68323/03 FG Servo-Saver A/B, 80°

In details improved servo saver parts A+B. Through modification of the slant we improved the activation of the protective function. According to the use of the steering servo and the free movement of the servo saver the red and blue FG servo saver springs can be assembled. Suitable for the servo saver parts of servo saver 2010. Servo saver part B is made of high-strength aluminium.

Item N° 68420/05 Alum. servo saver 80°, compl., 1 pce.In details improved aluminium servo saver. Improvementthrough modification of the slant to80° for the protective function. According tothe regulating power and the number of steeringservos the red and blue FG servo saversprings can be assembled.

The mounting of the double servo saver enlarges the steering angle at the front axle. The outside front wheel achieves an essentially higher steering angle, therefore the curve radius is reduced and the model becomes more aggressive and faster in curves. This set is suitable for the Leopard 2WD Competition. To fix the set drill 4 bore holes with approx. 4,5 - 5,5mm.

The mounting of the double servo saver enlarges the steering angle at the front axle. The outside front wheel achieves an essentially higher steering angle, therefore the curve radius is reduced and the model becomes more aggressive and faster in curves. This set is suitable for the Leopard 4WD Competition.

In details improved servo saver parts A+B. Through modification of the slant we improved the activation of the protective function. According to the use of the steering servo and the free movement of the servo saver the red and blue FG servo saver springs can be assembled. Suitable for the servo saver parts of servo saver 2010. Servo saver part B is made of high-strength aluminium.

Item N° 68420/05 Alum. servo saver 80°, compl., 1 pce.In details improved aluminium servo saver. Improvementthrough modification of the slant to80° for the protective function. According tothe regulating power and the number of steeringservos the red and blue FG servo saversprings can be assembled.

The mounting of the double servo saver enlarges the steering angle at the front axle. The outside front wheel achieves an essentially higher steering angle, therefore the curve radius is reduced and the model becomes more aggressive and faster in curves. This set is suitable for the Leopard 2WD Competition. To fix the set drill 4 bore holes with approx. 4,5 - 5,5mm.

The mounting of the double servo saver enlarges the steering angle at the front axle. The outside front wheel achieves an essentially higher steering angle, therefore the curve radius is reduced and the model becomes more aggressive and faster in curves. This set is suitable for the Leopard 4WD Competition.

Item N° 60235/01 Front alum. plate Off-Road Buggy WB 535, 1 pce.Fits WB 535 Off-road.

Item N° 68323 Servo saver 4WD parts A/B, set

In details improved servo saver parts A+B. Through modification of the slant we improved the activation of the protective function. According to the use of the steering servo and the free movement of the servo saver the red and blue FG servo saver springs can be assembled. Suitable for the servo saver parts of servo saver 2010. Servo saver part B is made of high-strength aluminium.

Genuine FG spare/option part.Spare part for 8420.Contents:1 piece

The Wheelbase of the WB535 version is 60 mm longer. This modification improved the directionally stability as well as further driving qualities significantly. In addition parts of the 4WD Monster models were assembled in order to make a conversion to a 4WD model possible with low efforts. According to the large tires this model can be driven almost everywhere. The 26 cm³ engine provides sufficient power. Driving fun as well as tremendous looks are the prime characteristics of these models.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The body shell comes unpainted. A decal set with writings for further decoration is enclosed in the delivery.Technical description:The undercarriage of the Monster models is built on a 4 mm angled alloy plate. All borings for fixa- tion of the chassis parts at the bottom side are countersunk in order to prevent the screw heads from sticking out. At the front axle you have the possibility to adjust toe-in or toe-out as well as the wheel camber through track rods with right-hand/left-hand thread. The wheel camber of the rear wheels can be adjusted individually through adjusting screws with right-hand/left-hand thread. Four large-volume oil-pressure shock absorbers are mounted at the lower double wishbones of front and rear axle, these are able to absorb larger shocks of jumps to a great extent and care for an optimal road grip. All rotating drive components are supported by ball bearings. Highly stressed steel parts such as rear gearwheels, differential gears and drive components are hardened. Fuel tank and ra- dio control parts are protected through alloy plates at the sides. The body parts are made of coloured or respectively clear polycarbonate. The Monster tires with tire inserts are glued on chrome-plated rims.The models are equipped with a powerful 26 cm³ combustion engine with ready-for-use oiled air fil- ter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURAlloy spur gear carrierUse for 48T - 46 teeth spur gears.Value: 39,90 EURBall bearing set, sealed, set of 15The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 217,30 EURThe pictures may display the car with some optional items which are not included, like bed-mounted rollbar, lights, front bumper or mirrors. These items can be added in the drop down menus.The RTR version is delivered with assembled and preset radio control system and rechargeable batteries. To complete the non-RTR version all popular servos and radio control sys- tems are suitable.Dimensions: Length: 780 mm Width: 510 mm Height: 350 mm Wheelbase: 353 mm

The mounting of the double servo saver enlarges the steering angle at the front axle. The outside front wheel achieves an essentially higher steering angle, therefore the curve radius is reduced and the model becomes more aggressive and faster in curves. This set is suitable for the Leopard 4WD Competition.