EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm
Go to homepage
Quick shipping until 14 o'clock
PartScout
€0.00*
Quick shipping until 14 o'clock

LOS253028 Losi Shock Rebuild Kit, DBXL-E 2.0

€19.99*

Prices incl. VAT plus shipping costs

Available

Product number: losi_los253028
EAN: 4058575139256

Product information "LOS253028 Losi Shock Rebuild Kit, DBXL-E 2.0"

Genuine Losi spare/option part.

Contents:
  • 1 set

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Customers also bought

LOS252019 Front Center Driveshaft Losi DBXL 1/5 4WD
LOS252019 Front Center Driveshaft Losi DBXL 1/5 4WD
Genuine Losi spare/option part. Replacing the pins on DBXL drive shafts LOS252001, LOS252021, LOS252019: Remove set screw completelyOpen bench vise until the pin just fits between the jaws Position shaft on vice, held by a second person if necessaryDrive pin out with light hammer blows using a pin punch or a suitable comparable tool If Loctite was excessively used in the assembly, heating the shaft end may be required. Depending on the thread locking compound, you will strive for a value of 200 - 300°C. The shaft end must not be annealed! An annealed pin will mushroom on impact and make it very difficult to drive it out if not impossible. When installing the new pin from set LOS252020 make sure that the flat section of the pin is positioned under the set screw. The set screw should be just slightly tightened against the pin using high strength thread locker (link). Firm tightening puts the pin under preload and increases the risk of breakage!Contents:1 piece

€59.99*
LOS252021 Driveshaft rear center Losi DBXL 1/5 4WD
LOS252021 Driveshaft rear center Losi DBXL 1/5 4WD
Genuine Losi spare/option part. Replacing the pins on DBXL drive shafts LOS252001, LOS252021, LOS252019: Remove set screw completelyOpen bench vise until the pin just fits between the jaws Position shaft on vice, held by a second person if necessaryDrive pin out with light hammer blows using a pin punch or a suitable comparable tool If Loctite was excessively used in the assembly, heating the shaft end may be required. Depending on the thread locking compound, you will strive for a value of 200 - 300°C. The shaft end must not be annealed! An annealed pin will mushroom on impact and make it very difficult to drive it out if not impossible. When installing the new pin from set LOS252020 make sure that the flat section of the pin is positioned under the set screw. The set screw should be just slightly tightened against the pin using high strength thread locker (link). Firm tightening puts the pin under preload and increases the risk of breakage!

€59.99*
Details
LOS252133 F/R Center Drive Pinion Coupler DBXL 2.0
LOS252133 F/R Center Drive Pinion Coupler DBXL 2.0
Genuine Losi spare/option part. Contents:1 set

€29.99*
LOS55009 Losi Air Filter Foam Elements DBXL 2.0
LOS55009 Losi Air Filter Foam Elements DBXL 2.0

€19.99*
LOS252125 Losi Universal Rebuild Kit, 4,6mm Pin, DBXL-E 2.0
LOS252125 Losi Universal Rebuild Kit, 4,6mm Pin, DBXL-E 2.0
Genuine Losi spare/option part. Contents:2 pieces

€9.99*
LOS252016 20T Pinion Gear Losi DBXL 1/5 4WD
LOS252016 20T Pinion Gear Losi DBXL 1/5 4WD
Genuine Losi spare/option part. Contents:1 piece

€19.99*

Similar products

LOS252120 Losi Axle Boot Set 5mm Drive Pins DBXL-E 2.0
LOS252120 Losi Axle Boot Set 5mm Drive Pins DBXL-E 2.0
Genuine Losi spare/option part. Contents:10 pieces

€29.99*
LOS254009 Losi Hinge Pin Brace Inserts, Set Losi DBXL+MTXL 1/5 4WD
LOS254009 Losi Hinge Pin Brace Inserts, Set Losi DBXL+MTXL 1/5 4WD
Genuine Losi spare/option part. Contents:1 set

