6538/03 FG Alloy Servo arm Hitec

€19.90*

Available

Product number: fg_6538_03

EAN: 3410564537824

Product information "6538/03 FG Alloy Servo arm Hitec"

Genuine FG spare/option part.

New developed alum. servo arm in high-strength material with M3 threaded holes for the assembly of the throttle pivot posts 06534/02 and 06534/03.

Fits Hitech HS-7955 and HS-5585MH.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Similar products

6547 FG Receiver cable FG gold contact/Futaba - 1pce.

Receiver cable, ready-made with FG gold contact plug-in system for Futaba plug.total length 20-25cm

€17.90*

6544/01 FG Charging cable EC8 with gold contacts

Genuine FG spare/option part.Contents:1 piece

€13.90*

6546/02 FG receiver battery Ni-MH 6V 3600mAh

Genuine FG spare/option part.Measures:Width: 111 mmHeight: 47 mmDepth: 23 mmContents:1 piece

€37.50*

6540 FG Receiver box

Genuine FG spare/option part. Splash-proofed receiver box for all merchantable small receivers, suitable for all car models 1:12 - 1:5.Dimensions:Length: upper section 92 mm, bottom 69 mmHeight: 48 mmWidth: 38 mmContents:1 piece

€13.90*

6545 FG gold contact plug-in system 2mm - 2pcs.

Item N° 6545 FG gold contact plug-in system 2mm - 2pcs.Reverse battery protected gold contact plug-in system. A further great advantage of our plug-in system is the fixing of a plug on the receiver box or rc-plate with screws. This makes the connection of plug and bush easier.

€7.90*

6538/01 Servo arm MPX rhino / Hitec 805

Alloy servo arm made of high-strength alloy material.Length over all 53 mm.Distances bore to center of servo horn: 11.5 / 17.5 / 23.5 mm. Inner holes 2.2 mm, middle and outer ones with M3 thread.Content:1 piece

€19.90*

6536/01 FG Alloy servo arm JR/Multiplex 23 teeth

Genuine FG spare/option part.Contents:1 piece

€9.90*

6544 FG Charging cable for receiver battery with FG plug

Genuine FG spare/option part. Polarized and gold plated connector system.Content:1 piece

€17.90*

6545/01 FG gold contact plug-in system 2mm - 10pcs.

Item N° 6545/01 FG gold contact plug-in system 2mm - 10pcs.Reverse battery protected gold contact plug-in system. A further great advantage of our plug-in system is the fixing of a plug on the receiver box or rc-plate with screws. This makes the connection of plug and bush easier.

€39.90*

FG 6556 Power Pack 2S 7.4V 6000mAh 60C

Genuine FG spare/option part.High-capacity battery.Dimensions:138 x 45 x 24 mContents:1 piece

€107.95*

This product is currently not available.

6558 FG Y-cable Futaba

The Y-cable is required to drive two servos from a single receiver channel.Content:1 piece

€11.10*

6561/01 FG Hitec Transmitter Aggressor - 1pce.

Ergonomically designed 3 Channel FM Transmitter for RC cars, boats and motor bikes in a modern design, handy and light.- Servo reversing on channel 1+2- 3 LED battery status indicators- Low Battery Alarm- Dual rate steering- Charging Jack- Foam steering wheel

€64.70*

Customers also viewed

y0711 Double sided split alloy servoarm for Savöx SV-0236MG, Rhino and Hitec 805 servo

Splitted Alloy servoarm for a more protecting screw connection (with a 2,0 mm allen head screw driver) causing stiffness on the servo output shaftSuitable for all servos with an output shaft with 15 tooth spline shaft, for example:Multiplex RhinoHitec 805Savöx SV-0236MGLOSB 0886 S901T (Original Losi 5ive-T throttle Servo servo)LOSB 0884 S900S (Original Losi 5ive-T steering servo)and many more!holes for linkage with M3 threadWhen you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.Content:1 pieces

€14.90*

05.2905.01 OSKART Servo Saver

Genuine OSKART Servo Saver spare/option part.Fits 1/2 scale OSKART.Contents:1 set

€85.00*

6535/01 Alloy servo arm Futaba / Thunder Tiger DS1015

New developed alum. servo arm in high-strength material with M3 threaded holes for the assembly of the throttle pivot posts 06534/02 and 06534/03. The fitted transverse slot makes the mounting of the servo arm on the servo toothing much easier.Measures:Total length: 53 mmWidth: 10 mmThickness: 3,1 mmThread: 3 mm

€14.90*

AT-DBXL003 ATOP aluminum throttle/brake servo horn for Losi DBXL/DBXL-E

at_dbxl003 Version: AT-DBXL003-02 with 18 teeth

Genuine ATOP spare/option part. CNC-machined from 6061 aluminum, significantly stronger and more rigid than any plastic version. Doule-sided anodized aluminum servo horn, available in 15T and 18t spline version. Three smooth 2.5 mm holes per side. 15T fits:Savöx 0236 MGSavöx 0235Losi 900and many other servos with 15T spline shaft18T fits:Spektrum DBXL-servo SPMS901Contents:1 piece

€14.90*

6547 FG Receiver cable FG gold contact/Futaba - 1pce.

Receiver cable, ready-made with FG gold contact plug-in system for Futaba plug.total length 20-25cm

€17.90*

586 Alloy servo arm for Digital Power Servo no. S8203, 1 pce.

smartech_586 Version: 58612 Single-sided split+ 5EUR

Alloy servo arms are a must for strong digital servos, as used in large scale models.This aluminum servo horn fits servos before June 2013 with 5,75 mm 25-spline output shaft.For servos from June 2013 and up with a 8.75 mm 17-spline output shaft please use aluminum servo horn y0750/01, y0750/02.Four different aluminum servo arms are available for the digital power servo No. S5803 and the Smartech servo no. 301502. The slotted aluminum servo horns provide a gentle clamping on the servo's output shaft (using a 2.0 mm Allen wrench).

Variants from €7.90*

€12.90*

66237/01 FG Gilmer belt 15mm, 530/535 long, 1 pce.

Item N° 66237/01 Gilmer belt 15mm, for Leopard 4WD 530, Offroad 4WD 535 and Sportline TW 4WD 535, 1 pce.

€54.90*