistons (not injection molded!)
- aluminum shaft end and spring retainer
- shock caps with replaceable bushings
- factory filled with 1000
GPM-Spezial Cross shocks, premium full metal version.
Assembled and filled.
Special features: - 16 mm shock bore for increased capacity
filling quantity
short 7ml
long 9ml
Long and short version availble in the following sets:
|
|
|
|
|
|
|
Marder, Off-Road Buggy, Beetle, Monster Beetle
Carson 2WD:
Comanche, Attack Evo, CRT, CPT, Smartech Monster-TruckSet includes:
2 each long and short shocksy1137/02 Version 2FG 2WD:
Monster-Truck, Monster Jeep, Monster Hummer, Monster Beetle Pro, Stadium Truck, Stadium Jeep, Stadium Hummer
Set includes:
4 long shocks
|
|
|
|
|
2020 and 2020.1 from 2015
Set includes:
4 short shocks equipped with shortened shock mounts and spring perches: front shocks filled width 2000 cps oil, rears with 1500 cps.
Springs are required.
| y1137/08 Version 8 |
| FG-Evo Modelle: 2008 - 2011 and Evo from 2012 an up |
| Set includes: 4 short shocks equipped with shortened shock mounts |
Marder, Off-Road Buggy, Beetle, Monster Beetle
Carson 2WD:
Comanche, Attack Evo, CRT, CPT, Smartech Monster-TruckSet includes:
2 each long and short shocksy1137/02 Version 2FG 2WD:
Monster-Truck, Monster Jeep, Monster Hummer, Monster Beetle Pro, Stadium Truck, Stadium Jeep, Stadium Hummer
Set includes:
4 long shocks
|
|
|
|
|
2020 and 2020.1 from 2015
Set includes:
4 short shocks equipped with shortened shock mounts and spring perches: front shocks filled width 2000 cps oil, rears with 1500 cps.
Springs are required.
| y1137/08 Version 8 |
| FG-Evo Modelle: 2020 and 2020.1 from 2015 |
| Set includes: 4 short shocks equipped with shortened shock mounts |
Marder, Off-Road Buggy, Beetle, Monster Beetle
Carson 2WD:
Comanche, Attack Evo, CRT, CPT, Smartech Monster-TruckSet includes:
2 each long and short shocksy1137/02 Version 2FG 2WD:
Monster-Truck, Monster Jeep, Monster Hummer, Monster Beetle Pro, Stadium Truck, Stadium Jeep, Stadium Hummer
Set includes:
4 long shocks
|
|
|
|
|
2020 and 2020.1 from 2015
Set includes:
4 short shocks equipped with shortened shock mounts and spring perches: front shocks filled width 2000 cps oil, rears with 1500 cps.
Springs are required.
| y1137/09 Version 9 |
| FG-Evo Modelle: 2020 and 2020.1 from 2015 |
| Set includes: 4 short shocks equipped with shortened shock mounts |
2020 and 2020.1 from 2015
Set includes:
4 short shocks equipped with shortened shock mounts and spring perches: front shocks filled width 2000 cps oil, rears with 1500 cps.
Als Federbestückung wird die Bestell Nr. are required.
We recommend our progressive offroad tuning springs ""Dirt-Spring M"".
FG cars can use their stock springs as well.
Dimensions:
- Overall length, extended: long 155 mm, short 131 mm
- Mounting distance, extended: long 144,5 mm, short 120,5 mm
- Travel: long 43,5 mm, short 30,5 mm
- Inner diameter of spring: 21 mm
- Shock body diameter: 20 mm
- Eye bore: 4.5 mm
- Eye thickness: top 6 mm, bottom 5 mm
- Shaft diameter: 4 mm
- Shaft thread: M4
We recommend our progressive y0452/02. for these shocks. On FG cars the OEM springs can be used as well. Shock versions y1137/07 and y1137/08 for Smartech C5 and FG on-road cars should use spring
Shock oil recommendations:
The GPM-Spezial Cross shocks are factory filled with 1000 viscosity silicone oil. This gives a very good shock performance at normal ambient temperatures.
