Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

LOS254006/01 Suspension Arm Losi DBXL 1/5 4WD

Product information "LOS254006/01 Suspension Arm Losi DBXL 1/5 4WD"

Genuine Losi spare/option part. 

Content:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Alternatives

Average rating of 0 out of 5 stars

AT-DBXL 015 ATOP Lower front- and rear alloy a-arms for Losi Desert XL/XL-E / 2.0
Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum suspension arms for Losi DBXL. Set of four a-arms with plastic bushings for the hinge pins, all required nuts and bolts are included.Contents:2 pieces

€79.90*

Customers also bought

Average rating of 0 out of 5 stars

LOS253027 Losi Shock Boot Set, DBXL-E 2.0
Genuine Losi spare/option part. Contents:4 pieces

€19.99*

Average rating of 0 out of 5 stars

LOS253010 Shock springs, Complete Losi DBXL+MTXL 1/5 4WD
Genuine Losi spare/option part.

€39.99*
%

Average rating of 0 out of 5 stars

y0039 Oil for shock absorber, all viscosities, 100 ml
Genuine silicone shock absorber oil for the optimal shock absorber set-up. Content: 100 ml Please note: Factory filling of FG/Losi/Smartech and many other 1/5 and 1/6 scale shocks is done with genuine silicone shock absorber oil. To ensure seal tightness and consistency you should only use genuine silicone shock absorber oil for refilling as well.Most every rc-car shock absorber uses silicone oil of different viscosities. The smaller the number, the lower the viscosity of the silicone oil and the softer the damping. As a rule of thumb: Viscosity 100 = similar to water Viscosity 1.000 = similar to cooking oil Viscosity 5.000 = similar to shampoo Viscosity 10.000 = similar to honey As a reference: The red FG Marder / Off-Road Buggy series shock absorbers are factory filled with 2.000 viscosity oil, the shocks on monster cars with dual shock set-ups (total of 8 shocks) are filled with 1.000 viscosity oil, and the shocks on FG onroad cars come filled with 4.000 viscosity oil. The original filling of the Losi 5ive-T is 350cc silicone oil.FG Silicone oil with 100 ml:FG Item N° 66295/010 = Viscosity: 100 FG Item N° 66295/025 = Viscosity: 250FG Item N° 66295/035 = Viscosity: 350FG Item N° 66295/050 = Viscosity: 500FG Item N° 66295/075 = Viscosity: 750FG Item N° 66295/100 = Viscosity: 1000FG Item N° 66295/150 = Viscosity: 1500FG Item N° 66295/200 = Viscosity: 2000FG Item N° 66295/300 = Viscosity: 3000FG Item N° 66295/400 = Viscosity: 4000FG Item N° 66295/500 = Viscosity: 5000FG Item N° 66295/600 = Viscosity: 6000FG Item N° 66295/700 = Viscosity: 7000FG Item N° 66295/800 = Viscosity: 8000FG Item N° 66295/900 = Viscosity: 9000FG Item N° 66296 = Viscosity: 10000Viscosity of silicone oil at various temperatures.

Content: 100 Milliliter (€154.00* / 1000 Milliliter)

From €12.90* €15.40* (16.23% saved)

Average rating of 0 out of 5 stars

LOS254030 Losi Hinge Pin Braces, Front, Alum, Silver, MTXL
Genuine Losi spare/option part.Contents:2 pieces

€39.99*

Average rating of 0 out of 5 stars

LOS254009 Losi Hinge Pin Brace Inserts, Set Losi DBXL+MTXL 1/5 4WD
Genuine Losi spare/option part. Contents:1 set

€9.99*

Average rating of 0 out of 5 stars

Steering Rack & Hardware: DBXL-E/DBXL 2.0
Original Losi part.

€19.99*

Similar products

Average rating of 0 out of 5 stars

LOS252120 Losi Axle Boot Set 5mm Drive Pins DBXL-E 2.0
Genuine Losi spare/option part. Contents:10 pieces

€29.99*

Average rating of 0 out of 5 stars

LOS252067 Losi Diff Rebuild Kit, Al Diff Housing, DBXL-E
Genuine Losi spare/option part. Contents:1 set

€29.99*

Average rating of 0 out of 5 stars

LOS254005 Losi Uprights Carriers/Spindles/Hubs Losi DBXL+MTXL 1/5 4WD
Genuine Losi spare/option part. Contents:1 set

€39.99*

Average rating of 0 out of 5 stars

LOS252020 Universal Rebuild Kit (2): 1:5 4wd DBXL+MTXL
Genuine Losi spare/option part.Replacing the pins on DBXL drive shafts LOS252001, LOS252021, LOS252019: Remove set screw completelyOpen bench vise until the pin just fits between the jaws Position shaft on vice, held by a second person if necessaryDrive pin out with light hammer blows using a pin punch or a suitable comparable tool If Loctite was excessively used in the assembly, heating the shaft end may be required. Depending on the thread locking compound, you will strive for a value of 200 - 300°C. The shaft end must not be annealed! An annealed pin will mushroom on impact and make it very difficult to drive it out if not impossible. When installing the new pin from set LOS252020 make sure that the flat section of the pin is positioned under the set screw. The set screw should be just slightly tightened against the pin using high strength thread locker (link). Firm tightening puts the pin under preload and increases the risk of breakage!Contents:1 set

€11.99*

Average rating of 0 out of 5 stars

LOS254010 Losi Hinge Pin, Set Losi DBXL+MTXL 1/5 4WD
Genuine Losi spare/option part. Contents:1 set

€19.99*

Average rating of 0 out of 5 stars

LOS254006 Losi Suspension Arm Set Losi DBXL/DBXL-E/DBXL 2.0 1/5 4WD
Genuine Losi spare/option part. Content:4 pieces

€59.99*

Average rating of 0 out of 5 stars

LOS252065 Losi Pinion Gear, 14T, 1.5M, 8 mm Shaft
Genuine Losi spare/option part. Contents:1 piece

€19.99*

Average rating of 0 out of 5 stars

LOS254009 Losi Hinge Pin Brace Inserts, Set Losi DBXL+MTXL 1/5 4WD
Genuine Losi spare/option part. Contents:1 set

€9.99*

Average rating of 0 out of 5 stars

LOS252061 Losi Center Diff Spur Gear, 48T, DBXL-E
Genuine Losi spare/option part. Contents:1 piece

€49.99*

Average rating of 0 out of 5 stars

LOS252127 Losi Diff Shims, 24x21x0.3mm, DBXL-E 2.0
Genuine Losi spare/option part. Contents:10 pieces

€9.99*

Average rating of 0 out of 5 stars

Losi LOS250044 Body Set, Screened, DBXL-E 2.0
Genuine Losi spare/option part. Contents:1 set

€159.99*

Average rating of 0 out of 5 stars

LOS252066 Losi Diff Housing Set, Aluminum, DBXL-E
Genuine Losi spare/option part. Contents:1 set

€69.99*

Customers also viewed

Average rating of 0 out of 5 stars

ARA320482 ARRMA Aluminum Motor Mount red for Kraton / Outcast 8S
Genuine ARRMA spare/option part. Contents:1 pieces

€49.99*

Average rating of 0 out of 5 stars

LOS05001/02 Instruction Manual for Desert Buggy XL-E 2.0
Genuine Losi spare/option part. Genuine Instruction Manual.Printed instruction manual as included with every model.Languages:GermanEnglishFrenchItalianContents:1 piece

€19.90*

Average rating of 0 out of 5 stars

LOS250055 Losi Wing, FOX Racing, DBXL-E 2.0
Genuine Losi spare/option part. Contents:1 piece

€29.99*

Average rating of 0 out of 5 stars

y1409/01 GIANT GRIP tires on MadMax Extreme rims for Losi and HPI, pair
GIANT GRIP 190 x 70 with black colored MadMax Extreme rims, 20-fold screwed, very tough, with 24 mm hex drive and reinforced orange beadlock rings for Losi 5ive-T and Desert-Buggy XL as well as all HPI Baja 5 B/T cars.The GIANT GRIP provides giant traction through 96 about one cm² wide and 5 mm high strong lugs, getting ample grip even on loose surfaces like sand and soil.Due to the extreme strain caused by the GIANT GRIP tires the MadMax rim with reinforcement ring had to be optimized once more.The GIANT GRIP tires come with strong special tire inserts which allow to transfer the power without canting, even on heavy cars like the Losi 5ive-T.Dimensions:Outer diameter: 190 mmTire width at bead 70 mmTread width 80 mmReinforced 24 mm hex wheel driveThe MadMax Giant Grip tires use 60 mm wide rims ( y1415/01 or y0761/01).The video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!

From €64.90*

Average rating of 0 out of 5 stars

TT1027 Top Tuning High-performance fan 50 x 50 x 15 mm
Genuine Top Tuningspare/option part. High performance fan as upgrade for various applications in electric models.The size 50 x 50 x 15 mm can be swapped e.g. for the fan of the ARRMA motor cooling unit or the fans of different speed controllers (e.g. ZTW Beast 200A). The ARRMA application requires approx. 5 mm longer screws due to the 5 mm taller fan (M4x25).The air flow rate is much higher than with the standard units!The operating voltage of the fan with 5 - 8.4 V is perfectly adapted to these requirements. Technical data: Dimensions: 50 x 50 x 15 mm Operating voltage: 5 8.4 V Current: 0.65A Speed: 10,000 rpm @ 8.4 V Air flow: 28.3 cfm Connector: BEC female Cable length: approx. 30 cm Contents:1 piece

€17.90*

Average rating of 0 out of 5 stars

AT-DBXL011 ATOP Complete Aluminum transmission case for Losi DBXL/DBXL-E + MTXL
Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum transmission case by ATOP for Losi DBXL/DBXL-E and MTXL, front and rear.Service life of ball bearings and ring & pinion will greatly benefit from the increased strength of this aluminum case.Contents:1 piece

€149.90*

Average rating of 0 out of 5 stars

LOS351017 Losi Servo Saver Top, Aluminum, Black, DBXL-E 2.0
Genuine Losi spare/option part. Contents:1 piece

€29.99*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Plugin Development