87280 HPI Alloy servo horn for SFL-10 servo

€9.99*

Prices incl. VAT plus shipping costs

Available

Product number: hpi.h87280

EAN: 4944258872803

Product information "87280 HPI Alloy servo horn for SFL-10 servo"

Genuine HPI spare/option part.

Distances bore to center of servo horn: 26 and 31 mm. Holes tapped with M3 thread.

This aluminum steering arm is built extra tough to handle the demands of 1/5th scale vehicles. Use it as a replacement part on the Baja 5T HPI SFL-10MG2 servo, or as an upgrade to the stock plastic servo arm used on the SFL-10 and HPI SFL-MG servos. HPI recommends upgrading to the metal servo gears if upgrading the stock plastic servo arm.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Similar products

87422 HPI Gear plate Baja 5B

Genuine HPI spare/option part. Color: purple.Contents:1 piece

€22.90*

87430 HPI Roof plate Baja 5B

Genuine HPI spare/option part. Contents:1 piece

€19.99*

86479 HPI Axle boots 22 x 47 mm

Genuine HPI spare/option part. Contents:4 pieces

€8.50*

87411 HPI Rear lower brace A Baja 5B

Genuine HPI spare/option part. Color: purple.Dimensions: 6 x 70 x 4 mm.Contents:1 piece

€9.88*

86635 HPI Shaft 6 x 108 mm

Genuine HPI spare/option part. Contents:2 pieces

€22.90*

y86479 HighElastic driveshaft boots 47 mm, choice of colors, 4 pcs.

y86479 Color: y86479/01 - Black

Highly flexible driveshaft boots, equivalent to HPI part # H86479.Available in the following colors:y86479/01 - blacky86479/02 - redy86479/03 - orangeContents:4 pieces

€12.90*

86927 HPI O-rings P6 6 x 2 mm, clear

Genuine HPI spare/option part. Contents:12 pieces

€7.90*

86610 HPI heavy duty driveshaft 15 x 120 mm

Genuine HPI spare/option part. One-piece shaft and ball ends. Come with shaft boots 22 x 47 mm included.From HPI Racing are these Heavy Duty Drive Shafts for the Baja 5B! Thicker and tougher than the stock drive shafts, these are the perfect upgrade for Baja 5B owners who are modifying motors and or pushing the performance envelope.Contents:2 pieces

€49.90*

Details

87410 HPI Front lower brace Baja 5B

Genuine HPI spare/option part. Color: purple.DImensions: 6 x 60 x 4 mm.Contents:1 piece

€5.99*

86667 HPI Shaft seal 12 x 21 x 2 mm

Genuine HPI spare/option part. Contents:4 pieces

€13.70*

86601 HPI Brake cam

Genuine HPI spare/option part. Contents:1 piece

€7.99*

87403 HPI Main Chassi Baja 5B

Genuine HPI spare/option part. Color: purple.Contents:1 piece

€149.90*

This product is currently not available.

Customers also viewed

105409 HPI D-Box 2 adjustable stability control system

Genuine HPI spare/option part.The D-BOX 2 is the Secret Weapon for your driving and drifting!The HPI D-BOX 2 is developed for RC cars of all types - it's not just for drifters! From the Baja 5B to the Micro RS4 - the D-Box 2 is for you! - You can use the D-BOX 2 on slippery surfaces like wet paved surfaces, muddy conditions, loose dirt and wet clay tracks to give you perfect control in the turns. Simply connect the super-small D-BOX 2 between your receiver and steering servo for an amazing difference in your driving performance!This makes the D-BOX 2 perfect for nitro racers, touring car drivers, Baja and monster truck owners, bashers and more!Perfect for Drift Drivers!The D-BOX 2 is the perfect item to help you get long drift distances and the perfect drift angle, for a dramatic improvement to your drift driving! Just change the Sensitivity Mode Switch to help alter your car's angle through the turns!Massively Improved over the Original D-BOX!The D-BOX 2 is a huge improvement on the earlier ground-breaking HPI D-Box. The original D-BOX has the capability of adjusting the gyro sensitivity. Steering response may be reduced, which will make the car more stable. In turn, it under steers when cornering.While the first generation D-BOX cannot tell if the motion is coming from the car or radio, the new D-BOX 2 has an amazing feature that improves response when the gyro sensitivity is increased (Patented steering operation priority system) using the Mode switches (see below). This new priority system allows the steering inputs from the transmitter to have priority over the gyro. While the D-BOX 2 is perfect for all types of vehicles, this gyro correction is seen the most when used in high-powered off-road cars: increasing the throttle will not spin the car out, even in slippery conditions! The D-BOX 2 will also prevent sliding in sudden braking or steering.Exclusive Sensitivity Mode SwitchThe HPI D-BOX 2 allows you to set 4 sensitivity modes using 2 switches. Mode 0 has the characteristics of the original D-BOX, with gyro compensation present from the steering action provided by your radio signal. You can get more steering control and less gyro compensation as you change the modes up to Modes 1, 2 and 3 - if you want earlier steering response through the transmitter and less from the gyro, simply change the mode to a higher number. Test drive the different modes to find the optimal driving mode for your preference! Specifications:Dimensions: 26,5 x 27,0 x 10,0 mm (excluding wire)Weight: 9.5gOperating voltage: 4,8V - 7,4VPower consumption: 10 mA/6VNeutral servo signal: 1,5 m/Sec (1,45-1,55 m/Sec)Servo signal cycle: 3 - 22 m/Sec (Digital servo mode support)Contents:1 piece

€84.90*

Split alloy servoarm for K-Power, Savöx, Spektrum, Rhino, Hitec and many more Servos with 15 tooth spline shaft

y0711_alle Version: y0711/01 Single-sided split alloy servoarm

Splitted Alloy servoarm for a more protecting screw connection (with a 2,0 mm allen head screw driver) causing stiffness on the servo output shaftSuitable for all servos with an output shaft with 15 tooth spline shaft, for example:K-Power DM4000Multiplex RhinoHitec 805Savöx SV-0236MGSpektrum S9010 and S9020LOSB 0886 S901T (Original Losi 5ive-T throttle Servo servo)LOSB 0884 S900S (Original Losi 5ive-T steering servo)Losi SPMS904 WPand many more!holes for linkage with M3 threadWhen you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.Content:1 pieces

€14.90*

DYNR0113 Dynamite Alloy Steering Servoarm 15T Spline for HPI Baja

Genuine Dynamite spare/option part.New Dynamite large scale servo arms are machined from high quality 7075 T6 aluminum material to withstand the high demand of giant scale RC surface applications.Fits servos with 8 mm / 15T shaft like i.e. Savöx 236, Losi S900S, Losi S 901, Spektrum 9010 and 9020.Features:Perfect fit every time CNC Machined for consistent and accurate tolerancesHigh Strength Made with 7075 T6 AluminumSecure connection Clamping styleGreat looks Red anodized aluminumContent:1 piece

€19.99*

Details

SB015TSH GPM aluminum split servo horn for 15T shaft

Genuine GPM spare/option part. Extremely sturdy split-style servo horn, fits servos with 8 mm/15T output shaft (e.g. DM4000, large Savöx/Losi/Hitec, Multiplex Rhino etc.). It is therefore also suitable for use in many other applications. Linkage mounting holes tapped for M4 screws.Contents:1 piece

€14.90*

304032-24 Carson Arm B054 for steering servo, WIld GP Attack

Genuine Carson spare/option part. Contents:1 piece

€14.90*

y0700/01 Single-sided alloy servoarm, 1 pce.

Item N° y0700/01 Single-sided alloy servoarm, 1 pce.Suitable for all servos with an output shaft with 25 teeth multi-tooth shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!When you count the teeth of your servo you can check if this alloy arm will fit to your servo. Alloy servoarms are indispensable by strong digital servos, as used on big scale models for example, to optimize the servo forces being transferred.

€8.90*