When a softer shock is required, you can go for 500 or even 600 viscosity oil; 1500 and up if you prefer more damping.
One 50 ml bottle fills 5 long or 6 short shocks.
For use in a Kyosho Scorpion XXL (version 6), the shocks must be installed with an additional 4 mm spacer at the lower front mount (see picture above). The stock Scorpion springs can be used. We suggest silicone oil with a 100 to 200 viscosity for the front and a 200 to 300 viscosity for the rear .
Introductory price! Regular price: 129,90 EUR / set
Login
Alternatives
Alternatives
Modified version, especially for the 5 mm shock mounts on FG 4WD cars (Off-Road Buggy/Marder rear, Monster/Stadium front + rear).Comes with bushings and o-rings included.
Diameter 4.5 mmThread size for shaft end M4, for piston M3.
Diameter 4.5 mmThread size for shaft end M4, for piston M3.
With plastic bushing includedLength: 26.4 mm overall, about 22 mm to to center of bushingM4 thread for shock shaftBushing i.d. 4 mm
Genuine GPM spare/option part. GPM Part no. 09/13.Content:2 pieces
Please note: depending on stock at hand the actual color of the o-rings may be black or white.
Self adhesive backed.
The new version of the shock shafts has a shorter thread so that it can go deeper into the new shock shaft end. This protects the critical transition from the thread to the shaft.Set with 2 shock shafts (long or short version) and 2 shaft ends.Shaft end dimensionsLength: 26.5 mm overall, about 22 mm to center of bushingM4 thread for shock shaft, M3 for pistonBushing i.d. 4 mm Shock shaft length: short 64 mm / long 77 mmThread size for shaft end M4, for piston M3Shaft diameter 4.5 mm
The new version of the GPM cross shock shafts has a shorter thread so that it can go deeper into the new shock shaft end. Diameter 4.5 mmThread size for shaft end M4, for piston M3.
The new version of the GPM cross shock shafts has a shorter thread so that it can go deeper into the new shock shaft end. Diameter 4.5 mmThread size for shaft end M4, for piston M3.
The new version of the shock shaft end is recessed (without thread) allowing the shaft to go in deeper. This protects the critical transition from the thread to the shaft.With plastic bushing included.Length: 26.5 mm overall, about 22 mm to center of bushingM4 thread for shock shaftBushing i.d. 4 mm
High quality cnc machined parts made by GPM Racing Products from high strength billet aluminum. This extra long version is required for installation of GPM Cross Shocks on the front suspension of FG 4WD Monster cars.
Accessories / Spare parts
Accessories / Spare parts
Item N° y0574 GPM-Spezial Cross shocks singel, 1 pce.GPM-Spezial Cross shocks, premium full metal version, assembled and filled.Special features:- 16 mm shock bore for increased capacity- volume compensation- shock body and caps machined from billet aluminum- hard anodized shock body- machined precision delrin pistons (not injection molded!)- aluminum shaft end and spring retainer- shock caps with replaceable bushings-factory filled with silicone oilPart no.:Schock typ:Fastening bore Top ButtonIncludet in:y0574/01Short4 mm4 mmFront shocks version 1 and 5.y0574/02Long4 mm4 mmRear shocks version 1 and 5 / front shocks version 3 / front and rear shocks version 2.y0574/03Long/Short feet(26 mm)5 mm4 mmRear shocks version 3 / Rear shocks version 4.y0574/04Long/Long feet (35 mm)5 mm4 mmFront shocks version 4We recommend our progressive offroad tuning springs "". FG cars can use their stock springs as well.Long and short version availble in the following sets:Dimensions: - Overall length, extended: long 155 mm, short 131 mm - Mounting distance, extended: long 144,5 mm, short 120,5 mm - Travel: long 43,5 mm, short 30,5 mm - Inner diameter of spring: 21 mm - Shock body diameter: 20 mm - Eye bore: 4.5 mm - Eye thickness: top 6 mm, bottom 5 mm - Shaft diameter: 4 mm - Shaft thread: M4 Shock oil recommendations:The GPM-Spezial Cross shocks are factory filled with 500 viscosity silicone oil. This gives a very good shock performance at normal ambient temperatures.When a softer shock is required, you can go for 400 or even 300 viscosity oil; 600 and up if you prefer more damping.One 50 ml bottle fills 5 long or 6 short shocks.
Genuine HT spare/option part. Special fabric bag to protect engines, rc-plates or other expensive items. Large opening and pull-string closure.Size:Diameter 200 mmHeight 200 mmContents:1 pieceAccessories not included.
Progressive tuning springs, will fit the standard red and the thick silver shocks on FG offroad cars. The rear springs will also fit Hurrax shocks. All springs have an internal diameter because of the manufacturing progress: 21 up to 21,5 mm. Available in several versions: For the front on FG 2WD buggies:y0322/01 - M1, 2,1 x 50 mm, yellowy0322/02 - M2, 2,2 x 50 mm, orangey0322/03 - M4, 2,4 x 50 mm, purpley0322/04 - M5, 2,5 x 50 mm, blueFor the rear on FG buggies, front and rear on FG monster cars and 4WD buggies:y0323/01 - M11, 2,1 x 90 mm, yellowy0323/02 - M12, 2,2 x 90 mm, orangey0323/03 - M13, 2,3 x 90 mm, redy0323/04 - M14, 2,4 x 90 mm, purpley0323/05 - M15, 2,5 x 90 mm, bluey0323/06 - M16, 2,6 x 90 mm, blackFor the front on FG buggies:y0324/01 - M01, 2,1 x 60 mm, yellowy0324/02 - M02, 2,2 x 60 mm, orangey0324/03 - M03, 2,3 x 60 mm, redy0324/04 - M04, 2,4 x 60 mm, purpley0324/05 - M05, 2,5 x 60 mm, bluey0323/06 - M16, 2,6 x 90 mm, blackContents:2 pieces
Genuine HT spare/option part. Progressive tuning springs, will fit the standard red and the thick silver shocks on FG offroad cars. All springs have an inner diameter of 21 mm.Available in several versions.For the front on FG buggies:y0324/01 - M01, 2,1 x 60 mm, yellowy0324/02 - M02, 2,2 x 60 mm, orangey0324/03 - M03, 2,3 x 60 mm, redy0324/04 - M04, 2,4 x 60 mm, purpley0324/05 - M05, 2,5 x 60 mm, blueContent:2 pieces
Genuine silicone shock absorber oil for the optimal shock absorber set-up. Content: 50 ml Please note: Factory filling of FG/Losi/Smartech and many other 1/5 and 1/6 scale shocks is done with genuine silicone shock absorber oil. To ensure seal tightness and consistency you should only use genuine silicone shock absorber oil for refilling as well.Most every rc-car shock absorber uses silicone oil of different viscosities. The smaller the number, the lower the viscosity of the silicone oil and the softer the damping. As a rule of thumb: Viscosity 100 = similar to water Viscosity 1.000 = similar to cooking oil Viscosity 5.000 = similar to shampoo Viscosity 10.000 = similar to honey As a reference: The red FG Marder / Off-Road Buggy series shock absorbers are factory filled with 2.000 viscosity oil, the shocks on monster cars with dual shock set-ups (total of 8 shocks) are filled with 1.000 viscosity oil, and the shocks on FG onroad cars come filled with 4.000 viscosity oil. The original filling of the Losi 5ive-T is 350cc silicone oil.FG Silicone oil with 50 ml:FG Item N° 6510/010 = Viscosity: 100FG Item N° 6510/025 = Viscosity: 250FG Item N° 6510/035 = Viscosity: 350FG Item N° 6510/050 = Viscosity: 500FG Item N° 6510/075 = Viscosity: 750FG Item N° 6510/100 = Viscosity: 1000FG Item N° 6510/150 = Viscosity: 1500FG Item N° 6510/200 = Viscosity: 2000FG Item N° 6510/300 = Viscosity: 3000FG Item N° 6510/400 = Viscosity: 4000FG Item N° 6510/500 = Viscosity: 5000FG Item N° 6510/600 = Viscosity: 6000FG Item N° 6510/700 = Viscosity: 7000FG Item N° 6510/800 = Viscosity: 8000FG Item N° 6510/900 = Viscosity: 9000FG Item N° 6511 = Viscosity: 10000Viscosity of silicone oil at various temperatures.
Content: 50 Milliliter (€179.00* / 1000 Milliliter)
Genuine silicone shock absorber oil for the optimal shock absorber set-up. Content: 100 ml Please note: Factory filling of FG/Losi/Smartech and many other 1/5 and 1/6 scale shocks is done with genuine silicone shock absorber oil. To ensure seal tightness and consistency you should only use genuine silicone shock absorber oil for refilling as well.Most every rc-car shock absorber uses silicone oil of different viscosities. The smaller the number, the lower the viscosity of the silicone oil and the softer the damping. As a rule of thumb: Viscosity 100 = similar to water Viscosity 1.000 = similar to cooking oil Viscosity 5.000 = similar to shampoo Viscosity 10.000 = similar to honey As a reference: The red FG Marder / Off-Road Buggy series shock absorbers are factory filled with 2.000 viscosity oil, the shocks on monster cars with dual shock set-ups (total of 8 shocks) are filled with 1.000 viscosity oil, and the shocks on FG onroad cars come filled with 4.000 viscosity oil. The original filling of the Losi 5ive-T is 350cc silicone oil.FG Silicone oil with 100 ml:FG Item N° 66295/010 = Viscosity: 100 FG Item N° 66295/025 = Viscosity: 250FG Item N° 66295/035 = Viscosity: 350FG Item N° 66295/050 = Viscosity: 500FG Item N° 66295/075 = Viscosity: 750FG Item N° 66295/100 = Viscosity: 1000FG Item N° 66295/150 = Viscosity: 1500FG Item N° 66295/200 = Viscosity: 2000FG Item N° 66295/300 = Viscosity: 3000FG Item N° 66295/400 = Viscosity: 4000FG Item N° 66295/500 = Viscosity: 5000FG Item N° 66295/600 = Viscosity: 6000FG Item N° 66295/700 = Viscosity: 7000FG Item N° 66295/800 = Viscosity: 8000FG Item N° 66295/900 = Viscosity: 9000FG Item N° 66296 = Viscosity: 10000Viscosity of silicone oil at various temperatures.
Content: 100 Milliliter (€129.00* / 1000 Milliliter)
Genuine HT spare/option part. A simple and effective method to prevent the suspension from bottoming out even with a soft damper setting. A rubber grommet dampens the hard impact to the shocks. Using small clips (which are also available separately) of 1.5 mm, 2 mm or 3 mm thickness, suspension travel can be adjusted to match vehicle ride height. The set includes all parts for two shock absorbers.The clips fit shock shafts up to 4.5 mm diameter. Suitable for the following shock : y1137 GPM - Spezial Cross shocks (all versions) 2011 Mecatech Big Bore Shocks y1193 Mecatech Klick-Shocks, externally adjustable FG 6083/6084 shocks front / rear 66291/66292/66293 alloy shocks 08 67320/67330 alloy shocks for Leopard 2WD/4WD 7202/7203/7204 alloy shocks 04 305029/305030 shocks Comanche / Attack Evo 32488 Carson 1/5 front shocks 32574 Carson 1/5 rear shocks Cad shocks (all versions ) Content:6 clips 1.5 mm thick6 clips 2 mm thick6 clips 3 mm thick 2 rubber grommets 4 suspension travel washers
The new version of the shock shafts has a shorter thread so that it can go deeper into the new shock shaft end. This protects the critical transition from the thread to the shaft.Set with 2 shock shafts (long or short version) and 2 shaft ends.Shaft end dimensionsLength: 26.5 mm overall, about 22 mm to center of bushingM4 thread for shock shaft, M3 for pistonBushing i.d. 4 mm Shock shaft length: short 64 mm / long 77 mmThread size for shaft end M4, for piston M3Shaft diameter 4.5 mm
High quality cnc machined parts made by GPM Racing Products from high strength billet aluminum. This extra long version is required for installation of GPM Cross Shocks on the front suspension of FG 4WD Monster cars.
