Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

AKX162 GPM all-metal steering rods for Arrma Kraton / Outcast 8S

Product information "AKX162 GPM all-metal steering rods for Arrma Kraton / Outcast 8S"

Genuine GPM spare/option part.

All-metal steering rods from GPM made of 6061T6 aluminum and stainless steel for Arrma Kraton / Outcast 8S. Thanks to clamping device on the ball cups, no lock nuts are required.

Contents:
  • 1 set

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

AT-DBXL002 ATOP aluminum camber rods/steering rods for Losi DBXL/DBXL-E
Genuine ATOP spare/option part. Camber rods for Losi DBXL with center section cnc-machined from 6061 aluminum by ATOP. High grade all-metal ball joints at the pivot points provide zero backlash and strength. Fits front and rear.Attention: On a DBXL-E 2.0 these rods can only be used as camber rods, not as steering rods! Dimensions: Hole to hole: 117mm Total length: 135mm Contents:2 pieces

€34.90*

Average rating of 0 out of 5 stars

y1218 Springs for drive shafts
Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece

€4.90*

Average rating of 0 out of 5 stars

y0305 Colored flexible fuel line, top quality, 1 meter
y0305 Color: y0305/02 - Blue
High quality flexible fuel line in your choice of blue, red, yellow, orange and green. Size:Length: approx. 1 meterOuter diameter: approx. 6.3 mmInner diameter: approx. 3.2 mmDiameters are 100% identical to the Zenoah Tygon hose #7352!

€5.90*

Similar products

%

Average rating of 0 out of 5 stars

AKX054 GPM aluminum a-arms front upper for Arrma Kraton / Outcast 8S
Genuine GPM spare/option part. GPM front upper aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushings for the wishbone pin.Comes complete with wishbone pins (direct replacement for original sets ARA330561 and ARA330564).Contents:2 pieces

€39.90* €49.90* (20.04% saved)

Average rating of 0 out of 5 stars

AKX040 GPM Aluminum wheelie bar with wing mount for Arrma Kraton / Outcast 8S
Genuine GPM spare/option part. Milled 6061T6 aluminum wheelie bar with wing mount for Arrma Kraton / Outcast 8S.Significantly stronger than the stock part, it also offers an adjustment option for the angle of the wing.Double ball bearing 55 mm diameter wheels made of Delrin with replaceable O-rings as "tread".Contents:1 set

€84.90*
%

Average rating of 0 out of 5 stars

AKX055 GPM front lower aluminum a-arms for Arrma Kraton / Outcast 8S
Genuine GPM spare/option part. GPM front lower aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushing for the wishbone pin.(Direct replacement for original set ARA330589)Contents:2 pieces

€59.90* €74.90* (20.03% saved)
%

Average rating of 0 out of 5 stars

AKX056 GPM rear lower aluminum a-arms for Arrma Kraton / Outcast 8S
Genuine GPM spare/option part. GPM rear lower aluminum a-arms for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts and with an exchangeable plastic bushing for the wishbone pin.Comes complete with outer wishbone pins (replaces original sets ARA330590 and ARA330564).Contents:2 pieces

€59.90* €74.90* (20.03% saved)

Average rating of 0 out of 5 stars

AKX005 GPM Closed wheel nuts for Arrma Kraton/Outcast 8S
Genuine GPM spare/option part. Closed wheel nuts made of 6061T6 aluminum from GPM, suitable for Arrma Kraton/Outcast 8S.Secure hold of the rim due to large flange with 34 mm diameter and serrated surface.Wrench size: 24 mmThread size: M18x1,0Thread depth: 9 mmContents:4 pieces

€19.90*

Average rating of 0 out of 5 stars

AKX028 GPM front shock tower for Arrma Kraton / Outcast 8S
Genuine GPM spare/option part. GPM front shock tower for Arrma Kraton 8S, CNC- machined from 6061-T6 aluminum. More torsion-resistant than the standard plastic parts.The scope of delivery also includes the necessary screws!Direct replacement for original part ARA320475.Contents:2 pieces

€49.90*

Average rating of 0 out of 5 stars

MAKX021 GPM Aluminum front spindles, Arrma Kraton / Outcast 8S
Genuine GPM spare/option part. Front spindles from GPM for Arrma Kraton / Outcast 8S, machined from 6061 aluminum. Extremely torsion-resistant and robust.Contents:2 pieces