€9.99*
LOS254006/01 Suspension Arm Losi DBXL 1/5 4WD
LOS254006/01 Suspension Arm Losi DBXL 1/5 4WD
Genuine Losi spare/option part. Content:1 piece

€16.90*
LOS252064 Losi Pinion Gear, 13T, 1.5M, 8 mm Shaft
LOS252064 Losi Pinion Gear, 13T, 1.5M, 8 mm Shaft
Genuine Losi spare/option part. Contents:1 piece

€19.99*
LOS352009 Losi Wheel Nut, Captured, Black, DBXL-E 2.0
LOS352009 Losi Wheel Nut, Captured, Black, DBXL-E 2.0
Genuine Losi spare/option part. Contents:4 pieces

€39.99*
LOS252125 Losi Universal Rebuild Kit, 4,6mm Pin, DBXL-E 2.0
LOS252125 Losi Universal Rebuild Kit, 4,6mm Pin, DBXL-E 2.0
Genuine Losi spare/option part. Contents:2 pieces

€9.99*
LOS253027 Losi Shock Boot Set, DBXL-E 2.0
LOS253027 Losi Shock Boot Set, DBXL-E 2.0
Genuine Losi spare/option part. Contents:4 pieces

€19.99*
LOS252127 Losi Diff Shims, 24x21x0.3mm, DBXL-E 2.0
LOS252127 Losi Diff Shims, 24x21x0.3mm, DBXL-E 2.0
Genuine Losi spare/option part. Contents:10 pieces

€9.99*
LOS252020 Universal Rebuild Kit (2): 1:5 4wd DBXL+MTXL
LOS252020 Universal Rebuild Kit (2): 1:5 4wd DBXL+MTXL
Genuine Losi spare/option part.Replacing the pins on DBXL drive shafts LOS252001, LOS252021, LOS252019: Remove set screw completelyOpen bench vise until the pin just fits between the jaws Position shaft on vice, held by a second person if necessaryDrive pin out with light hammer blows using a pin punch or a suitable comparable tool If Loctite was excessively used in the assembly, heating the shaft end may be required. Depending on the thread locking compound, you will strive for a value of 200 - 300°C. The shaft end must not be annealed! An annealed pin will mushroom on impact and make it very difficult to drive it out if not impossible. When installing the new pin from set LOS252020 make sure that the flat section of the pin is positioned under the set screw. The set screw should be just slightly tightened against the pin using high strength thread locker (link). Firm tightening puts the pin under preload and increases the risk of breakage!Contents:1 set

€11.99*
LOS254006 Losi Suspension Arm Set Losi DBXL/DBXL-E/DBXL 2.0 1/5 4WD
LOS254006 Losi Suspension Arm Set Losi DBXL/DBXL-E/DBXL 2.0 1/5 4WD
Genuine Losi spare/option part. Content:4 pieces

€59.99*
Losi LOS250044 Body Set, Screened, DBXL-E 2.0
Losi LOS250044 Body Set, Screened, DBXL-E 2.0
Genuine Losi spare/option part. Contents:1 set

€159.99*
LOS351018 Losi Front Top Plate, Aluminum, Black, DBXL-E 2.0
LOS351018 Losi Front Top Plate, Aluminum, Black, DBXL-E 2.0
Genuine Losi spare/option part. Contents:1 piece

€39.99*
Details

Customers also viewed

LOS253026 Losi Shock Body Set, Silver with Fox Caps (2): DBXL-E 2.0
LOS253026 Losi Shock Body Set, Silver with Fox Caps (2): DBXL-E 2.0
Genuine Losi spare/option part. Contents:1 set

€79.99*
This website uses cookies to ensure the best experience possible. More information.... By clicking on "[Agree / Accept all / etc.]" you also give your consent to the disclosure of your behavior in our store to our partner, shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany), which cannot assign this data to you personally, but may process it for its own purposes (e.g. product improvements, market behavior analyses).
Upload in progress, please be patient ...
Shopware-Agency Shopware-Plugin Development