These protective covers prevent the shock piston rods and seals for wear caused by dirt. They fit most 1/6 and 1/5 scale shocks.Not suitable for Gas Devil, Thunderbolt, Helldevil, CRT 4x4!- total length 150 mm for all FG / Carson / Smartech / Conrad and all dampers with a diameter from 22 to 30 mm. Set of 4
Kunden haben auch gesehen
Kunden haben auch gesehen
Item N° y0574 GPM-Spezial Cross shocks singel, 1 pce.GPM-Spezial Cross shocks, premium full metal version, assembled and filled.Special features:- 16 mm shock bore for increased capacity- volume compensation- shock body and caps machined from billet aluminum- hard anodized shock body- machined precision delrin pistons (not injection molded!)- aluminum shaft end and spring retainer- shock caps with replaceable bushings-factory filled with silicone oilPart no.:Schock typ:Fastening bore Top ButtonIncludet in:y0574/01Short4 mm4 mmFront shocks version 1 and 5.y0574/02Long4 mm4 mmRear shocks version 1 and 5 / front shocks version 3 / front and rear shocks version 2.y0574/03Long/Short feet(26 mm)5 mm4 mmRear shocks version 3 / Rear shocks version 4.y0574/04Long/Long feet (35 mm)5 mm4 mmFront shocks version 4We recommend our progressive offroad tuning springs "". FG cars can use their stock springs as well.Long and short version availble in the following sets:Dimensions: - Overall length, extended: long 155 mm, short 131 mm - Mounting distance, extended: long 144,5 mm, short 120,5 mm - Travel: long 43,5 mm, short 30,5 mm - Inner diameter of spring: 21 mm - Shock body diameter: 20 mm - Eye bore: 4.5 mm - Eye thickness: top 6 mm, bottom 5 mm - Shaft diameter: 4 mm - Shaft thread: M4 Shock oil recommendations:The GPM-Spezial Cross shocks are factory filled with 500 viscosity silicone oil. This gives a very good shock performance at normal ambient temperatures.When a softer shock is required, you can go for 400 or even 300 viscosity oil; 600 and up if you prefer more damping.One 50 ml bottle fills 5 long or 6 short shocks.
5 mm thick servo disk with reinforcement ring around the spline, 40 mm diameter.All holes with 2.5 mm diameterHole circles: 20/21/22/23/30/31/32/33 mm
Genuine FG spare/option part. Suitable on the front axle for all FG 1:6 buggy models.Dimensions:Mounting hole distance: 113 mmTravel: 26 mmDiameter: 20 mmFG factory fill is viscosity 2000 for Marder & Co. and 1000 for stadium / monster cars.RecommendationMarder & Co.: during winter viscosity 1000 - 1500, 1500 - 2000 for summerMonster / Stadium: For offroad use in the winter viscosity 700 - 900, for summer 900 - 1500; use a slightly higher viscosity for on-road useContents:1 piece
Genuine FG spare/option part. The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier. Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark. The shock absorber has an diameter of approx. 16 mm. Suitable for all damper springs with approx. 17 mm inside diameter .With 110 mm hole distance.Contents:2 pieces
Genuine FG spare/option part.The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier. Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark. The shock absorber 2004 has an diameter of approx. 16 mm. Suitable for all damper springs with approx. 17 mm inside diameter. Installation length Extended: 139 mmTravel: 38 mmContents:2 pieces