Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

Quad body for FG Monster Truck 2WD

Product information "Quad body for FG Monster Truck 2WD"

Pick up and view possible!
Shop hours:
Mon. - Fri .: 9:00 to 18:00 / Sat.: 9:00 to 13:00
Technically sound, may show some signs of wear.


New body with paint defects.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Similar products

Average rating of 0 out of 5 stars

y0784/23 Seat Toledo body shell with Repsol painting One of a kind
Defects:The color of the bodywork has been slightly altered by exposure to the sun in the window dressing (see photos).Fits 535 wheelbase

€390.00*

Average rating of 0 out of 5 stars

Elcon Cleon rear wing, clear
Genuine Elcon Cleon rear wing, clear.Painting tips:

€19.90*

Average rating of 0 out of 5 stars

y1453/02 Elastoplastic Losi 5ive-T/2.0 body shell, red, used
Decal sheet is attached. Body shell series is in mint, good condition!Delivered without roll cage!Extremely flexible 6-piece body shell for Losi 5ive-T, with complete installation hardware.Made of thermoplastic elastomer (TPE), an extremely strong plastic which combines thermoplastic and elastomeric properties! The elastoplastic body set fits the stock Losi 5ive-T roll cage precisely and is almost "unbreakable"! Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells.Of course, the extreme deformability of the elastoplastic body shell, compared to the stock version, is a huge advantage.And there's more with the elastoplastic body shell:Better dirt protection for the 5ive-T through partially closed wheel wells front and rear.Front and rear fenders with large cut-outs prevent contact with the tires.Integrated window nets allow for improved airflow and better engine cooling.The textured surface of the elastoplastic body shell is largely soil-resisting.Please note: This feature also makes the use of highly specialised adhesives for any kind of decals unavoidable if you want them to stay. All decals shown in the pictures for presentation are of the standard version!Even though the elastoplastic body shell is much tougher than the stock Losi 5ive-T body, the weight increase only very moderate from 902 grams to 971 grams. The body shell is a 6-piece design for best flexibility possible.Contents:1 x hood/front fender2 x side panels1 x roof2 x rear fenders1 x complete installation hardware

€179.00*

Average rating of 0 out of 5 stars

54140/01 FG body TR2 and TR4, painted exhibition piece
FG TR2/TR4 body from our showroom, ready painted. The rear holes for the body mounting are double drilled. See photos for scope of delivery and condition. 1 piece

€120.00*

Average rating of 0 out of 5 stars

Hemistorm Penta body set for Losi 5ive-T, painted white
1 set Hemistorm Penta body kit, 5-piece.  The body fits on the Losi 5ive-T cage. See photos for condition and scope of delivery.

€199.00*

Average rating of 0 out of 5 stars

MCD Audi TT ready painted, wheelbase 520 mm, exhibition piece
Pick up and view possible! Shop hours: Mon. - Fri .: 9:00 to 18:00 / Sat.: 9:00 to 13:00 Technically sound, may show some signs of wear. painted Audi TT body shell by MCD with decals set applied. The body shell is an exhibition piece and shows several signs of use like a big paint burst and spilled glue on the front. Otherwise rather small scratches. Dimensions:Wheelbase: 520 mmWidth: 380 mmLength 860 mmHeight: 270 mm

€199.90*

Average rating of 0 out of 5 stars

y0784/31 BMW E46 body shell with Mafia team decals
Flaws:The paint flakes off at several points on body shell, mirrors or door handlesOne hole for the body mount is tornRequired body mounts:Mount front: Rear body mount:Side body mount front: Side body mount rear: Measures:Length: 890 mmWidth: 392 mmHeigth: 245 mmWheelbase: 530 mm

€269.90*

Average rating of 0 out of 5 stars

y0784/03 Audi A4 body shell with silver painting
Defects:Some glue remainingson the window frame.Small cut in the left fenderl. The body shell shows several signs of wear (see pics).Measurements:Lenght: 890mmWidth: 380mmHeight: 250mmWheel base: 535mm

€219.90*

Average rating of 0 out of 5 stars

Losi 5ive-T Race body with cage, used
1 piece Losi 5ive-T Race body tipped and painted with cage, used. The body has damage and cracks.  See photos for scope of delivery and condition.

€149.90*

Average rating of 0 out of 5 stars

Painted Porsche 962C body 1:5 for 530/535 mm wheelbase with rear spoiler, drilled
Suitable for 2WD models with a 535 wheelbase, such as FG, Carson and almost all other 1:5 touring cars. The body was deep-drawn from 2 mm thick Lexan. See photos for condition and drillings. Due to the low height of the body, the flatter airbox from FG with order number 9043 is required. Completely painted body for the 1:5 wheelbase 530/535 mm. With rear spoiler, wing mirrors and decal set. Body supports required: Front part: FG 7020/14 Front bumper Rear carrier: FG 7155 Rear body support Front side: FG 3014 Body support Rear side: FG 3014 Body mount Contents 1 piece

€249.00*

Average rating of 0 out of 5 stars

Monster Truck Body shell for Carson and FG models, clear
Pick up and view possible! Shop hours: Mon. - Fri .: 9:00 to 18:00 / Sat.: 9:00 to 13:00 Technically sound, may show some signs of wear. Body dimensions: Length 750 mm Width 300 mm Wheelbase 465 mmBody mounts need to be customized depending on the model. The body is untrimmed and unpainted.

€99.90*

Customers also viewed

Average rating of 0 out of 5 stars

68510 FG Electric conversion kit 1:6 2WD for 465 Wheelbase, set
Item N° 68510 Electric conversion kit 1:6 2WD for 465 Wheelbase, setSuitable for 2WD Buggy and Monster models as Marder, Beetle, Monster-Truck, Hummer, Jeep a.s.o with 465 mm wheelbase.This conversion kit is suitable for the 2WD FG models Marder, Beetle, Off-Road Buggy and Monster models with 465mm wheelbase. Suitable for the electric engines from FG Modellsport, Leopard BL engines and Castle Creation. The conversion kit includes gear and engine mount, fixing parts for cruise control and LiPo batteries. Cruise control, BL engine and LiPo batteries are not included. During the conversion several fixing holes have to be applied to the chassis. Gear transmission has to be changed accordingly to the use of the electric engine.For easy mounting we recommend LiPo batteries with a max. length of 150mm and 50mm width.The conversion kits include all mechanical parts (except electric engine with speed control, Lipo batteries) to convert your FG model scale 1:5 and 1:6 to an electric powered system.

€194.50*

Average rating of 0 out of 5 stars

6000CZ30 FG Marder 2WD Legend 30 Years - limited and numbered special edition
To celebrate the 30th anniversary of the legendary Marder 1/6 scale 2WD buggy, FG Modellsport/T2M releases a special edition, limited to 300 numbered pieces, with the original signature of Franz Gröschl on the sticker sheet as well as a top equipment (G260RC Zenoah engine, hi-capacity low friction aluminum shock absorbers and special aluminum engine mounts). with original 260 Zenoah with Low-Friction Alu shocks with alloy enginemount The Models is built on a 4 mm u-bended chassis. All borings of the lower side are countersunk, therefore the screw heads can't bear out.Double wishbones at font and rear axle as well as 4 bulk oil-pressure shock absorbers guarantee perfect ground adherence. All rotating parts are supported by ball-bearings. Rear gear wheels, differential gears and all driving elements are case-hardened. The side guards protect the model from dirt. With original signature of Franz Gröschl. The model is equipped with a powerfull 26 ccm engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 liters enables you to drive about 45 minutes. The engine can be started without difficulties through the integrated pull-start. To complete the models all merchantable servos and radio control systems are suitable.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery

€799.99*

Average rating of 0 out of 5 stars

10000E FG Formel 1 Sportsline Electric
The FG Sportsline Formula 1 electric convinces not only by its appearance, but rather by its technical achievements. The unique details such as push rods, horizontal oil pressure shock absorbers, double wishbone and much more can be found in almost no other model.The chassis is built on a high-strength 5mm aluminum chassis plate and thus offers extreme stability. Countersunk holes in the chassis plate allow the screws to be flush, ensuring a flat surface under the model. Versatile adjustment options on the front and rear axles allow the model to be perfectly adapted to your own needs. Adjustments such as camber, caster, etc. are no problem whatsoever, even for beginners, and are made via the double a-arms, which provide maximum stability at the rear axle by means of additional track rods. Also the adjustable aluminum oil filled shock absorbers convince on full length and offer maximum performance even on a very difficult underground. The above mentioned push-rod suspension enables play-free power transfer from the suspension to the shock absorbers, which is essential for precise driving.The factory-mounted combination of 980KV motor and 160A MAX6 esc provides performance that is second to none. With a 6S 22.2V (4S 14.8V is also possible) LiPo batteries, the motor reaches a final speed of about 25,000 rpm, leaving a comparable combustion engine far behind. The braking is done by the 980KV motor and is very strong. Within a few meters the model comes from top speed to a standstill. Those who have searched in vain for reverse gear with a combustion engine will find it with the electric version. The operation is very easy, if you press the brake lever once, you hit the brakes. If you press the brake lever twice, you shift into reverse. With the help of a programming card (available separately) you can adjust all ESC values according to your needs. This includes setting options for power, brake force, low-voltage protection and much more. Furthermore, the model has the following technical: Features: 160A MAX6 esc, 6S compatible (4S also possible) 980KV brushless motor Waterproof components Adjustable aluminum oil filled shock absorbers Aluminum levers for the shocks Aerodynamic Lexan body shell 5mm thick aluminum chassis plate Mounting compartment for steering servo Mounting compartment for separate brake servo (for mechanical/hydraulic brakes) Cogged belt drive Side battery mounts for optimal weight distribution Custom CNC machined motor mount Unique double a-arms Push rod suspension Treaded F1 tires Tuning ball drive shafts Dimensions: Length: 960 mm BrWidtheite: 440 mm Height: 230 mm Wheelbase: 620 mm Technical data 980KV brushless motor: Max. Voltage: 33V Max. Current: 130A Max. Speed: 30.000RPM Power in watts: 4250W Rotor poles: 4 No-load current: 2.8A Resistance: 0.0128 Length: 82mm Diameter: 55 / 58mm with fins Weight: 880g Shaft diameter: 8mm Free shaft length: 30mm Weight: 880g Technical data Max6 esc: Continuous current: 160A Peak current: 1050A Battery: 3S - 8S LiPo or 9-24 cells NiMH BEC: 6V/7,2V - 3A/6A Abmessungen:70x56x46,5mm Weight: 240g Note: In our online shop you can also find a detailed 360° illustration, where especially the technology of the FG Formula1 electric chassis can be seen.Note battery mounting:When mounting the l/h side LiPo battery, you must always make sure that it does not rub against the drive pulley. For this purpose, a 5 mm thick piece of foam mat or something similar between battery and battery holder is sufficient to ensure an appropriate distance. For driving you still need: 2 drive batteries incl. charger Battery dimensions maximum: Length 143 mm/5,6 Width 48 mm/1,9 Height 40 mm/1,6 Connector EC8 The RTR equipment (remote control and steering servo!) The body shell comes unpainted! In our online store you can use our store configurator (shopping cart selection / options menu) to add the desired parts, as well as the completely painted body. Here at our Ebay offer selectable: RTR equipment (remote control and steering servo) fully assembled! Painted body shell incl. decals Formular 1 models in action!

€1,348.95*

Average rating of 0 out of 5 stars

Elcon differential with quick-release axles for ball drive, used
Pick up and view possible! Shop hours: Mon. - Fri .: 9:00 to 18:00 / Sat .: 9:00 to 13:00 Checked by our shop, technically sound. Including ball bearings. Condition see photos. For many FG and Carson Models.

€99.00*
Loading...
Upload in progress, please be patient ...
Shopware-Plugin Development Shopware-Theme Development