y0701/01 Single-sided split alloy servoarm
€11.90
% €12.90 (7.75% saved)
Available
Product information "y0701/01 Single-sided split alloy servoarm"
Suitable for all servos with an output shaft with 25 tooth spline shaft, for example:
- y2006 Digital Big-Scale Servo D-21HV
- Nearly all Robbe/Futaba servos
- Mega Power servo
- Thunder Tiger DS1015
- Savöx servos
- and many more!
- holes for linkage with 3 mm diameter
When you count the teeth of your servo you can check if this alloy arm will fit to your servo.
Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.
Content:
- 1 piece
Nauenweg 55
47805 Krefeld
Germany
Login
Accessories / Spare parts
Top quality spare tips, 2.5 mm.Fits GPM-Roadtech handles from screw driver set y0600. 1 piece
Top quality spare tips, 3.0 mm.Fits GPM-Roadtech handles from screw driver set y0600.
Alternatives
Item N° y0700 Double sided alloy servoarm, 1 pce.Suitable for all servos with an output shaft with 25 teeth multi-tooth shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!When you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.
Item N° y0700/01 Single-sided alloy servoarm, 1 pce.Suitable for all servos with an output shaft with 25 teeth multi-tooth shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!When you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.
Splitted Alloy servoarm for a more protecting screw connection (with a 2,0 mm allen head screw driver) causing stiffness on the servo output shaftSuitable for all servos with an output shaft with 25 tooth spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!holes for linkage with 3 mm diameterWhen you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.
Customers also viewed
Genuine HPI spare/option part. Distances bore to center of servo horn: 26 and 31 mm. Holes tapped with M3 thread.This aluminum steering arm is built extra tough to handle the demands of 1/5th scale vehicles. Use it as a replacement part on the Baja 5T HPI SFL-10MG2 servo, or as an upgrade to the stock plastic servo arm used on the SFL-10 and HPI SFL-MG servos. HPI recommends upgrading to the metal servo gears if upgrading the stock plastic servo arm.Contents:1 piece
Genuine ATOP spare/option part. CNC-machined from 6061 aluminum, significantly stronger and more rigid than any plastic version. Single-sided anodized aluminum servo horn, available in 18t spline version. Three M4 tapped holes for the linkage. 18T fits:Spektrum DBXL-servo SPMS901Contents:1 piece
Alloy servo arms are a must for strong digital servos, as used in large scale models.This aluminum servo horn fits servos before June 2013 with 5,75 mm 25-spline output shaft.For servos from June 2013 and up with a 8.75 mm 17-spline output shaft please use aluminum servo horn y0750/01, y0750/02.Four different aluminum servo arms are available for the digital power servo No. S5803 and the Smartech servo no. 301502. The slotted aluminum servo horns provide a gentle clamping on the servo's output shaft (using a 2.0 mm Allen wrench).
Great duo charger for hobby use. • Dual power supply (AC/DC) Input voltage AC: 100 ~ 240V • Input voltage DC: 11 ~ 18V max • Output power 80W (maximum charge) 5W (discharge) • Charging current 0.1 ~ 7.0 A • Discharge current 0.1 ~ 1.0 A • Balancer current for Li-Po 300 mAh • Number of cells Ni-Cd/NI-MH 1 to 15 cells • Number of cells Li-XX 1 to 6S • Voltage lead battery 2 to 20V • Weight 869 g • Dimensions 98 mm x 145 mm x 195 mm • Included: Balancer plate (2x) • Cable: JST/BEC - Crocodile clips-XT60 • Rec. - Tamiya - Dean 1 piece
Genuine ATOP spare/option part. CNC-machined from 6061 aluminum, significantly stronger and more rigid than any plastic version. Doule-sided anodized aluminum servo horn with 15T spline. Three M4 threaded holes per side. Fits:Savöx 0236 MGSavöx 0235Losi 900and many other servos with 15T / 8mm spline shaftContents:1 piece