AKX009 GPM aluminum hinge pin brackets rear axle, lower, for Arrma Kraton / Outcast 8S

€29.90*

Prices incl. VAT plus shipping costs

Available

Product number: gpm_akx009

EAN: 4894538339215

Product information "AKX009 GPM aluminum hinge pin brackets rear axle, lower, for Arrma Kraton / Outcast 8S"

Genuine GPM spare/option part.

GPM aluminum lower hinge pin brackets rear axle for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. With this set, the multi-part front bracket is replaced by a one-piece design with plastic bushings.

(Replaces original sets ARA330555, ARA330588 and ARA330557)

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

AKX005 GPM Closed wheel nuts for Arrma Kraton/Outcast 8S

Genuine GPM spare/option part. Closed wheel nuts made of 6061T6 aluminum from GPM, suitable for Arrma Kraton/Outcast 8S.Secure hold of the rim due to large flange with 34 mm diameter and serrated surface.Wrench size: 24 mmThread size: M18x1,0Thread depth: 9 mmContents:4 pieces

€19.90*

AKX055 GPM front lower aluminum a-arms for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM front lower aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushing for the wishbone pin.(Direct replacement for original set ARA330589)Contents:2 pieces

€59.90*

AKX056 GPM rear lower aluminum a-arms for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM rear lower aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushing for the wishbone pin.Comes complete with outer wishbone pins (replaces original sets ARA330590 and ARA330564).Contents:2 pieces

€59.90*

AKX008 GPM aluminum hinge pin brackets front suspension, lower, for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. Milled 6061T6 aluminum additional heat sink from GPM with larger 12 volt fan (60 x 60 x 15 mm) for Arrma Kraton / Outcast 8S. The additional heat sink also serves as an adapter plate to mount the larger fan on the original heat sink. A machined contact guard for the intake side of the fan is also included.The fan is connected to the EC5 connector of a 3S or 4S drive battery using an adapter cable (included). Thus, the operating current does not have to be provided by the ESC's BEC.The overall height of the unit, measured from the bottom of the additional heat sink is about 30 mm.Contents:2 pieces

€29.90*

AKX040 GPM Aluminum wheelie bar with wing mount for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. Milled 6061T6 aluminum wheelie bar with wing mount for Arrma Kraton / Outcast 8S.Significantly stronger than the stock part, it also offers an adjustment option for the angle of the wing.Double ball bearing 55 mm diameter wheels made of Delrin with replaceable O-rings as "tread".Contents:1 set

€84.90*

AKX054 GPM aluminum a-arms front upper for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM front upper aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushings for the wishbone pin.Comes complete with wishbone pins (direct replacement for original sets ARA330561 and ARA330564).Contents:2 pieces

€39.90*

MAKX024N GPM Aluminum servo saver with spring, 25T, with servo adapter frame, Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. Servo saver machined from 7075 T6 aluminum by GPM for Kraton / Outcast 8S. Much stronger than the stock plastic part.Fits servos with 25T spline shaft.Comes with a 6061 aluminum adapter frame for installation of a small steering servo (40/20/20 size).Note: due to the replacement of standard servo, the center point of servo is slightly offset, so the length of the servo linkage needs to be adjusted.Contents:1 set

€44.90*

AKX162 GPM all-metal steering rods for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. All-metal steering rods from GPM made of 6061T6 aluminum and stainless steel for Arrma Kraton / Outcast 8S. Thanks to clamping device on the ball cups, no lock nuts are required.Contents:1 set

€39.90*

AKX030 GPM rear shock tower for Arrma Kraton / front and rear Outcast 8S

Genuine GPM spare/option part. GPM rear shock tower for Arrma Kraton / front and rear Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts.The scope of delivery also includes the necessary screws!Direct replacement for original part ARA320476.Contents:1 piece

€49.90*

AKX038 GPM center gear box for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM center gear box for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts, with a more secure fit for the ball bearings and constant backlash even under high loads.(Direct replacement for original set ARA310930)Contents:1 set

€129.90*

AKX160S/SH GPM steering rods / camber rods for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM steering rods / camber rods for Arrma Kraton / Outcast 8S made of stainless steel. (Replaces 2x original set ARA340156)Contents:4 pieces

€27.90*

AKX025F GPM front chassis strut for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. GPM chassis strut front for Arrma Kraton (version 1 and 2) / Outcast 8S, one-piece design for greater rigidity, without screwed-on plastic heads.(Replaces original strut ARA320550 with heads ARA320477).Contents:1 piece

€24.90*

Customers also viewed

MAKX187R GPM shocks for Arrma Kraton / Outcast 8S, f/r

Genuine GPM spare/option part. These GPM shocks are basically the same as the piggyback version, just without the piggyback. This allows for a more budget-friendly price.Shocks come in pairs including all-metal lower ball joints, spring perches and two pairs of springs with 2.6 mm and 2.8 mm wire diameter. Reinforced shock shafts with 6 mm diameter.Fits Arrma Kraton 8S rear as well as Outcast 8S front and rear applications!Length extended/compressed (center-to-center of mounting points): approx. 190 mm/131 mm.Contents:2 pieces

€69.90*

AKX056 GPM rear lower aluminum a-arms for Arrma Kraton / Outcast 8S

€59.90*

AKX040 GPM Aluminum wheelie bar with wing mount for Arrma Kraton / Outcast 8S

€84.90*

AKX054 GPM aluminum a-arms front upper for Arrma Kraton / Outcast 8S

€39.90*

AKX005 GPM Closed wheel nuts for Arrma Kraton/Outcast 8S

€19.90*

y0565 RC-Tech Flexa Fix body shell glue

Genuine HT spare/option part. For all epoxy models, plastic and polycarbonate/lexan body repairs!Direction of use:Use a brush or other applicator. Apply enough Flexa Fix to the damaged area. Be careful not to apply too much in one go as it can be difficult to manipulate. If necessary apply two or three coats to build up the joint area. Use epoxy blanket of pieces of polycarbonate (Lexan) to re-enforce if necessary.You can also use the Flexa Fix to re-enforce the body corners (let the pure product leak into the corners) or to make flexible battery packs.Contents:1 piece / 100 ml

Content: 100 Milliliter (€109.00* / 1000 Milliliter)

€10.90*

SB237S/PINS-OC GPM Replacement bolts for Losi Super Baja/ 2.0 / Rock Rey

Genuine GPM spare/option part. Stainless steel replacement bolts fit not only GPM driveshafts SB237S, but Losi stock driveshafts LOS252072 and LOS252110 as well. Contents:2 pieces / 1 pair

€4.90*