€64.90*

Average rating of 0 out of 5 stars

MAKX187R GPM shocks for Arrma Kraton / Outcast 8S, f/r
Genuine GPM spare/option part. These GPM shocks are basically the same as the piggyback version, just without the piggyback. This allows for a more budget-friendly price.Shocks come in pairs including all-metal lower ball joints, spring perches and two pairs of springs with 2.6 mm and 2.8 mm wire diameter. Reinforced shock shafts with 6 mm diameter.Fits Arrma Kraton 8S rear as well as Outcast 8S front and rear applications!Length extended/compressed (center-to-center of mounting points): approx. 190 mm/131 mm.Contents:2 pieces

€69.90*

Average rating of 0 out of 5 stars

MAKX015FA Front Brace Mount CNC Aluminum Kraton / Outcast 8S
Genuine GPM spare/option part. Same effect as Arrma option part ARA320615, but for a fracture of the price!Contents:1 piece

€13.90*

Average rating of 0 out of 5 stars

MAOX025 GPM chassis struts for Arrma Outcast 8S Vers.2
Genuine GPM spare/option part. GPM chassis struts front / middle / rear for Arrma Outcast 8S version 2 (chassis struts), one-piece design for greater rigidity, without screwed-on plastic heads.(Replaces original struts ARA320550 / ARA320560/ ARA320595/ ARA320596 with heads ARA320477)Contents:1 set

€69.90*

Average rating of 0 out of 5 stars

AKX018 GPM additional heat sink with fan for Arrma Kraton / Outcast 8S
Genuine GPM spare/option part. Milled 6061T6 aluminum additional heat sink from GPM with larger 12 volt fan (60 x 60 x 15 mm) for Arrma Kraton / Outcast 8S. The additional heat sink also serves as an adapter plate to mount the larger fan on the original heat sink. A machined contact guard for the intake side of the fan is also included.The fan is connected to the EC5 connector of a 3S or 4S drive battery using an adapter cable (included). Thus, the operating current does not have to be provided by the ESC's BEC.The overall height of the unit, measured from the bottom of the additional heat sink is about 30 mm.Contents:1 set

€39.90*

Average rating of 0 out of 5 stars

AKX048 GPM steering assembly for Arrma Kraton / Outcast 8S
Genuine GPM spare/option part. GPM steering assembly for Arrma Kraton / Outcast 8S, CNC- machined from 6061-T6 aluminum and with 8 ball bearings. More torsion-resistant, less slack and friction than with the standard plastic parts.The scope of delivery includes replacements for original parts ARA320474, ARA340153, ARA340160 as well as ball bearings and screws.The standard steering posts ARA340159 will be re-used!Contents:1 set

€89.90*

Customers also viewed

Average rating of 0 out of 5 stars

- PMT - Supreme V4-Q01 (Super Soft)
Exciting news for the modeling world: Introducing the new 1:5 Supreme V4.With a fresh design and innovative tread patterns for even higher performance. We are thrilled to present the 1:5 Supreme V4 – our revolutionary tire for the world of four-wheeled modeling. The new V4 aims to raise the bar in competitions and cater to the needs of drivers. It features a redesigned tread with new patterns meticulously crafted for enhanced performance.  Let’s see its key features: Exceptional Grip: Advanced tread patterns for unparalleled traction on various asphalt conditions. Simplified Driving: Superior control for a smoother and more effective driving experience. Enhanced Durability: Thanks to the new tread design, the tire’s performance remains consistent even in longer sessions. Available in Three Different Compounds.  Like all our products, the V4 is available in various compounds to accommodate different asphalt conditions: - Q01 – SuperSoft - Q03 – Soft - Q05 – Medium Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability.Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!Dimension:Outside diameter: approx. 116 mmWidth: approx. 65 mmRims: 18 mm square driveContents:2 piece

€45.90*

Average rating of 0 out of 5 stars

y0782 Electrogalvanized M8 steel turnbuckles - all lengths, 2 pcs.
gewinde_0005 Length: 7076/01 54 mm+ 2EUR
Electrogalvanized M8 steel turnbuckles right/left available in different lengths.Order no.Length:6100/03M8 left/right36 mm6100/04M8 left/right40 mm7076/01M8 left/right54 mm6076/01M8 left/right61 mmy0988M8 left/right75 mmThe 75 mm version is especially for installation of HT upper rear alloy a-arms in Carson Comanche, Attack Evo, CRT + CPT cars.

Variants from €9.90*
€11.90*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency