Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

Monster Truck Body shell for Carson and FG models, clear

Product information "Monster Truck Body shell for Carson and FG models, clear"

Pick up and view possible!
Shop hours:
Mon. - Fri .: 9:00 to 18:00 / Sat.: 9:00 to 13:00
Technically sound, may show some signs of wear.


Body dimensions: 

Length 750 mm 
Width 300 mm 
Wheelbase 465 mm


Body mounts need to be customized depending on the model. The body is untrimmed and unpainted.

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Similar products

Average rating of 0 out of 5 stars

y0784/23 Seat Toledo body shell with Repsol painting One of a kind
Defects:The color of the bodywork has been slightly altered by exposure to the sun in the window dressing (see photos).Fits 535 wheelbase

€390.00*

Average rating of 0 out of 5 stars

Elcon Cleon rear wing, clear
Genuine Elcon Cleon rear wing, clear.Painting tips:

€19.90*

Average rating of 0 out of 5 stars

y1453/02 Elastoplastic Losi 5ive-T/2.0 body shell, red, used
Decal sheet is attached. Body shell series is in mint, good condition!Delivered without roll cage!Extremely flexible 6-piece body shell for Losi 5ive-T, with complete installation hardware.Made of thermoplastic elastomer (TPE), an extremely strong plastic which combines thermoplastic and elastomeric properties! The elastoplastic body set fits the stock Losi 5ive-T roll cage precisely and is almost "unbreakable"! Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells.Of course, the extreme deformability of the elastoplastic body shell, compared to the stock version, is a huge advantage.And there's more with the elastoplastic body shell:Better dirt protection for the 5ive-T through partially closed wheel wells front and rear.Front and rear fenders with large cut-outs prevent contact with the tires.Integrated window nets allow for improved airflow and better engine cooling.The textured surface of the elastoplastic body shell is largely soil-resisting.Please note: This feature also makes the use of highly specialised adhesives for any kind of decals unavoidable if you want them to stay. All decals shown in the pictures for presentation are of the standard version!Even though the elastoplastic body shell is much tougher than the stock Losi 5ive-T body, the weight increase only very moderate from 902 grams to 971 grams. The body shell is a 6-piece design for best flexibility possible.Contents:1 x hood/front fender2 x side panels1 x roof2 x rear fenders1 x complete installation hardware

€179.00*

Average rating of 0 out of 5 stars

54140/01 FG body TR2 and TR4, painted exhibition piece
FG TR2/TR4 body from our showroom, ready painted. The rear holes for the body mounting are double drilled. See photos for scope of delivery and condition. 1 piece

€120.00*

Average rating of 0 out of 5 stars

Hemistorm Penta body set for Losi 5ive-T, painted white
1 set Hemistorm Penta body kit, 5-piece.  The body fits on the Losi 5ive-T cage. See photos for condition and scope of delivery.

€199.00*

Average rating of 0 out of 5 stars

Quad body for FG Monster Truck 2WD
Pick up and view possible! Shop hours: Mon. - Fri .: 9:00 to 18:00 / Sat.: 9:00 to 13:00 Technically sound, may show some signs of wear. New body with paint defects.

€100.00*

Average rating of 0 out of 5 stars

MCD Audi TT ready painted, wheelbase 520 mm, exhibition piece
Pick up and view possible! Shop hours: Mon. - Fri .: 9:00 to 18:00 / Sat.: 9:00 to 13:00 Technically sound, may show some signs of wear. painted Audi TT body shell by MCD with decals set applied. The body shell is an exhibition piece and shows several signs of use like a big paint burst and spilled glue on the front. Otherwise rather small scratches. Dimensions:Wheelbase: 520 mmWidth: 380 mmLength 860 mmHeight: 270 mm

€199.90*

Average rating of 0 out of 5 stars

y0784/31 BMW E46 body shell with Mafia team decals
Flaws:The paint flakes off at several points on body shell, mirrors or door handlesOne hole for the body mount is tornRequired body mounts:Mount front: Rear body mount:Side body mount front: Side body mount rear: Measures:Length: 890 mmWidth: 392 mmHeigth: 245 mmWheelbase: 530 mm

€269.90*

Average rating of 0 out of 5 stars

y0784/03 Audi A4 body shell with silver painting
Defects:Some glue remainingson the window frame.Small cut in the left fenderl. The body shell shows several signs of wear (see pics).Measurements:Lenght: 890mmWidth: 380mmHeight: 250mmWheel base: 535mm

€219.90*

Average rating of 0 out of 5 stars

Losi 5ive-T Race body with cage, used
1 piece Losi 5ive-T Race body tipped and painted with cage, used. The body has damage and cracks.  See photos for scope of delivery and condition.

