16 products found for "y0057"

rc-car-online - Home

Tuning brake pads y0050 for mechanical FG brake, 4 piece set

uning brake pad set, 4 pieces for steel brake discs. Suitable for all mechanical wheel brakes from FG and HPI y0056 to significantly increase the braking force. Set contains 4 brake pads.

€49.90*

y0057 Ball & socket tool for Losi and HPI

Genuine HT spare/option part. Ball & socket tool with t-handle, special version for the ball joints.Fits Losi 5ive-T. 5ive-B, Desert Buggy XL, Desert Buggy XL-E, Monster Truck XL and the HPI Baja 5B and Baja 5R Ford Mustang.Contents:1 piece

€17.90*

2 block tuning clutch y0051 adjustable for Zenoah, 1 piece

New adjustable 2-jaw clutch. - High-quality workmanship - Pads are individually replaceable - Individually adjustable to the conditions. For FG, Carson, Losi models and HPI Baja 5B, except FG F1 and EVO2020. 1 piece

€109.90*

y0757 Special exhaust manifold screw set, 5 pcs.

Cap screws for 1/5 & 1/6 large scale cars, DIN 912 - 8.8 M5x16 with corresponding external tooth lock washers DIN 679A.The lock washers prevent loosening of the manifold screws.Bag with five each screws and lock washers.Part is delivered in silver or black color from vendor!

€3.90*

y0957 HT-Alloy steering centerlink for Gas/Hell Devil/Thunderbolt / Smartech Titan

Genuine HT spare/option part. Steering centerlink, very strong, does not bend.The stock high socket ball / M3 bolt will be replaced with a standard unit / M4 bolt without the unnecessary leverage.Standard plastic bushings and a spacer (used as an axle) replace the expensive proprietary bolts and bushings from the stock part. Rebuilding the bearings becomes cheap and easy with this centerlink.All parts included.Contents:1 piece

€34.90*

y0056 HT - Carson Wild GP Attack and HPI Baja 5B/SS/5T/5sc premium front disk brake

Normal price: 249,90 EUR Tuning front disk brake system for the HPI Baja 5B/SS/5T/5sc, the conversion kit includes all necessary parts. The brake includes the finest parts available for a cable brake and has the following features: * uses existing mounting points for all parts * brake pads and 70 mm diameter stainless rotors made by RS-5, the best performing combination available * hardened stud bolts for the brake pads * billet brake levers, no tweak and best transfer of servo power * ultraflex bowden cables * brake cams run in hardened steel bushings and brass guide plates (miniature bearings don't last in offroad cars) * billet alloy bowden cable support block with adjustment screws * billet alloy bowden cable mounts at the calipers * pre-assembledOn a 5T the stud bolts which hold the brake pads will interfere with the ribs in the rim. However, modifying the rim or swapping the stud bolts for long csh screws allows for installation on a 5T.Spare parts for this brake as a PDF-file with spare part numbersWe highly recommend the installation of a stronger throttle servo to take full advantage of this brake system. The is an excellent choice.

€239.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0557 Zenoah G230RC with Walbro carburetor WT 603B

23 cc Zenoah engine for large scale cars!The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge.Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€264.90*

y0052 HT venturi adaptor set

luftf_0025 Engine: Solo

Upgrade in case you already own the airbox.Includes venturi adaptor, K&N filter, K&N filter oil (200ml spray can) and K&N filter cleaner (355ml bottle).When using a K&N Filters should observe the foam precleaner y19017 be used with wet-foam air filter oil. To complete coverage of the K&N filter Combat is respected, because the K&N filter without prefilter-oiled foam is to permeable to the off-road use.Please note:The flange on the bottom of the K&N filter has to be cut off for installation on the venturi adaptor!

€81.10*

Bergyogi DVD No sleep in Lostallo, y0857

Double-DVD set with commentaries in English language. This video covers the IFMAR World Championship Warm Up Race (May 2005) in Lostallo/ Switzerland. All top drivers likeCollari, Feldmann, Oddie and many more make this race some kind of a pre-world-championship(DVD-video, system: PAL, region code free, total run time: approx.. 200 minutes, sound: MPEG-stereo, aspect ratio: 4:3)

€13.85* €27.70* (50% saved)

y0054 Aluminum struts for roll bars and miscellaneous applications, 1 pce.

y0054 Type: y0054/04

Part No.: y0054 Aluminum struts for roll bars and miscellaneous applications, 1 pce.Available in several sizes.Aluminum tube struts for construction of roll bars, battery holders and other useful things.The struts have various bores with 2 mm diameter. Similar to picture.Item N°Internal dimension:External dimensions:Länge:y0054/018,2 mm10 mm150 mmy0054/028,2 mm10 mm180 mmy0054/038,2 mm10 mm190 mmy0054/048,2 mm9,6 mm225 mmy0054/058,2 mm10 mm190 mmy0054/068,2 mm10 mm200 mmy0054/078,2 mm10 mm170 mmy0054/088,2 mm10 mm215 mmy0054/098,2 mm10 mm300 mm

€5.90*

y0058 Shock absorber oil 10W - 20W for HPI and Mecatech Klick-Shocks, 1 pce.

y0058 Viscosity: 20w, y0058/20

Shock absorber oil, especially for HPI Baja 5B RTR and Mecatech Klick-Shocks, 100 ml bottle.HPI does not recommend silicone oil in their RTR shocks.Viscosity of silicone oil at various temperatures.

Content: 100 Milliliter (€49.00* / 1000 Milliliter)

€4.90*

y0657 Receiver battery packs standard size, NiMh, 4500 mAh

y0657 Connector: y0657/02 BEC-connector

Genuine HT spare/option part. 5 cells, 6 volt, cell size Sub-C. More applications on request.Dimensions: approx 112 x 46 x 23 mmContents:1 piece

€44.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0075 BMW 320si WTCC body shell clear, 1 pce.

Fits chassis with 535 mm wheelbase, current touring car width. EFRA and DMC homologated. Body set includes front part and main part. A rear wing is available through the shop's options menu. The body shell is vac-formed from 2 mm Lexan.Efra # 5052/06Required body mounts:Mount front: FG 7152/01 Rear body mount Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 885 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mmPainting tips:

€199.96*

Shock absorber oil 10W for HPI and Mecatech Klick-Shocks, y0058/10, 1 pce.

Shock absorber oil, especially for HPI Baja 5B RTR and Mecatech Klick-Shocks, 100 ml bottle.HPI does not recommend silicone oil in their RTR shocks.

Content: 100 Milliliter (€49.00* / 1000 Milliliter)

€4.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Shock absorber oil 20W for HPI and Mecatech Klick-Shocks, y0058/20, 1 pce.

Shock absorber oil, especially for HPI Baja 5B RTR and Mecatech Klick-Shocks, 100 ml bottle.HPI does not recommend silicone oil in their RTR shocks.

Content: 100 Milliliter (€49.00* / 1000 Milliliter)

€4.90*

Shock absorber oil 15W for HPI and Mecatech Klick-Shocks, y0058/15, 1 pce.

Shock absorber oil, especially for HPI Baja 5B RTR and Mecatech Klick-Shocks, 100 ml bottle.HPI does not recommend silicone oil in their RTR shocks.

Content: 100 Milliliter (€49.00* / 1000 Milliliter)

€4.90*

16 products found for "y0057"

Filter products

rc-car-online - Home