y0700/01 Single-sided alloy servoarm, 1 pce.
Item N° y0700/01 Single-sided alloy servoarm, 1 pce.Suitable for all servos with an output shaft with 25 teeth multi-tooth shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!When you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.
y0700 Double sided alloy servoarm, 1 pce.
Item N° y0700 Double sided alloy servoarm, 1 pce.Suitable for all servos with an output shaft with 25 teeth multi-tooth shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!When you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.
y2006/02 single-sided split aluminium servo arm 17 teeth, 1 pc.
Split aluminium servo lever for more gentle screwing (with a 2.0 mm Allen key) with clamping on the servo output shaft!For servos that have an output shaft with a 17 mm multi-tooth shaft. For our y2006 Top Tuning digital Pro Servo 40 Kg Mounting holes with 3 mm diameter If you count the teeth on your servo, you can determine whether this aluminium arm fits your servo. Aluminium servo arms are indispensable for powerful digital servos, such as those used in large-scale models. Translated with DeepL.com (free version)
y0711 Double sided split alloy servoarm for Savöx SV-0236MG, Rhino and Hitec 805 servo
Splitted Alloy servoarm for a more protecting screw connection (with a 2,0 mm allen head screw driver) causing stiffness on the servo output shaftSuitable for all servos with an output shaft with 15 tooth spline shaft, for example:Multiplex RhinoHitec 805Savöx SV-0236MGLOSB 0886 S901T (Original Losi 5ive-T throttle Servo servo)LOSB 0884 S900S (Original Losi 5ive-T steering servo)and many more!holes for linkage with M3 threadWhen you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.Content:1 pieces
304032-24 Carson Arm B054 for steering servo, WIld GP Attack
Genuine Carson spare/option part. Contents:1 piece
SB015TSH GPM aluminum split servo horn for 15T shaft
Genuine GPM spare/option part. Extremely sturdy split-style servo horn, fits servos with 8 mm/15T output shaft (e.g. DM4000, large Savöx/Losi/Hitec, Multiplex Rhino etc.). It is therefore also suitable for use in many other applications. Linkage mounting holes tapped for M4 screws.Contents:1 piece
AT-DBXL003 ATOP aluminum throttle/brake servo horn for Losi DBXL/DBXL-E
Genuine ATOP spare/option part. CNC-machined from 6061 aluminum, significantly stronger and more rigid than any plastic version. Doule-sided anodized aluminum servo horn, available in 15T and 18t spline version. Three smooth 2.5 mm holes per side. 15T fits:Savöx 0236 MGSavöx 0235Losi 900and many other servos with 15T spline shaft18T fits:Spektrum DBXL-servo SPMS901Contents:1 piece
DM4000/01 Alloy servo arm for K-Power, Losi, Savöx, Spektrum, Rhino, Hitec and many more
Genuine K-Power spare/option part.One-piece aluminum servo arm, 67 mm long and 3 mm thick, with 10 linkage hole tapped for M3 screws.Suitable for all servos with an output shaft with 15 tooth spline shaft, for example:K-Power DM4000Multiplex RhinoHitec 805Savöx SV-0236MGSpektrum S9010 and S9020LOSB 0886 S901T (Original Losi 5ive-T throttle Servo servo)and many more!When you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servo arms are indispensable by strong digital servos, as used on large scale models for example, to optimize the servo forces being transferred.Content:1 pieces
y0701/01 Single-sided split alloy servoarm
Splitted Alloy servoarm for a more protecting screw connection (with a 2,0 mm allen head screw driver) causing stiffness on the servo output shaft!Suitable for all servos with an output shaft with 25 tooth spline shaft, for example:y2006 Digital Big-Scale Servo D-21HV Nearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!holes for linkage with 3 mm diameterWhen you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.Content:1 piece
y2006/01 Double-sided split aluminium servo arm 17 teeth, 1 pc.
Split aluminium servo lever for more gentle screwing (with a 2.0 mm Allen key) with clamping on the servo output shaft! For servos that have an output shaft with a 17 mm multi-tooth shaft. For our y2006 Top Tuning digital Pro Servo 40 Kg Mounting holes with 3 mm diameter If you count the teeth on your servo, you can determine whether this aluminium arm fits your servo. Aluminium servo arms are indispensable for powerful digital servos, such as those used in large-scale models.
87280 HPI Alloy servo horn for SFL-10 servo
Genuine HPI spare/option part. Distances bore to center of servo horn: 26 and 31 mm. Holes tapped with M3 thread.This aluminum steering arm is built extra tough to handle the demands of 1/5th scale vehicles. Use it as a replacement part on the Baja 5T HPI SFL-10MG2 servo, or as an upgrade to the stock plastic servo arm used on the SFL-10 and HPI SFL-MG servos. HPI recommends upgrading to the metal servo gears if upgrading the stock plastic servo arm.Contents:1 piece
y0711/01 Single-sided split alloy servoarm for Savöx SV-0236MG, Rhino and 805er Servo
Splitted Alloy servoarm for a more protecting screw connection (with a 2,0 mm allen head screw driver) causing stiffness on the servo output shaft!Suitable for all servos with an output shaft with 15 tooth spline shaft, for example:Multiplex RhinoHitec 805Savöx SV-0236MGLOSB 0886 S901T (Original Losi 5ive-T throttle Servo servo)LOSB 0884 S900S (Original Losi 5ive-T steering servo)and many more!holes for linkage with M3 threadWhen you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.Content:1 pieces
6536/01 FG Alloy servo arm JR/Multiplex 23 teeth
Genuine FG spare/option part.Contents:1 piece
AT-DBXL005 ATOP aluminum steering servo horn 15T, double-sided for Losi DBXL/DBXL-E
Genuine ATOP spare/option part. CNC-machined from 6061 aluminum, significantly stronger and more rigid than any plastic version. Doule-sided anodized aluminum servo horn with 15T spline. Three M4 threaded holes per side. Fits:Savöx 0236 MGSavöx 0235Losi 900and many other servos with 15T / 8mm spline shaftContents:1 piece
AT-DBXL004/02 ATOP aluminum steering servo horn for Losi DBXL/DBXL-E 18 teeth
Genuine ATOP spare/option part. CNC-machined from 6061 aluminum, significantly stronger and more rigid than any plastic version. Single-sided anodized aluminum servo horn, available in 18t spline version. Three M4 tapped holes for the linkage. 18T fits:Spektrum DBXL-servo SPMS901Contents:1 piece
6536 Servo arm JR/Multiplex - 2pcs.
Rugged plastic servo arm for all saleable servos, mm holes, suitable for all car models. Arm thickness 4 mm.2 pieces
y1101 Servo horn mounting screws, 10 pcs
Item N° y1101 Servo horn mounting screws, 10 pcsReplacement screws for mounting the servo horn on the servo shaft.Part is delivered in silver or black color from vendor!Choises:y1101/01Fit:Multiplex Jumbo and Power MCFG 6598 Savöx-Servo SC-0251MGFG 6599 Savöx-Servo SC-1256TG Measures: M3 x 8 mmy1101/02Fit:Multiplex RhinoHitec 805 MGHitec 9805 MGFutaba S3152 Measures: M2,5 x 10 mm Torxy1101/03Fit:Futaba und Robbe diverse ServosPlease check the required dimensions! Measures: M2,5 x 6 mm Torxy1101/04Fit:402115 Mega Power-Servo, metal gears Measures: M3 x 10 mm y1101/05Fit:Ace DS1015 Super Torque Digital Servo, y1051 Measures: M3 x 10 mm
HSF0000655 DYMOND 5-in-1 Smart Battery Meter (battery and servo tester)
Genuine Dymond spare/option part. Contents:1 piece
6538/03 FG Alloy Servo arm Hitec
Genuine FG spare/option part. New developed alum. servo arm in high-strength material with M3 threaded holes for the assembly of the throttle pivot posts 06534/02 and 06534/03.Fits Hitech HS-7955 and HS-5585MH.Contents:1 piece
DYNR0112 Dynamite Alloy Throttle Servo arm 15T for Losi DBXL
Genuine Dynamite spare/option part.New Dynamite large scale servo arms are machined from high quality 7075 T6 aluminum material to withstand the high demand of giant scale RC surface applications.Fits servos with 8 mm / 15T shaft like i.e. Savöx 236, Losi S900S, Losi S 901, Spektrum 9010 and 9020.Features:Perfect fit every time CNC Machined for consistent and accurate tolerancesHigh Strength Made with 7075 T6 AluminumSecure connection Clamping styleGreat looks Red anodized aluminumContent:1 piece
y2007/05 Servo arms und supplies for Digital large scale Brushless Servo y2007
Genuine HT spare/option part.Servo arms und supplies for Digital Big-Scale Brushless Servo #y2007Contents:1 piece
y0750/03 Rubber grommets with inserts for Orange Power and S8203 servo, set
Item N° y0750/03 Rubber grommets with inserts for Orange Power and S8203 servo, setFits Orange Power and S8203 servos.It is also absolutely mandatory to use the rubber grommets along with the brass bushing inserts for installation.Content:Rubber grommets: 4 pcs.Brass insert: 4 pcs.
Spektrum SSPMSP1052 Gear set with top case for S9010
Genuine Spektrum spare/option part.Contents:1 set
y0769 Heavy duty plastic servo arm for Smartech 301502 servo, 3 pcs.
Item N° y0769 Heavy duty plastic servo arms for Smartech 301502 servo, 3 pcs.Heavy duty plastic servo arm with a total l^enght of 50 mm and six mounting positions.Content:Thee peaces