€149.90*

Average rating of 0 out of 5 stars

Painted Porsche 962C body 1:5 for 530/535 mm wheelbase with rear spoiler, drilled
Suitable for 2WD models with a 535 wheelbase, such as FG, Carson and almost all other 1:5 touring cars. The body was deep-drawn from 2 mm thick Lexan. See photos for condition and drillings. Due to the low height of the body, the flatter airbox from FG with order number 9043 is required. Completely painted body for the 1:5 wheelbase 530/535 mm. With rear spoiler, wing mirrors and decal set. Body supports required: Front part: FG 7020/14 Front bumper Rear carrier: FG 7155 Rear body support Front side: FG 3014 Body support Rear side: FG 3014 Body mount Contents 1 piece

€249.00*

Customers also viewed

%

Average rating of 0 out of 5 stars

Walbro carburetor WT603B / WT990 / WT813A / WT1107 / WT1048 / WT668C
7355/08 FG Carburetor type: Walbro WT603BStandard carburetor for Zenoah G230/260. Carb has integrated choke. Typ: Walbro WT603BHowever, we recommend using the WT668C instead of the WT603B.This also has a choke, but the manufacturing quality of the WT668C is better than the WT603B!Optional ball bearing of the throttle shaft can be selected from the shops menu.y1483 Walbro WT-1048 Racing carburetorPopular performance carburetor without choke; with 13.5 mm venturi diameter, especially suitable for large-displacement engines like the Zenoah G320.The stock throttle shaft has been replaced with the proper version required for car applications; including the throttle lever as well.All existing throttle linkages can therefore be connected as usual without modifications.This carburetor does not feature a primer bulb nor a connection for a return line. It is therefore only connected to the supply line from the tank, the return line of the tank has to be closed.Optional ball bearing of the throttle shaft can be selected from the shops menu.y1067 Walbro WT668C carburetorThe Walbro WT668C carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc.The Walbro WT668C features an integrated choke with lever and a throttle shaft linkage lever. Optional ball bearing of the throttle shaft can be selected from the shops menu.Alternative: Walbro 603B also with chokey0251 Performance carburetor with accelerator pump type: WT-813AWalbro WT-813A carb with accelerator pump, improves low end response when the engine is tuned for maximum performance. 15.88mm bore, 12.7mm venturi. Ready for installation with modified shaft already installed. Fits Zenoah G230/240/260/270 engines and their CY/HPI Fuelie clones as well. Optional ball bearing of the throttle shaft can be selected from the shops menu.7855 FG Carburetor type: Walbro WT990Standard carburetor for Zenoah G240, G270 and G290. Typ: Walbro WT990 Optional ball bearing of the throttle shaft can be selected from the shops menu.y1016/051 Carburetor WT1107 G320RCGenuine Zenoah spare/option part. Standard part fits Zenoah G320RC.Optional ball bearing of the throttle shaft can be selected from the shops menu.

€59.90* €79.90* (25.03% saved)

Average rating of 0 out of 5 stars

305145 Tires and rims mounted & glued
Genuine Smartech/Carson spare/option part. Tire diameter 170 mm, tire width 80 mm, 18 mm wheel square. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Contents:1 pieceAlso suitable for:With the following wheel adapter: y1183 Rim adapter

€71.30*

Average rating of 0 out of 5 stars

7387 FG Rebuilt kit Zenoah G230, set
Cylinder-piston repair kit for Zenoah engine G230. Set includes the following parts:Cylinder, piston, piston ring, cylinder foot gasket, centering disks, piston pin clip.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€69.90*

Average rating of 0 out of 5 stars

MCD Audi TT ready painted, wheelbase 520 mm, exhibition piece
Pick up and view possible! Shop hours: Mon. - Fri .: 9:00 to 18:00 / Sat.: 9:00 to 13:00 Technically sound, may show some signs of wear. painted Audi TT body shell by MCD with decals set applied. The body shell is an exhibition piece and shows several signs of use like a big paint burst and spilled glue on the front. Otherwise rather small scratches. Dimensions:Wheelbase: 520 mmWidth: 380 mmLength 860 mmHeight: 270 mm

€199.90*

Average rating of 0 out of 5 stars

54140/01 FG body TR2 and TR4, painted exhibition piece
FG TR2/TR4 body from our showroom, ready painted. The rear holes for the body mounting are double drilled. See photos for scope of delivery and condition. 1 piece

€120.00*

Average rating of 0 out of 5 stars

8075/03 FG Karosserie-Set Alfa Romeo 156 WTCC 1 mm, lackiert
FG body kit Alfa Romeo 156 WTCC made of 1 mm Lexan, painted. The body kit consists of the main body, front body and rear spoiler and is is red/black, as shown in the photos.  The rear spoiler is painted black. The window frames have been painted black and the windows are slightly tinted. There are no holes drilled in the body and can therefore be fitted to any on-road RC car with a 530 mm wheelbase.  Body mounts required: Front part: FG 7020/10 Front bumper Rear carrier: FG 7152/01 Rear body supportFront side: FG 8013 Body support Rear side: FG 7014 Body support Dimensions: Length: 900 mm Width: 400 mm Height: 245 mm Wheelbase: 530 mm  Contents 1 piece

€249.00*

Average rating of 0 out of 5 stars

y0578, Alloy front shock tower for FG Sportsline and Off-Road 4WD, 1 pce.
Aluminum front shock tower for FG Off-Road Buggy and Sportsline 4WD, replaces stock plastic part FG #66287.Stock mounting hardware will be re-used.

€59.90*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency